ports/devel/linux_libusb builds FreeBSD libusb with GCC 4.8.5
from devel/linux-c7-devtools. Restore the tests for older GCC
in bsd.sys.mk to accomodate such ports.
Reported by: tijl
Sponsored by: Dell EMC Isilon
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
Add a 'native_blocksize' member to 'struct enc_xform' that ciphers can
use if they support a partial final block. This is particular useful
for stream ciphers, but can also apply to other ciphers. cryptosoft
will only pass in native blocks to the encrypt and decrypt hooks. For
the final partial block, 'struct enc_xform' now has new
encrypt_last/decrypt_last hooks which accept the length of the final
block. The multi_block methods are also retired.
Mark AES-ICM (AES-CTR) as a stream cipher. This has some interesting
effects on IPsec in that FreeBSD can now properly receive all packets
sent by Linux when using AES-CTR, but FreeBSD can no longer
interoperate with OpenBSD and older verisons of FreeBSD which assume
AES-CTR packets have a payload padded to a 16-byte boundary. Kornel
has offered to work on a patch to add a compatiblity sysctl to enforce
additional padding for AES-CTR in esp_output to permit compatibility
with OpenBSD and older versions of FreeBSD.
AES-XTS continues to use a block size of a single AES block length.
It is possible to adjust it to support partial final blocks by
implementing cipher text stealing via encrypt_last/decrypt_last hooks,
but I have not done so.
Reviewed by: cem (earlier version)
Tested by: Kornel Dulęba <mindal@semihalf.com> (AES-CTR with IPsec)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24906
The flush is needed to prevent cross-process ret2spec, which is not handled
on kernel entry if IBPB is enabled but SMEP is present.
While there, add i386 RSB flush.
Reported by: Anthony Steinhauser <asteinhauser@google.com>
Reviewed by: markj, Anthony Steinhauser
Discussed with: philip
admbugs: 961
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
-development is long and awkward, and is also inconsistent with prior art
from the Linux world, which uses -dev (Debian) or -devel (Red Hat). Follow
the Debian convention, and similarly for debug info packages.
Also remove redundant pkgbase development tag from includes. We already tag
include files with package=runtime,dev; there is no need to separately tag
them as dev.
Discussed with: bapt
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24139
This man page contains stat utilities that are available in
the base system. This is a better approach than looking them
up via "apropos stat" or similar commands.
Thanks to Daniel Ebdrup Jensen for writing the original page
and incorporating the feedback given.
Submitted by: Daniel Ebdrup Jensen
Reviewed by: 0mp, allanjude, brueffer, bcr
Approved by: bcr
MFC after: 3 days
Relnotes: yes (new stats(7) man page)
Differential Revision: https://reviews.freebsd.org/D24417
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Reviewed by: jhb
MFC after: i² days
Differential Revision: yes (see 2/2)
There are no in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24775
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
There are no longer any in-kernel consumers. The software
implementation was also a non-functional stub.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24771
They no longer have any in-tree consumers. Note that these are a
different from MD5-HMAC and SHA1-HMAC and were only used with IPsec.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24770
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Although a few drivers supported this algorithm, there were never any
in-kernel consumers. cryptosoft and cryptodev never supported it,
and there was not a software xform auth_hash for it.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24767
pf by default does not do per-table address accounting unless the
"counters" keyword is specified in the corresponding pf.conf table
definition. Yet, we always allocate 12 per-CPU counters per table. For
large tables this carries a lot of overhead, so only allocate counters
when they will actually be used.
A further enhancement might be to use a dedicated UMA zone to allocate
counter arrays for table entries, since close to half of the structure
size comes from counter pointers. A related issue is the cost of
zeroing counters, since counter_u64_zero() calls smp_rendezvous() on
some architectures.
Reported by: loos, Jim Pingle <jimp@netgate.com>
Reviewed by: kp
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D24803
It can be dangerous and there is no need for it in the kernel.
Inspired by Kees Cook's change in Linux, and later OpenBSD.
Reviewed by: cem, gordon, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24760
for custom vendor-specific changes to FreeBSD's
default settings.
While here, fix a typo: perfomance -> performance
PR: 245404
Submitted by: Jose Luis Duran
BINUTILS is needed only for ports, and will be disabled once the failing
ports are addressed (likely by growing a binutils dependency).
BINUTILS_BOOTSTRAP is needed only on amd64, for skein_block_asm.s. There
is no need to enable it on i386.
This will all be removed before FreeBSD 13.0.
With the removal of in-tree consumers of DES, Triple DES, and
MD5-HMAC, the only algorithm this driver still supports is SHA1-HMAC.
This is not very useful as a standalone algorithm (IPsec AH-only with
SHA1 would be the only user).
This driver has also not been kept up to date with the original driver
in OpenBSD which supports a few more cards and AES-CBC on newer cards.
The newest card currently supported by this driver was released in
2005.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24691
source that works or is the new location on the
same page.
Submitted by: alfix86_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23769
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
- Abbreviated month name in .Dd
- position of HISTORY section
- alphabetical ordering within SEE ALSO section
- adding .Ed before .Sh DESCRIPTION
- remove trailing whitespaces
- Line break after a sentence stop
- Use BSD OS macros instead of hardcoded strings
No .Dd bumps as there was no actual content change made
in any of these pages.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24591
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
- Inconsistencies in .Dd like abbreviated month names,
"th" after numbers, or leading zeros
- No line breaks after a sentence stop
- Whitespace at the end of the line
- Use macros for BSD OS names instead of hardcoded names
- CAVEATS instead of CAVEAT in section name
No actual content change in terms of additions were made, so
no bump of the .Dd for these man pages.
All of these issues were found and fixed by Gordon Bergling.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24648
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
