Some notable improvements include:
readelf:
- Add AArch64 relocation definitions.
- Report value of unknown relocation types.
elfcopy:
- Consider symbols with STB_GNU_UNIQUE binding as global symbols.
- Fixed support for VMA adjustment for loadable sections found
in relocatable objects.
- Handle nameless global symbols.
- Improve wildcard matching for !-prefixed symbols.
- Add PE/COFF support.
elfdump:
- Improve section type reporting.
- Add MIPS-specific section types.
This update also includes a significant number of bug fixes.
PR: 207091 [exp-run]
Sponsored by: The FreeBSD Foundation
to the end of the function, but did not remove a fetch_close() call which
was made redundant by the one in the shared error-handling code.
PR: 206774
Submitted by: Christian Heckendorf <heckendorfc@gmail.com>
MFC after: 3 days
do not participate in the global symbols namespace, but rtld locks are
still replaced and functions are interposed. In particular,
__pthread_map_stacks_exec is resolved to the libc version. If a
library is loaded later, which requires adjustment of the stack
protection mode, rtld calls into libc __pthread_map_stacks_exec due to
the symbols scope. The libc version might recurse into binder and
recursively acquire rtld bind lock, causing the hang.
Make libc __pthread_map_stacks_exec() interposed, which synchronizes
rtld locks and version of the stack exec hook when libthr loaded,
regardless of the symbol scope control or symbol resolution order.
The __pthread_map_stacks_exec() symbol is removed from the private
version in libthr since libc symbol now operates correctly in presence
of libthr.
Reported and tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
time ago, but for some reason it was not. Basically, without this change
dlopen(3)'ing an empty .so file would just cause application to dump core
with SIGSEGV.
Make sure the file has enough data for at least the ELF header before
mmap'ing it.
Add a test case to check that dlopen an empty file return an error.
There were a separate discussion as to whether it should be SIGBUS
instead when you try to access region mapped from an empty file,
but it's definitely SIGSEGV now, so if anyone want to check that please
be my guest.
Reviewed by: mjg, cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5112
wraps sendmsg(2) and recvmsg(2) into batch send and receive operation.
The goal of this implementation is only to provide API compatibility
with Linux.
The cancellation behaviour of the functions is not quite right, but
due to relative rare use of cancellation it is considered acceptable
comparing with the complexity of the correct implementation. If
functions are reimplemented as syscalls, the fix would come almost
trivial. The direct use of the syscall trampolines instead of libc
wrappers for sendmsg(2) and recvmsg(2) is to avoid data loss on
cancellation.
Submitted by: Boris Astardzhiev <boris.astardzhiev@gmail.com>
Discussed with: jilles (cancellation behaviour)
MFC after: 1 month
GCC 5.2.0 generates the following [fatal] warning:
dialog_util.c:270:23: error:
zero-length gnu_printf format string [-Werror=format-zero-length]
sprintf(dargv[n++], "");
Fix malloc argument while here, removing sprintf.
Reported by: Ruslan Bukin <ruslan.bukin at cl cam ac uk>
dialog(3)'s dlg_reallocate_gauge(), used both by dialog(3)'s dialog_gauge()
and dialog(1)'s `--gauge', will segmentation fault in strlen(3) if no title
is set for the widget. Reproducible with `dialog --gauge hi 6 20' (adding
`--title ""' is enough to prevent segmentation fault).
MFC after: 3 days
X-MFC-to: stable/10
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
This avoids reproducing the lex logic which had dependencies set wrong
and used an intermediate file for modifying the YY_BUF_SIZE.
This has only been possible since flex 2.5.37 was imported in r250873,
which uses #ifndef YY_BUF_SIZE.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
nslexer.o depends on nsparser.h, which is already added by bsd.lib.mk
and .depend.
This reverts r237402.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Similar to dialog(3) keep_tite option used to prevent visually disturbing
initialization or exit that could occur when run from a script using
dpv(3) by way of dpv(1) in sequence with other dialog(1) invocations.
A new sysdecode_syscallname() function accepts a system call code and
returns a string of the corresponding name (or NULL if the code is
unknown). To support different process ABIs, the new function accepts a
value from a new sysdecode_abi enum as its first argument to select the
ABI in use. Current ABIs supported include FREEBSD (native binaries),
FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are
supported by all platforms. In general, a given ABI is only supported
if a platform can execute binaries for that ABI.
To simplify the implementation, libsysdecode's build reuses the
existing pre-generated files from the kernel source tree rather than
duplicating new copies of said files during the build.
kdump(1) and truss(1) now use these functions to map system call
identifiers to names. For kdump(1), a new 'syscallname()' function
consolidates duplicated code from ktrsyscall() and ktrsyscallret().
The Linux ABI no longer requires custom handling for ktrsyscall() and
linux_ktrsyscall() has been removed as a result.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4823
intended behaviour in its man page. Simplify tty_drain() to match.
Don't call ttydevsw methods in tty_flush() if the device is gone
since we now sometimes call it then.
The flushing was supposed to be implemented by passing the FNONBLOCK
flag to VOP_CLOSE() for revoke(). The tty driver is one of the few
that can block in close and was one of the fewer that knew about this.
This almost worked in FreeBSD-1 and similarly in Net/2. These
versions only almost worked because there was and is considerable
confusion between IO_NDELAY and FNONBLOCK (aka O_NONBLOCK). IO_NDELAY
is only valid for VOP_READ() and VOP_WRITE(). For other VOPs it has
the same value as O_SHLOCK. But since vfs_subr.c and tty.c
consistently used the wrong flag and the O_SHLOCK flag is rarely set,
this mostly worked. It also gave the feature than applications could
get the non-blocking close by abusing O_SHLOCK.
This was first broken then fixed in 1995. I changed only the tty
driver to use FNONBLOCK, as a hack to get non-blocking via the normal
flag FNONBLOCK for last closes. I didn't know about revoke()'s use
of IO_NDELAY or change it to be consistent, so revoke() was broken.
Then I changed revoke() to match.
This was next broken in 1997 then fixed in 1998. Importing Lite2 made
the flags inconsistent again by undoing the fix only in vfs_subr.c.
This was next broken in 2008 by replacing everything in tty.c and not
checking any flags in last close. Other bugs in draining limited the
resulting unbounded waits to drain in some cases.
It is now possible to fix this better using the new FREVOKE flag.
Just restore flushing for revoke() for now. Don't restore or undo any
hacks for ordinary last closes yet. But remove dead code in the
1-second relative timeout (r272789). This did extra work to extend
the buggy draining for revoke() for as long as possible. The 1-second
timeout made this not very long by usually flushing after 1 second.
Submitted by: bde
MFC after: 2 weeks
by application closing its stdin (i.e. STDIN_FILENO) prior to
calling readpassphrase WITHOUT setting RPP_STDIN. What happens
then is that the readpassphrase would open /dev/tty, and since
file descriptors are reused, the call would return first unused
fd, which is 0 which is also STDIN_FILENO. Then due to the usage
of "input != STDIN_FILENO" in the code to do its logic, that
would result in noecho flags not set on that file descriptor,
which was original issue I've been trying to fix.
In addition to that, the readpassphrase() would leak file
descriptor on its way out, so fix that one as well.
This problem can be tested with:
$ ssh-add - < /tmp/myprivate.key
The password will not be hidden as it should and ktrace will
show:
53326 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
53326 ssh-add NAMI "/dev/tty"
53326 ssh-add RET open 0
53326 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd5e0)
53326 ssh-add RET sigprocmask 0
53326 ssh-add CALL sigaction(SIGALRM,0x7fffffffd630,0x7fffffffd610)
Instead of:
57690 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
57690 ssh-add NAMI "/dev/tty"
57690 ssh-add RET open 4
57690 ssh-add CALL ioctl(0x4,TIOCGETA,0x7fffffffd860)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL ioctl(0x4,TIOCSETAF,0x7fffffffd680)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd620)
57690 ssh-add RET sigprocmask 0
57690 ssh-add CALL sigaction(SIGALRM,0x7fffffffd670,0x7fffffffd650)
For the case when the key is read from the file.
Technically this can also be workaround'ed at the application side
by not closing the STDIN_FILENO in the first place, but readpassphrase(3)
doesn't need to make any assumptions about that. Plus the file descriptor
leak confirms that this is an oversight, rather than a deliberate behaviour.
MFC after: 1 week
This bug could be reproduced easily by calling sem_open() with O_CREAT |
O_EXCL on a semaphore that is already open in the process. The struct
sem_nameinfo would be freed while still in sem_list and later calls to
sem_open() or sem_close() could access freed memory.
PR: 206396
MFC after: 5 days
All gmon want's is a region of memory without the overhead of malloc().
Just mapping some pages with mmap is an easy way to accomplish this.
Approved by: jhb, cem, emaste
Obtained from: CheriBSD (bf33e1e70b368ababde74aa3ac70d108c8a52c69)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D5005
The PSEUDO* macros should not declare <syscall>, only _<syscall> and
__sys_<syscall>. This was causing the interposing C wrappers to be
ignored due to link order.
Reviewed by: kib
Obtained from: CheriBSD (4e8e13c90fc6a80e1520de44a6864cfd78b3b56d)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D4097
First, the authfd API now uses a direct file descriptor for the control
socket instead of a more abstract AuthenticationConnection structure.
Second, the functions now consistently return an error value.
Reviewed by: bdrewery
Prior to this patch, unless SSL_CA_CERT_FILE is set in the environment,
libfetch will set the CA file to "/usr/local/etc/cert.pem" if it exists,
and to "/etc/ssl/cert.pem" otherwise. This has the consequence of
masking SSL_CA_CERT_PATH, because OpenSSL will ignore the CA path if a CA
file is set but fails to load (see X509_STORE_load_locations()).
While here, fall back to OpenSSL defaults if neither SSL_CA_CERT_FILE nor
SSL_CA_CERT_PATH are set in the environment, and if neither of the
libfetch default CA files exists.
PR: 193871
Submitted by: John W. O'Brien <john@saltant.com>
Approved by: des
MFC after: 1 week