* Illumos zfs issue #3035 [1] LZ4 compression support in ZFS.
LZ4 is a new high-speed BSD-licensed compression algorithm created
by Yann Collet that delivers very high compression and decompression
performance compared to lzjb (>50% faster on compression, >80% faster
on decompression and around 3x faster on compression of incompressible
data), while giving better compression ratio [1].
This version of LZ4 corresponds to upstream's [2] revision 85.
Please note that for obvious reasons this is not backward read
compatible. This means once a pool have LZ4 compressed data, these
data can no longer be read by older ZFS implementations.
Local changes:
- On-stack hash table disabled and using kernel slab allocator
instead, at this time. This requires larger kernel thread stack
for zio workers. This may change in the future should we adjusted
the zio workers' thread stack size.
- likely and unlikely will be undefined if they are already defined,
this is required for i386 XEN build.
- Removed De Bruijn sequence based __builtin_ctz family of builtins
in favor of the latter. Both GCC and clang supports these builtins.
- Changed the way the LZ4 code detects endianness.
- Manual pages modifications to mention the feature based on Illumos
counterpart.
- Boot loader changes to make it support LZ4 decompression.
[1] https://www.illumos.org/issues/3035
[2] http://code.google.com/p/lz4/source/list
Obtained from: Illumos (13921:9d721847e469)
Tested on: FreeBSD/amd64
MFC after: 1 month
A special gfs vnode corresponds to that object.
A regular zfs vnode must not be returned.
This should be upstreamed.
Reported by: pluknet
Submitted by: rmacklem
Tested by: pluknet
MFC after: 10 days
Now they are split into two pairs: page_hold/page_unhold for mappedread
and page_busy/page_unbusy for update_pages.
For mappedread we simply hold a page that is to be used as a source if it
is resident and valid (and not busy). This is sufficient since we are
only doing page -> user buffer copying. There is no page <-> backing
storage I/O involved.
update_pages is now better split to properly handle the putpages case
(page -> arc) and the regular write case (arc -> page).
For the latter we use complete protocol of marking an object with
paging-in-progress and marking a page with io_start (busy count).
Also, in this case we remove the write bit from all page mappings and
clear dirty bits of the pages, the former is needed to ensure that the
latter does the right thing.
Additionally we update a page if it is cached instead of just freeing it
as was done before. This needs to be verified.
A minor detail: ZFS-backed pages should always be either fully valid
or fully invalid. Assert this and use simpler API that does not deal
with sub-page blocks.
Reviewed by: kib
MFC after: 26 days
- there is no such flag in Solaris and derivatives
- the flag was added in an unrelated change
- the flag is not used
The proper way to allocate zeroed out memory is to use kmem_zalloc.
MFC after: 3 days
This should allow the kernel linker to easily detect a situation
when the module is present both in a kernel and in a preloaded file
(zfs.ko).
Reviewed by: jhb
MFC after: 5 days
It seems that old ZFS versions (v15) completely omit "vdev_children"
property when there is a single child.
Reported by: jase
Tested by: jase
MFC after: 1 week
the underlying zap_count() to return no errors. However, it is possible
that the pool reaches to such a state where zap_count would return error,
leading to panics when a pool is imported.
This commit changes the ddt_zap_count to return error returned from
zap_count and handle the error appropriately. With this change, it's now
possible to let zpool rollback damaged transaction groups and import the
pool.
Obtained from: ZFS on Linux github (e8fd45a0f9)
MFC after: 1 month
- Use spinlock_enter()/spinlock_exit() to prevent a thread holding a
debug lock from being preempted to prevent other threads waiting
on that lock from starvation.
- Handle the possibility of CPU migration in between the fetch of curcpu
and the call to spinlock_enter() by saving curcpu in a local variable.
- Use memory barriers to prevent reordering of loads and stores of the
data protected by the lock outside of the critical section
- Eliminate false sharing of the locks by moving them into the structures
that they protect and aligning them to a cacheline boundary.
- Record the owning thread in the lock to make debugging future problems
easier.
Reviewed by: rpaulo (initial version)
MFC after: 2 weeks
initialisation to be enabled (1) / disabled (0) defaults to enabled.
This is useful for devices which have a slow trim speed and are either
new or have otherwise already been wiped e.g. secure erase.
PR: kern/173116
Submitted by: Steven Hartland
Approved by: pjd (mentor)
making range consolidation much more effective particularly for small
deletes.
This reduces memory used by the free map as well as reducing the number
of bio requests down to geom required to process all deletes.
In tests this achieved a factor of 10 reduction of trim ranges / geom
call downs.
While I'm here correct the description of zio_vdev_io_start.
PR: kern/173254
Submitted by: Steven Hartland
Approved by: pjd (mentor)
Also, make it explicit that V_XATTRDIR is not properly supported in gfs
code yet.
The bad code was plain incorrect: (a) it spoiled handling of v_usecount
reaching zero and (b) it leaked v_holdcnt.
The ugly code employs potentially unsafe locking tricks.
Ideally we should separate vnode lifecycle and gfs node lifecycle.
A gfs node should have its own reference count where its child nodes
should be accounted.
PR: kern/151111
Reviewed by: kib
MFC after: 13 days
Introduce a new dataset aclmode setting "restricted" to protect ACL's
being destroyed or corrupted by a drive-by chmod.
illumos-gate 13889:a67716f16746
3254 add support in zfs for aclmode=restricted
References:
https://www.illumos.org/issues/3254
MFC after: 2 weeks
Import the zio nop-write improvement from Illumos. To reduce I/O,
nop-write omits overwriting data if the checksum (cryptographically
secure) of new data matches the checksum of existing data.
It also saves space if snapshots are in use.
It currently works only on datasets with enabled compression, disabled
deduplication and sha256 checksums.
IllumOS 13887:196932ec9e6a and 13888:7204b3392a58
3236 zio nop-write
References:
https://www.illumos.org/issues/3236
MFC after: 2 weeks
* There is no need for the delayed destruction of znodes via taskqueue,
now that we do not need to fear recursion from getnewvnode into
zfs_inactive and zfs_freebsd_reclaim, thus making znode/vnode state
machine a bit simpler.
* More complete porting of zfs_inactive from Solaris VFS model to FreeBSD
vop_inactive and vop_reclaim model. All destructive actions are done
in zfs_freebsd_reclaim.
This allows to simplify zfs_zget logic.
* Allow zfs_zget to return a doomed vnode if the current thread already
has an exclusive lock on the vnode.
* Clean up Solaris-isms like bailing out of reclaim/inactive on certain
values of v_usecount (aka v_count) or directly messing with this counter.
* Do not clear z_vnode while znode is still accessible.
z_vnode should be cleared only after zfs_znode_dmu_fini.
Otherwise zfs_zget may get an effectively half-deconstructed znode.
This allows to simplify zfs_zget logic further.
The above changes fix at least two known/reported problems:
o An indefinite wait in the following code path:
vgone -> VOP_RECLAIM -> zfs_freebsd_reclaim -> vnode_destroy_vobject ->
put_pages -> zfs_write -> zil_commit -> zfs_zget
This happened because vgone marks a vnode as VI_DOOMED before calling
VOP_RECLAIM, but zfs_zget would not return a doomed vnode under any
circumstances.
The fix in this change is not complete as it won't fix a deadlock between
two threads doing VOP_RECLAIM where one thread is in zil_commit trying to
zfs_zget a znode/vnode being reclaimed by the other thread, which would be
blocked trying to enter zil_commit. This type of deadlock has not been
reported as of now.
o An indefinite wait in the unmount path caused by a znode "falling through
the cracks" in inactive+reclaim. This would happen if the znode is unlinked
while its vnode is still active.
To Do: pass locking flags parameter to zfs_zget, so that the zfs-vfs
glue code doesn't have to re-lock a vnode but could ask for proper locking
from the very start. This would also allow for the higher level code to
obtain a doomed vnode when it is expected/requested. Or to avoid blocking
when it is not allowed (see zil_commit example above).
ffs_vgetf seems like a good source of inspiration.
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 6 weeks
... otherwise zfs_getpages would mostly be called with one page at a time.
It is expected that ZFS VOP_BMAP is only called from vnode_pager_haspage.
Since ZFS files can have variable block sizes and also because we don't
really know if any given blocks are consecutive, we can not really report
any additional blocks behind or ahead of a given block. Since physical
block numbers do not make sense for ZFS, we do not do any real translation
and thus pass back blk = lblk. The net effect is that vnode_pager_haspage
knows that the block exists and that the pages backed by the block can be
accessed. vnode_pager_haspage may be wrong about the exact count of the
pages backed by the block, because of a variable block size, which
vnode_pager_haspage doesn't really know - it only knows max block size in
a filesystem. So pages from multiple blocks can be passed to zfs_getpages,
but that is expected and correctly handled.
vnode_pager should not call zfs_bmap for any other reason, because ZFS
implements VOP_PUTPAGES and thus vnode_pager_generic_getpages is not used.
vfs_cluster code vfs_bio code should not be called for ZFS, because ZFS does
not use buffer cache layer.
Also, ZFS does not use vn_bmap_seekhole, it has its prviate mechanism for
working with holes.
The above list should cover all the current calls to VOP_BMAP.
Reviewed by: kib
MFC after: 6 weeks
Illumos 13886:e3261d03efbf
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
References:
https://www.illumos.org/issues/3349
MFC after: 1 week
... because the latter makes some decision based on the version.
This is especially important for raidz vdevs.
This is similar to what spa_load does.
This is not an issue for upstream because they do not seem to support
using raidz as a root pool.
Reported by: Andrei Lavreniyuk <andy.lavr@gmail.com>
Tested by: Andrei Lavreniyuk <andy.lavr@gmail.com>
MFC after: 6 days
The call is a NOP, because pool version in spa_ubsync.ub_version is not
initialized and thus appears to be zero.
If the version is properly set then the call leads to a NULL pointer
dereference because the spa object is still under-constructed.
The same change was independently made in the upstream as a part of
a larger change (4445fffbbb1ea25fd0e9ea68b9380dd7a6709025).
MFC after: 6 days
if we fail to generate a proper root pool configuration based on disk
probing. Currently we can not properly generate the configuration for
multi-vdev pools. Make that explicit.
Reported by: madpilot, Bartosz Stec <bartosz.stec@it4pro.pl>
Tested by: madpilot, Bartosz Stec <bartosz.stec@it4pro.pl>
MFC after: 4 days
designator to select a process which is waited for. The system call
optionally returns siginfo_t which would be otherwise provided to
SIGCHLD handler, as well as extended structure accounting for child
and cumulative grandchild resource usage.
Allow to get the current rusage information for non-exited processes
as well, similar to Solaris.
The explicit WEXITED flag is required to wait for exited processes,
allowing for more fine-grained control of the events the waiter is
interested in.
Fix the handling of siginfo for WNOWAIT option for all wait*(2)
family, by not removing the queued signal state.
PR: standards/170346
Submitted by: "Jukka A. Ukkonen" <jau@iki.fi>
MFC after: 1 month
... before trying to destroy the zvol snapshots themselves.
PR: kern/173442
Reported by: Petri Helenius <petri@helenius.fi>,
mm
Obtained from: Brian Behlendorf <behlendorf1@llnl.gov>,
Illumos Bug #3170
Tested by: Petri Helenius <petri@helenius.fi>
MFC after: 10 days
Illumos r13840:97fd5cdf328a:
3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()
Illumos r13849:3468a95b27cd:
3258 ztest's use of file descriptors is unstable
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
Otherwise we could fail with an incorrect error if e.g. parent
object id is removed too or we can even return a wrong vnode if
parent object has been already re-used.
Discussed with: pjd
Also see: http://article.gmane.org/gmane.os.freebsd.devel.file-systems/13863
MFC after: 26 days
