120463 Commits

Author SHA1 Message Date
Warner Losh
2ced565834 Tag the current round of deprecated drivers.
Differential Revision: https://reviews.freebsd.org/D13818
2018-01-29 00:14:46 +00:00
Warner Losh
7faed6e3e9 Create deprecation management functions.
gone_in(majar, msg);	If we're running in FreeBSD major, tell
			the user this code may be deleted soon.
			If we're running in FreeBSD major - 1,
			the the user is deprecated and will
			be gone in major.
			Otherwise say nothing.

gone_in_dev(dev, major, msg) Just like gone_in, except use device_printf.

New tunable / sysctl debug.oboslete_panic: 0 - don't panic,
	1 - panic in major or newer , 2 - panic in major - 1 or newer
	default: 0

if NO_OBSOLETE_CODE is defined, then both of these turn into compile
time errors when building for major. Add options NO_OBSOLETE_CODE to
kernel build system.

This lets us tag code that's going away so users know it will be gone,
as well as automatically manage things.

Differential Review: https://reviews.freebsd.org/D13818
2018-01-29 00:14:39 +00:00
Warner Losh
29077eb456 Use atomic load and stores to ensure that the compiler doesn't
optimize away these loops. Change boolean to int to match what atomic
API supplies. Remove wmb() since the atomic_store_rel() on status.done
ensure the prior writes to status. It also fixes the fact that there
wasn't a rmb() before reading done. This should also be more efficient
since wmb() is fairly heavy weight.

Sponsored by: Netflix
Reviewed by: kib@, jim harris
Differential Revision: https://reviews.freebsd.org/D14053
2018-01-29 00:00:52 +00:00
Warner Losh
8cc3cfa86d Out of an abundance of caution, NUL out the first byte in the PNP
info.
2018-01-28 23:58:22 +00:00
Nathan Whitehorn
21776ff850 Remove some unused AIM register declarations that existed to support some
CPUs we have never run on. As a side-effect, removes some #ifdef AIM/#else.
2018-01-28 21:30:57 +00:00
Justin Hibbits
0a3ef103a3 Start building modules for QORIQ64
There's no reason not to build modules for 64-bit QorIQ devices.  This
config has evolved to be analogous to the AIM GENERIC64 kernel, so will grow
to match it in more ways as well.
2018-01-28 20:35:48 +00:00
Justin Hibbits
a72b951348 Consolidate trap instruction checks to a single function
Summary:
Rather than duplicating the checks for programmatic traps all over the code, put
it all in one function.  This helps to remove some of the #ifdefs between AIM
and Book-E.

Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D14082
2018-01-28 19:18:40 +00:00
Alexander Motin
a5232cc4fb Assume Always Running APIC Timer for AMD CPU families >= 0x12.
Fallback to HPET may cause locks congestions on many-core systems.
This change replicates Linux behavior.

MFC after:	1 month
2018-01-28 18:18:03 +00:00
Michal Meloun
2b4c1a7ffc Remove #endif forgotten in r328510.
Pointy hat: mmel
2018-01-28 15:33:32 +00:00
Michal Meloun
6403138990 diff --git a/sys/dev/extres/clk/clk.c b/sys/dev/extres/clk/clk.c
index c6a1f466ceb..c3708a0ce27 100644
--- a/sys/dev/extres/clk/clk.c
+++ b/sys/dev/extres/clk/clk.c
@@ -642,10 +642,11 @@ clknode_adjust_parent(struct clknode *clknode, int idx)
 	if (clknode->parent_cnt == 0)
 		return;
 	if ((idx == CLKNODE_IDX_NONE) || (idx >= clknode->parent_cnt))
-		panic("Invalid clock parent index\n");
+		panic("%s: Invalid parent index %d for clock %s",
+		    __func__, idx, clknode->name);

 	if (clknode->parents[idx] == NULL)
-		panic("%s: Attempt to set invalid parent %d for clock %s",
+		panic("%s: Invalid parent index %d for clock %s",
 		    __func__, idx, clknode->name);

 	/* Remove me from old children list. */
@@ -674,8 +675,8 @@ clknode_init_parent_idx(struct clknode *clknode, int idx)
 	if ((idx == CLKNODE_IDX_NONE) ||
 	    (idx >= clknode->parent_cnt) ||
 	    (clknode->parent_names[idx] == NULL))
-		panic("%s: Invalid clock parent index: %d\n", __func__, idx);
-
+		panic("%s: Invalid parent index %d for clock %s",
+		    __func__, idx, clknode->name);
 	clknode->parent_idx = idx;
 }
2018-01-28 15:20:45 +00:00
Michal Meloun
89b090f1e6 Fix handling of I-cache sync operations
- pmap_enter_object() can be used for mapping of executable pages, so it's
  necessary to handle I-cache synchronization within it.

- Fix race in I-cache synchronization in pmap_enter(). The current code firstly
  maps given page to target VA and then do I-cache sync on it. This causes
  race, because this mapping become visible to other threads, before I-cache
  is synced.
  Do sync I-cache firstly (by using DMAP VA) and then map it to target VA.

- ARM64 ARM permits implementation of aliased (AIVIVT, VIPT) I-cache, but we
  can use different that final VA for flushing it. So we should use full
  I-cache flush on affected platforms. For now, and as temporary solution,
  use full flush always.
2018-01-28 15:02:49 +00:00
Warner Losh
55cf33a584 Add the DF_SUSPENDED flag to flags that are printed. 2018-01-28 05:13:17 +00:00
Warner Losh
eef186f8f5 Avoid using \$. It's an unknown escape sequence. Some awks warn about
that. Instead, simply remove the sequence entirely because we never
commit the generated files.
2018-01-28 05:13:08 +00:00
Kyle Evans
1a4529b5e5 MFV r328490: Update libfdt to github:f1879e1
Pulls in a patch, now upstreamed, from nwhitehorn to add limited read-only
support for older (v2 and v3) FDT blobs.

MFC after:	1 week
2018-01-27 21:25:45 +00:00
Jason A. Harmening
283f8a5c33 Remove system makefile path directives from env passed to PORTS_MODULES step
Previously, MAKESYSPATH as well as '-m' directives in MAKEFLAGS would cause
any port rebuilt during the PORTS_MODULES stage to consume system makefiles
from $(SRCROOT)/share/mk instead of those installed under /usr/share/mk.
For kernel modules that need to build against an updated src tree this
makes sense; less so for <bsd.port.mk> or  any userspace library or utility
the port may also happen to install.

Before 11.0, this probably didn't matter much in practice.  But the addition
of src.libnames.mk under $(SRCROOT)/share/mk in 11.0 breaks any consumer of
bsd.prog.mk and DPADD/LDADD during PORTS_MODULES.

Address the build breakage by removing MAKESYSPATH and any occurrence of
'-m' from MAKEFLAGS in the environment created for the port build.
Instead set SYSDIR so that any kmod built by the port will still consume
conf/kmod.mk from the updated src tree, assuming it uses <bsd.kmod.mk>

Reviewed by:	bdrewery
MFC after:	2 weeks
Differential Revision: 	https://reviews.freebsd.org/D13053
2018-01-27 20:13:36 +00:00
Pedro F. Giffuni
040fb18b60 Revert r328479:
{ext2|ufs}_readdir: Set limit on valid ncookies values.

We aren't allowed to set resid like this.

Pointed out by:	kib, imp
2018-01-27 16:34:00 +00:00
Pedro F. Giffuni
ee233ab975 {ext2|ufs}_readdir: Set limit on valid ncookies values.
Sanitize the values that will be assigned to ncookies so that we ensure
they are sane and we can handle them.

Let ncookies signed as it was before r328346. The valid range is such
that unsigned values are not required and we are not able to avoid at
least one cast anyways.

Hinted by:	bde
2018-01-27 15:33:52 +00:00
Michael Tuexen
cf6339882e Add constant for the PAD chunk as defined in RFC 4820.
This will be used by traceroute and traceroute6 soon.

MFC after:	1 week
2018-01-27 13:46:55 +00:00
Michael Tuexen
07e75d0a37 Update references in comments, since the IDs have become an RFC long
time ago. Also cleanup whitespaces. No functional change.

MFC after:	1 week
2018-01-27 13:43:03 +00:00
Mariusz Zaborski
1acf348551 Add SPDX tags for nv(9).
MFC after:	2 weeks
2018-01-27 12:58:21 +00:00
Mariusz Zaborski
0fc4adbe06 Don't truncate name of glabel.
If it's to long just report that.

Reviewed by:	trasz@
Differential Revision:	https://reviews.freebsd.org/D13746
2018-01-27 12:28:52 +00:00
Konstantin Belousov
c8f9c1f3d9 Use PCID to optimize PTI.
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.

I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.

Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address.  Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.

On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.

I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.

Reviewed by:	markj (previous version)
Tested by:	pho
Discussed with:	alc (some aspects)
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
Differential revision:	https://reviews.freebsd.org/D13985
2018-01-27 11:49:37 +00:00
Konstantin Belousov
e65c8c1afb Fix native_lapic_ipi_alloc().
When PTI is enabled, empty IDT slots point to rsvd_pti.

Reported by:	Dexuan-BSD Cui <dexuan.bsd@gmail.com>
Sponsored by:	The FreeBSD Foundation
MFC after:	5 days
2018-01-27 11:33:21 +00:00
Michal Meloun
a36b6ec0f9 Implement mitigation for Spectre version 2 attacks on ARMv7.
Similarly as we already do for arm64, for mitigation is necessary to
flush branch predictor when we:
- do task switch
- receive prefetch abort on non-userspace address

The user can disable this mitigation by setting 'machdep.disable_bp_hardening'
sysctl variable, or it can check actual system status by reading
'machdep.spectre_v2_safe'

The situation is complicated by fact that:
- for Cortex-A8, the BPIALL instruction is effectively NOP until the IBE bit
  in ACTLR is set.
- for Cortex-A15, the BPIALL is always NOP. The branch predictor can be
  only flushed by doing ICIALLU with special bit (Enable invalidates  of BTB)
  set in ACTLR.

Since access to the ACTLR register is locked to secure monitor/firmware on
most boards, they will also need update of firmware / U-boot.
In worst case, when secure monitor is on-chip ROM (e.g. PandaBoard),
the board is unfixable.

MFC after:	2 weeks
Reviewed by:	imp, emaste
Differential Revision:	https://reviews.freebsd.org/D13931
2018-01-27 11:19:41 +00:00
Michal Meloun
116a5567dd Fix pmap_fault().
- special fault handling for break-before-make mechanism should be also
  applied for instruction translation faults, not only for data translation
  faults.

- since arm64_address_translate_...() functions are not atomic,
  use these with disabled interrupts.
2018-01-27 09:49:47 +00:00
Conrad Meyer
9ea9c34ba5 ccp(4): Store IV in output buffer in GCM software fallback when requested
Apply r328361 to duplicate copy of ccr_gcm_soft in ccp(4).

Properly honor the lack of the CRD_F_IV_PRESENT flag in the GCM software
fallback case for encryption requests.
2018-01-27 07:41:31 +00:00
Scott Long
da2f5dfb35 Finish the incomplete move of CAM_PERIPH_PRINT().
Reported by:	kevans
2018-01-27 07:18:02 +00:00
Scott Long
15747cacb4 Move CAM_PERIPH_PRINT() to cam_periph.h 2018-01-26 23:56:07 +00:00
John Baldwin
5425750f03 Move per-operation data out of the csession structure.
Create a struct cryptop_data which contains state needed for a single
symmetric crypto operation and move that state out of the session. This
closes a race with the CRYPTO_F_DONE flag that can result in use after
free.

While here, remove the 'cse->error' member.  It was just a copy of
'crp->crp_etype' and cryptodev_op() and cryptodev_aead() checked both
'crp->crp_etype' and 'cse->error'.  Similarly, do not check for an
error from mtx_sleep() since it is not used with PCATCH or a timeout
so cannot fail with an error.

PR:		218597
Reviewed by:	kib
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D13928
2018-01-26 23:21:50 +00:00
Warner Losh
60b7691d56 Fix a sleepable malloc in ndastart. We shouldn't be sleeping
here. Return ENOMEM when we can't malloc a buffer for the DSM
TRIM. This should fix the WITNESS warnings similar to the following:

uma_zalloc_arg: zone "16" with the following non-sleepable locks held:
exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff800080c34d0) locked @ /usr/src/sys/cam/nvme/nvme_da.c:351

Reviewed by: scottl@
Sponsored by: Netflix
2018-01-26 23:14:46 +00:00
Alexander Motin
3986af1f65 Use bus_dmamem_alloc(9) KPI instead of contigmalloc(9).
I suppose it should make this code NUMA-aware with recent NUMA drop-in,
trying to allocate shared memory buffers from domain closer to NT-bridge.

MFC after:	2 weeks
2018-01-26 22:22:26 +00:00
Scott Long
074cc5f66d Fix a cut-and-paste error in a panic message 2018-01-26 18:42:28 +00:00
Kirk McKusick
4d93711d80 For many years the message "fsync: giving up on dirty" has occationally
appeared on UFS/FFS filesystems. In some cases it was promptly followed
by a panic of "softdep_deallocate_dependencies: dangling deps". This fix
should eliminate both of these occurences.

Submitted by: Andreas Longwitz <longwitz at incore.de>
Reviewed by:  kib
Tested by:    Peter Holm (pho)
PR:           225423
MFC after:    1 week
2018-01-26 18:17:11 +00:00
Ian Lepore
4dbbaf2021 Add support to the imx5/6 watchdog for the external reset signal. Also, if
the "power down" watchdog used by the ROM boot code is still active when the
regular watchdog is activated, turn off the power-down watchdog.

This adds support for the "fsl,ext-reset-output" FDT property.  When
present, that property indicates that a chip reset is accomplished by
asserting the WDOG1_B external signal, which is supposed to trigger some
external component such as a PMIC to ready the hardware for reset (for
example, adjusting voltages from idle to full-power levels), and assert the
POR signal to SoC when ready.  To guard against misconfiguation leading to a
non-rebootable system, the external reset signal is backstopped by code
that asserts a normal internal chip reset if nothing responds to the
external reset signal within one second.
2018-01-26 17:55:17 +00:00
Hans Petter Selasky
e23ae408c0 Decouple Linux files from the belonging character device right after open
in the LinuxKPI. This is done by calling finit() just before returning a magic
value of ENXIO in the "linux_dev_fdopen" function.

The Linux file structure should mimic the BSD file structure as much as
possible. This patch decouples the Linux file structure from the belonging
character device right after the "linux_dev_fdopen" function has returned.
This fixes an issue which allows a Linux file handle to exist after a
character device has been destroyed and removed from the directory index
of /dev. Only when the reference count of the BSD file handle reaches zero,
the Linux file handle is destroyed. This fixes use-after-free issues related
to accessing the Linux file structure after the character device has been
destroyed.

While at it add a missing NULL check for non-present file operation.
Calling a NULL pointer will result in a segmentation fault.

Reviewed by:	kib @
MFC after:	1 week
Sponsored by:	Mellanox Technologies
2018-01-26 10:49:02 +00:00
Wojciech Macek
919736d252 PPC: Add place for NULL chars in intrnames
In a corner case we could fall into OOB error.

Authored by:           Patryk Duda <pdk@semihalf.com>
Submitted by:          Wojciech Macek <wma@semihalf.com>
Obtained from:         Semihalf
Sponsored by:          IBM, QCM Technologies
2018-01-26 09:38:40 +00:00
Li-Wen Hsu
78b42ee37c Fix LINT build.
Approved by:	delphij
2018-01-26 06:21:24 +00:00
Kirk McKusick
dffce2150e Refactoring of reading and writing of the UFS/FFS superblock.
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.

No functional change intended.

Reviewed by: kib
2018-01-26 00:58:32 +00:00
Justin Hibbits
a99028fc70 Minimum changes for ctl to build on architectures with non-matching physical and
virtual address sizes

Summary:
Some architectures use physical addresses larger than virtual.  This is the
minimal changeset needed to get CAM/CTL to build on these targets.  No
functional changes.  More changes would likely be needed for this to be fully
functional on said platforms, but they can be made when needed.

Reviewed By:	mav, chuck
Differential Revision:	https://reviews.freebsd.org/D14041
2018-01-26 00:58:02 +00:00
Justin Hibbits
51bd6f9618 Minimal change to build linuxkpi on architectures with physical addresses larger
than virtual

Summary:
Some architectures have physical/bus addresses that are much larger
than virtual addresses.  This change just quiets a warning, as DMAP is not used
on those architectures, and on 64-bit platforms uintptr_t is the same size as
vm_paddr_t and void *.

Reviewed By:	hselasky
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D14043
2018-01-26 00:56:09 +00:00
Navdeep Parhar
ea3c5e5d04 cxgbe(4): Accept old names of a couple of tunables. 2018-01-26 00:45:40 +00:00
Navdeep Parhar
39e7cb038b cxgbe(4): Do not display harmless warning in non-debug builds.
MFC after:	3 days
Sponsored by:	Chelsio Communications
2018-01-26 00:03:14 +00:00
Conrad Meyer
b97b91b547 nfs: Remove NFSSOCKADDRALLOC, NFSSOCKADDRFREE macros
They were just thin wrappers over malloc(9) w/ M_ZERO and free(9).

Discussed with:	rmacklem, markj
Sponsored by:	Dell EMC Isilon
2018-01-25 22:38:39 +00:00
Conrad Meyer
222daa421f style: Remove remaining deprecated MALLOC/FREE macros
Mechanically replace uses of MALLOC/FREE with appropriate invocations of
malloc(9) / free(9) (a series of sed expressions).  Something like:

* MALLOC(a, b, ... -> a = malloc(...
* FREE( -> free(
* free((caddr_t) -> free(

No functional change.

For now, punt on modifying contrib ipfilter code, leaving a definition of
the macro in its KMALLOC().

Reported by:	jhb
Reviewed by:	cy, imp, markj, rmacklem
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D14035
2018-01-25 22:25:13 +00:00
Warner Losh
d85487b732 Add new opt_da.h for stand-alone build.
Sponsored by: Netflix
2018-01-25 21:48:07 +00:00
Warner Losh
d047fd281d Track Ref / DeRef and Hold / Unhold that da is doing to track down
leaks. We assume each source can be taken / dropped only once and
don't recurse. These are only enabled via DA_TRACK_REFS or
INVARIANTS. There appreas to be a reference leak under extreme load,
and these should help us colaberatively work it out. It also documents
better the reference / holding protocol better.

Reviewed by: ken@, scottl@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
2018-01-25 21:38:30 +00:00
Warner Losh
de64cba2c7 When devices are invalidated, there's some cases where ccbs for that
device still wind up in xpt_done after the path has been
invalidated. Since we don't always need sim or devq, add some guard
rails to only fail if we have to use them.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
2018-01-25 21:38:09 +00:00
Nathan Whitehorn
e649493c6d Avoid all SLB operations in trap handling if the process is not using a
software-managed SLB.
2018-01-25 18:10:33 +00:00
Nathan Whitehorn
3e1b393a51 Treat DSE exceptions like DSI exceptions when generating signinfo.
Both can generate SIGSEGV, but DSEs would have put the wrong address
into the siginfo structure when the signal was delivered.

MFC after:	1 week
2018-01-25 18:09:26 +00:00
Ian Lepore
5b810fe4a6 Fix return style in RD2. Remove bogus return value from a void function
in WR2 (I have no idea why that didn't result in a compile error).
2018-01-25 18:08:56 +00:00