A T6 adapter contains two crypto engines on separate channels. This
commit distributes sessions between the two engines. Previously, only
the first engine was used.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24347
There are several reports of "hdac0: Command timeout on address 2"
messages emitted during playback on a variety of contemporary machines.
Show the command that timed out in case it might provide a clue in
finding the cause.
PR: 229190
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The comment previously stated the delay must be at least 250us but that
was insufficient and so should be doubled, but the delay was actually
1000. The HDA spec actually says the delay must be 521 us (25 frames)
so update the comment to match.
Recognize new micro-architecture in hwpmc_intel driver. Based on Intel
document 325462-071US. Tested with tools/test/hwpmc/pmctest.py
on Atom E3930 SoC.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D24310
When using SACK it can happen there are multiple option headers.
Don't drop these packets, but instead limit the amount of inlining
to the maximum supported.
MFC after: 1 week
Sponsored by: Mellanox Technologies
This includes 14 bytes of ethernet header and 2 bytes of VLAN header.
This allows for making assumptions about the inline size limit
in the fast transmit path later on.
Use a signed integer variable to catch underflow.
MFC after: 1 week
Sponsored by: Mellanox Technologies
The reporter is developing a frame buffer driver for hardware using
3 bytes per pixel, but a stride that's a multiple of 256. Previously
this resulted in writing beyond the end of each stride. On the last
row this attempted to write past the end of the frame buffer, triggering
the assertion in vt_fb_mem_wr1().
PR: 243533
MFC after: 2 weeks
Submitted by: Thomas Skibo
This is mostly indentation whitespace, and reflowing a few multiline
comments. This gets a bunch of minor stuff out of the way so that the diffs
for style don't clutter up the diffs for some upcoming functional changes.
Submitted by: Thomas Skibo
Differential Revision: https://reviews.freebsd.org/D24226
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
This allows clean handoff from BIOS implementing some asynchronous I/O to
the OS AHCI driver. During attach driver declares OS ownership request
and waits from 25ms to 2s for BIOS to complete operation and release the
hardware.
MFC after: 2 weeks
JMB582 has 2 6Gbps SATA ports and PCIe 3.0 x1.
JMB585 has 5 6Gbps SATA ports and PCIe 3.0 x2.
Both chips support AHCI v1.31, Port Multiplier with FBS and 8 MSI vectors.
MFC after: 2 weeks
device. This requires some structural refactoring inside the driver, mostly
about converting existing audio channel structures into arrays.
The main audio mixer is provided by the first PCM instance.
The non-first audio instances may only have a software mixer for PCM playback.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
key is pressed at the same time as a regular key, that means key with
modifier is output. Some automated USB keyboards like Yubikeys need this.
This fixes a regression issue after r357861.
Reported by: Adam McDougall <mcdouga9@egr.msu.edu>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
Incompatibility between i386 and amd64 evdev ABIs was caused by presence of
'struct timeval' in evdev protocol. Replace it with 'struct timeval32' for
32 bit binaries.
Big-endian platforms may require additional work due to bitstr_t (array of
unsigned longs) usage in ioctl interface.
MFC after: 2 weeks
If hdaa is used in polling mode, it logs each change to the poll
interval under bootverbose, which makes it unusable (slow). These
messages are arguably useless or are a debugging leftovers at best.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
- make sure volume controls are correctly mapped to "pcm" and "rec" depending
on how they deliver audio to the USB host.
- make sure there are no duplicate record selections.
- remove internal only mixer class type.
- don't add software volume controls for recording only.
- some minor mixer code cleanup.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This change fixes a couple of issues with OPAL IPMI driver and
implements a mechanism to detect timeouts and discard old messages left
in receive queue, to avoid old messages from being confused with the
reply of new ones.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D24185
Reverts r293369. The macro was orginally correct, since our SMBus
framework, unlike i2c, already requires addresses to be 8-bit, LSB-cleared.
MFC after: 3 days
Sponsored by: Juniper Networks, Inc
Previously they included sys/dev/cx/machdep.h, but the cx driver was
retired in r359178. These drivers haven't had real development for
a decade or more so there's no real benefit in sharing this file; just
copy it to the ce and cp subdirs.
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
This reduces the lines bouncing around between the driver rx ithread and
the netmap rxsync thread. There is no net change in the size of the
struct (it continues to waste a lot of space).
This kind of split was originally proposed in D17869 by Marc De La
Gueronniere @ Verisign, Inc.
MFC after: 1 week
Sponsored by: Chelsio Communications
