Commit Graph

282 Commits

Author SHA1 Message Date
Stefan Eßer
56ecc3824a Mention amd driver in comment regarding PCI drivers. 1996-12-21 02:09:04 +00:00
Stefan Eßer
f8fc022510 Add driver for AMD 53c974 SCSI (Tekram DC390/390T).
Remove MAX_LUN=2 option for NCR driver: FAILSAFE does
no longer imply MAX_LUN=1.
1996-12-18 01:30:19 +00:00
Stefan Eßer
b88a895923 Remove "options MAXLUN=2" since the ncr driver will probe for 8 LUNs
now anyway, even if compiled with FAILSAFE defined.
1996-12-15 16:31:18 +00:00
Jordan K. Hubbard
0b3870cb60 Close PR#2198:
I've added an installation from optical disk drive facility.
	This enables FreeBSD to be installed from an optical disk, which
	may be formatted in "super floppy" style or sliced into MSDOS-FS
	and UFS partitions.

	Note:  ncr.c should be reviewed by Stefan Esser <se@freebsd.org>
	and cd.c by Joerg Wunsch <joerg@freebsd.org> before bringing this
	into 2.2.

Submitted-By: Shunsuke Akiyama <akiyama@kme.mei.co.jp>
1996-12-13 07:55:14 +00:00
Justin T. Gibbs
11b5ea7239 Since there have been so many reports of the Memory Mapped I/O to the
aic7xxx cards failing on certain motherboards, reverse the logic used to
control this feature.  AHC_FORCE_PIO is replaced with AHC_ALLOW_MEMIO.
GENERIC no longer needs to specify the AHC_FORCE_PIO option since this is
the default.
1996-11-16 01:09:20 +00:00
Justin T. Gibbs
1affda38c1 Add two new aic7xxx driver options:
AHC_FORCE_PIO - This forces the driver to use PIO even on systems that
	say they have memory mapped the controller's registers.  This
	seems to fix Ken Lam's problems.  I've also placed this option
	in the GENERIC kernel file so that we are guaranteed to install
	even on these flakey machines.

AHC_SHARE_SCBS - This option attempts to share the external SCB SRAM on
	the 398X controllers allowing a totoll of 255 non-paged SCBs.
	This doesn't work quite yet, so this option is mostly here to
	help 398X owners to experiment and give me feedback until this
	works properly.
1996-10-28 06:05:58 +00:00
Poul-Henning Kamp
96fc6efbe3 Make userconfig two (default: on) options:
USERCONFIG to enable
	VISUAL_USERCONFIG to get the gui stuff too.
Requested by: pst
1996-09-11 19:53:45 +00:00
Wolfram Schneider
8830dd31e3 Add hints to the file ./LINT and the handbook. 1996-08-27 16:25:53 +00:00
Jordan K. Hubbard
0375cce8bc Merge. 1996-07-11 11:18:45 +00:00
Jordan K. Hubbard
9f5c1d518e Clean out some historical cruft. 1996-07-10 03:35:59 +00:00
Joerg Wunsch
c683ac7c95 Enable ktrace by default, accompanied by a small reminder about the
implications (4 KB bloat, slight slowdown of syscalls).

Reviewed by:	freebsd-hackers
1996-06-30 09:39:29 +00:00
Joerg Wunsch
9306343284 Explain the options for the `od' driver. 1996-06-16 20:04:47 +00:00
Nate Williams
92d38a1399 Added commented out PCCARD entries to GENERIC, also document and add
entries in LINT.
1996-05-13 04:29:14 +00:00
Bruce Evans
2c703b3e86 Only disable sio3 by default. 1996-05-01 03:26:58 +00:00
Jordan K. Hubbard
9773398d95 Add ATAPI_STATIC so that the ATAPI cdroms work correctly again
under -current.
Submitted-By: Serge Vakulenko <vak@cronyx.ru>
1996-04-29 20:03:41 +00:00
Nate Williams
e597b4972e - add apm to the GENERIC kernel (disabled by default), and add some comments
regarding apm to LINT
- Disabled the statistics clock on machines which have an APM BIOS and
  have the options "APM_BROKEN_STATCLOCK" enabled (which is default
  in GENERIC now)
- move around some of the code in clock.c dealing with the rtc to make
  it more obvios the effects of disabling the statistics clock

Reviewed by:	bde
1996-04-22 19:40:28 +00:00
Nate Williams
6bb76283e0 Added a disabled psm0 (PS/2) mouse device, using the new 'disable'
keyword.
1996-04-18 04:02:30 +00:00
Jordan K. Hubbard
7506b46e07 Disable sio3 in GENERIC - it messes with ATI cards. 1996-04-10 23:03:36 +00:00
Jordan K. Hubbard
dbb315cb8e Gag! Somebody removed the bus mouse from GENERIC for reasons unknown.
That certainly explains why I noticed it suddenly missing from the
2.2 SNAPSHOT! :-)
1996-04-09 09:00:41 +00:00
Jordan K. Hubbard
51fa90c524 Add vx0 device to GENERIC. Yes, I know that this bloats GENERIC, but
what can we do?
1996-03-20 10:42:56 +00:00
Jordan K. Hubbard
a732b754b4 Add fe0 to the LINT and GENERIC files (hmmm - looks like my rcvs setup't
isn't supplying all the proper header info here!  Last commit of fe0
entry should have had the following Submitted by line also).
Submitted-by: Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp>
1996-03-17 08:39:51 +00:00
Jordan K. Hubbard
25cf9d99fb Add FAILSAFE option for selecting extra conservativeness when such
is more practical (like during installation).  Correspondingly, set the
option by default in GENERIC now.
1996-03-11 18:47:39 +00:00
Nate Williams
4e5935064c Added a comment above the npx0 device line
# Mandatory, don't remove
1996-01-20 06:14:33 +00:00
Justin T. Gibbs
a8ce2e68d7 Add comment about only needing on of either ahc, ncr, or ahb type
controllers to handle any number of devices.
Remove unnecessary extra units for these controllers.
1996-01-07 19:19:38 +00:00
Jordan K. Hubbard
56c7a48c93 Make a couple of options that hurt when they're removed more
carefully noted.
1995-12-29 02:04:20 +00:00
David Greenman
17acc2b264 Added device fxp0 (device driver for Intel EtherExpress Pro/100). 1995-12-24 08:13:23 +00:00
David Greenman
7059cdf2d3 Added I686_CPU. 1995-12-24 08:11:46 +00:00
Peter Wemm
b1529bda75 GENERIC/LINT: Remove redundant quoting on some option lines.
LINT: add a couple of new/missing/undocumented options
files.i386: add linux code so that you can compile a kernel with static
linux emulation ("options LINUX")
i386/*: use #if defined(COMPAT_LINUX) || defined(LINUX) to enable static
support of linux emulation (just like "IBCS2" makes ibcs2 static)

The main thing this is going to make obvious, is that the LINUX code
(when compiled from LINT) has a lot of warnings, some of which dont look
too pleasant..
1995-12-14 14:35:36 +00:00
Justin T. Gibbs
a1d01daf77 Have bt0 entry specify "bt_isa_intr" for its vector. This one entry will
allow one EISA/ISA/PCI/VL Buslogic controller to be probed.  The driver
is almost fully dynamic.  It just needs some kdc work and for the SCSI code
to stop passing unit numbers up in the scsi_xfer struct.
1995-12-12 08:46:40 +00:00
Bruce Evans
174f8afaa3 Added pcvt option FAT_CURSOR.
Fixed comment about PCVT_VERSION=210.

Fixed tabs and trailing blanks.
1995-12-10 22:14:15 +00:00
Nate Williams
e9aaac99f2 GENERIC - Add a commented out line for adding support for IBM ThinkPad
keyboards

LINT - Add SCANSET=2 support to the LINT kernel and comments reflecting it's
       purpose.
1995-11-29 20:07:49 +00:00
Justin T. Gibbs
e56e703606 Change ahb device line to eisaconf syntax. 1995-11-09 22:47:05 +00:00
Justin T. Gibbs
eeb706c070 Add eisa0 and remove ISA configuration line for ahc0. 1995-11-05 17:02:54 +00:00
Joerg Wunsch
49bdb5b8e7 Include the "od" driver. 1995-10-31 17:00:03 +00:00
Jordan K. Hubbard
9720b0841f Stable matcd port to 0x230, as per request by Bruce and Frank.
Submitted by: Frank Durda IV <uhclem@fw.ast.com>
1995-10-25 16:43:01 +00:00
Jordan K. Hubbard
6788ce49a0 Bring in Serge Vakulenko's IDE CDROM (ATAPI) driver. A number of
people have now indicated to me that it's working more than well
enough to bring into -current.
Submitted by:	Serge Vakulenko <vak@cronyx.ru>
1995-08-18 11:26:35 +00:00
Rodney W. Grimes
d3628763db Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00
David Greenman
a401ebbe32 Changed swap partition handling/allocation so that it doesn't
require specific partitions be mentioned in the kernel config
file ("swap on foo" is now obsolete).

From Poul-Henning:

The visible effect is this:

As default, unless
        options "NSWAPDEV=23"
is in your config, you will have four swap-devices.
You can swapon(2) any block device you feel like, it doesn't have
to be in the kernel config.

There is a performance/resource win available by getting the NSWAPDEV right
(but only if you have just one swap-device ??), but using that as default
would be too restrictive.

The invisible effect is that:

Swap-handling disappears from the $arch part of the kernel.
It gets a lot simpler (-145 lines) and cleaner.

Reviewed by:	John Dyson, David Greenman
Submitted by:	Poul-Henning Kamp, with minor changes by me.
1995-05-14 03:00:10 +00:00
Poul-Henning Kamp
807afe4fa5 A missing 'and', probably my fault.
Submitted by:	Ed Hudson <elh@p5.spnet.com>
1995-05-02 04:40:06 +00:00
Poul-Henning Kamp
d3f4d460f8 Added "bio" to matcd. 1995-04-24 05:33:59 +00:00
Poul-Henning Kamp
804e33a872 Add wd2 and wd3 as swap-devices too. 1995-04-20 06:05:17 +00:00
Poul-Henning Kamp
8d89e37c73 I got that wrong,
lnc0	@ 0x280
	lnc1	@ 0x300

moved le0 into sorted sequence.
1995-04-10 19:13:51 +00:00
Poul-Henning Kamp
1f9e6f1901 lnc0 is @ 0x300
lnc1 is @ 0x280
1995-04-10 19:12:29 +00:00
Poul-Henning Kamp
63373752ea Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
Poul-Henning Kamp
12cfa43650 Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
card.  This is the braindamaged card with the 80186 CPU on it.  It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...

Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
Rodney W. Grimes
ad0c439a34 Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
Rodney W. Grimes
f8e028be26 Add Intel EtherExpress16 (ix0) driver.
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
Atsushi Murai
9cfb8f7ee9 Adding tunnel pseudo-device for Network Installation with User process PPP.
Reviewed by:	amruai@spec.co.jp
1995-03-12 12:10:35 +00:00
Joerg Wunsch
68cfe626f7 pcvt is still using the XSERVER option; document this. 1995-03-05 22:23:35 +00:00
Jordan K. Hubbard
05e1d9d455 Changes to incorporate the Matsushita CDROM driver (otherwise known as
the "Sound blaster CDROM").
Submitted by:	Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
Joerg Wunsch
c851c2f0ea Include three lines about the pcvt console driver, so we don't ever need
a different config file for it.
1995-02-15 20:38:36 +00:00
Jordan K. Hubbard
11af896263 Add PPP to the generic kernel. Now that Poul has made us all this space,
maybe I can get us back into the slip/ppp game without having to tell users
to reconfigure their kernels all the time! :)
1995-02-09 11:21:07 +00:00
Jordan K. Hubbard
f1780a6c25 Add soundblaster CD to generic kernel. Hope this doesn't run us out
of space!
1995-01-28 05:01:43 +00:00
Poul-Henning Kamp
e05407d84b New and far better NCR5380/NCR53400 scsi-driver.
Handles at least Trantor T130 and ProAudioSpectrum adapters.
The pas driver has consequently been removed.
This driver can be configured without without interrupts.

Manpage to follow when PAS16 has been edited in.

Reviewed by:	phk
Submitted by:	Serge Vakulenko, <vak@cronyx.ru>
1995-01-27 07:49:19 +00:00
Andrey A. Chernov
87fcda4634 Remove FAT_CURSOR, it is already non-existent during several
last syscons versions
1995-01-26 05:04:37 +00:00
Paul Richards
94187a78bf is to lnc changes 1995-01-24 20:38:39 +00:00
Jordan K. Hubbard
9949564470 Remove bogus scd0 driver - I should have looked at LINT first, anyway. 1995-01-14 10:48:56 +00:00
Jordan K. Hubbard
0dd1eea105 Put UCONSOLE back - I was wrong, it's still used in one last place.
Submitted by:	ollivier
1995-01-14 02:39:22 +00:00
Justin T. Gibbs
451ab98ff3 Add in aic7770.c (EISA/VL Adaptors) and aic7870.c (PCI adaptor) dependancies
for the ahc driver.
1995-01-13 02:23:27 +00:00
Jordan K. Hubbard
09c42f85eb 1. Remove UCONSOLE. This appears to be well and truly dead (unless it's
hiding someplace in /sys I can't find).
2. Remove NCONS.  Soren's latest changes make it a no-op.
1995-01-12 15:37:16 +00:00
Jordan K. Hubbard
76fe9b2793 Add a 'vn' to GENERIC 1994-12-18 12:01:40 +00:00
Poul-Henning Kamp
784cf072d8 Remove sd1-sd3 & st1, now that we can autoallocate them.
fix the vn driver in LINT.  It autoallocates too.

Reviewed by:	phk
Submitted by:	rgrimes
1994-12-16 06:04:16 +00:00
Jordan K. Hubbard
26b39132e4 Put ie0 above ep0. Otherwise, the ie0 probe clobbers it.
Submitted by:	gibbs
1994-11-18 19:10:25 +00:00
Justin T. Gibbs
cbb8b164f0 New device-driver entries for the aic7770 driver. These use new features
of config so YOU MUST RECOMPILE CONFIG.  Modifying config was the cleanest
solution to integrating this driver into the tree which will become more
obvious in the next commit.
1994-11-17 20:20:54 +00:00
Justin T. Gibbs
e424e8bfac Add ep0 line to kernel config files. 1994-11-13 10:17:07 +00:00
Nate Williams
412ac969ed Add Matt Thomas' le0 DEPCA driver to the GENERIC kernel. This works
but I can't test to see if it walks on other ethernet drivers.  Can the
install folks add this driver to the install script?
1994-11-13 09:42:07 +00:00
David Greenman
ef53d2f8b6 Nuked ed2 - it was added for the common 16bit card case where the
irq is 10. This is auto-sensed/configured now in the 'ed' driver.
1994-11-13 07:20:03 +00:00
Jordan K. Hubbard
5231231d03 Add back ed2. Harrumph.. 1994-11-12 20:27:24 +00:00
Jordan K. Hubbard
794a798905 ed2 was actually an impossible entry to reach! 1994-11-12 06:12:01 +00:00
David Greenman
e50e132aa8 Added 'de' ethernet driver. 1994-11-11 05:48:49 +00:00
Jordan K. Hubbard
49445644f1 Enable floppy-tape support. 1994-11-10 23:46:31 +00:00
Jordan K. Hubbard
ada9d061d4 Add back ze0 driver; somebody took it out of _both_ LINT and GENERIC,
kinda hosing the laptop folks.
1994-11-08 07:39:28 +00:00
Jordan K. Hubbard
2405ced306 Argh! Missing quotes. 1994-11-05 07:41:08 +00:00
Jordan K. Hubbard
4525c93ebf We need CD9660 and MSDOS filesystems built-in if the floppy is to have
a hope of getting at these types of filesystems without dragging all
the LKM stuff in.
1994-11-05 07:38:50 +00:00
Jordan K. Hubbard
b851eb1523 Eliminate USERCONFIG. This option is now standard. 1994-11-03 15:51:38 +00:00
Gary Palmer
97555463a4 Cosmetic changes in comment at start (it's no longer a GENERICAH config
file!)
1994-11-03 01:46:59 +00:00
Jordan K. Hubbard
cb72513713 Enable USERCONFIG and document it in LINT. 1994-10-26 19:20:27 +00:00
Søren Schmidt
3c43212ad8 Added sea0 - Seagate driver lines to config 1994-10-24 22:18:12 +00:00
Poul-Henning Kamp
b4e5146fc5 NFS-diskless works. Look in sys/i386/boot/netboot for some of the
explanation.  More doc needed, but not hard to do, if you want to.

A big hand to Martin Renters for the netboot program !

Anybody want to compete on who can "make world" in the shortest
amount of time ?  I have 127 i486DX2/66 and 5 P60's I can use
now.  And 3 times 66 Gb file servers to support it... :->

Anyway, NFS will be standard in the GENERIC kernel now, so that
people can use the bin-tarball to set up shop.
1994-10-22 17:50:17 +00:00
Poul-Henning Kamp
c47b6376fd According to a quick reading of sources, one experiment and Bruce's word:
aha, ahb and bt all on "irq ?" now.
1994-10-20 00:53:30 +00:00
Poul-Henning Kamp
12396a6a16 Bruce told me to: Make uha0 use irq ? 1994-10-20 00:19:37 +00:00
Poul-Henning Kamp
677060b407 GENERIC is our new all singing and dancing kernel. Please report ASAP if
there is anything GENERICAH or GENERICBT can, which this one cannot.

MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00