RPCINFO on macOS behaves different compared to other linux clients and
doesn't provide request address in rpcb structure of the
RPCBPROC_GETADDRLIST call which doesn't seem to be forbidden.
In this case RPCBIND uses RPC call's source address and picks a
closest corresponding local address. If there are no addresses in the
same subnet as the source address, return of RPCBIND may vary
depending on the order of addresses returned in getifaddrs. If a link
local precedes global address it may be returned even if the request
comes from neither a link local nor from link local in a different
scope, which will prevent services like nfs from working in tpc6
scenario on macOS clients. Issue can be seen only on FreeBSD rpcbind
port due to changes in workflow of addrmerge call.
Submitted by: Dmitry Ovsyannikov (Dmitry.Ovsyannikov@dell.com)
Reviewers: dab
Differential Revision: https://reviews.freebsd.org/D31491
Sponsored by: Dell EMC
MFC to: stable/12, stable/13
MFC after: 1 week
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
If a signal was delivered while the main thread was not in poll(2) and after
check was performed, we could reenter poll and never detect termination. Fix
this with the pipefd trick. (This race was introduced very recently, in
r327482.)
PR: 224503
Reported by: kib
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Add missed unistd.h include. Not sure where it was lost; I believe it
compiled before I submitted the change.
PR: 224503
Reported by: Cy Schubert <Cy.Schubert AT komquats.com>
Sponsored by: Dell EMC Isilon
syslog(3), routines used in write_warmstart(), and exit(3) are all
signal-unsafe. Instead, set a signal-safe flag and check the flag in the
rpcbind main loop to shutdown safely.
PR: 224503
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13728
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
rpcbind(8) with/without warmstart support.
The knob defaults to off to preserve POLA for the feature.
See rpcbind(8) for more details about the warmstart feature.
MFC after: 7 weeks
Relnotes: yes
Sponsored by: Dell EMC Isilon
warmstart support saves portmap/rpcbind(8) registration state on exit and
restores the saved registration state on restart.
MFC after: 7 weeks
Sponsored by: Dell EMC Isilon
usr.sbin/rpcbind/tests/addrmerge_test.c
Fix some sizeof calculations that work only by luck on 64-bit
platforms.
PR: 210314
Reviewed by: ngie
Approved by: re (kib)
Reported by: Mark Millard
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6855
xdr_rpcproc, xdr_rpcprog and xdr_rpcvers were broken in older
versions of FreeBSD but fixed in r296394. Give them some use
hoping they help make the code somewhat more readable.
Not returning if rtype == RPCBVERS_STAT will cause us to overrun the inf array, as
it's defined to be exactly RPCBVERS_STAT elements in rpcb_prot.x:
> include/rpc/rpcb_prot.x:typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
The proposed change also matches the rest of the rtype upper bound checks in the
file, so the original change was likely a typo.
MFC after: 2 weeks
Reported by: Coverity
CID: 1007567
Reviewed by: truckman
Sponsored by: EMC / Isilon Storage Division
In the event MK_INET6 != no in userspace, but is disabled in the
kernel, or if there aren't any IPv6 addresses configured in userspace
(for lo0 and all physical interfaces), rpcbind would terminate
immediately instead of silently failing on
Skip over the IPv6 block to its respective cleanup with freeifaddrs if
creating the socket failed instead of terminating rpcbind immediately
MFC after: 6 days
X-MFC with: r300932
Reported by: O. Hartmann <ohartman@zedat.fu-berlin.de>
Sponsored by: EMC / Isilon Storage Division
- getaddrinfo() sets res = NULL on failure and freeaddrinfo() always
dereferences its argument, so we should only free the address list after
a successful call.
- Address a second potential leak caused by getaddrinfo(AF_INET6)
overwriting the address list returned by getaddrinfo(AF_INET).
X-MFC-With: r300941
- malloc failing will result in a delayed segfault
- socket failing will result in delayed failures with setsockopt
Exit in the event that either of these high-level conditions are met.
Reported by: Coverity
CID: 976288, 976321, 976858
Sponsored by: EMC / Isilon Storage Division
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
rpcbind/check_bound.c
Fix CID1347798, a memory leak in mergeaddr.
rpcbind/tests/addrmerge_test.c
Fix CID1347800 through CID1347803, memory leaks in ATF tests. They
are harmless because each ATF test case runs in its own process, but
they are trivial to fix. Fix a few other leaks that Coverity didn't
detect, too.
Coverity CID: 1347798, 1347800, 1347801, 1347802, 1347803
MFC after: 2 weeks
X-MFC-With: 293229
Sponsored by: Spectra Logic Corp
Fix a bug in rpcbind for multihomed hosts. If the server had interfaces on
two separate subnets, and a client on the first subnet contacted rpcbind at
the address on the second subnet, rpcbind would advertise addresses on the
first subnet. This is a bug, because it should prefer to advertise the
address where it was contacted. The requested service might be firewalled
off from the address on the first subnet, for example.
usr.sbin/rpcbind/check_bound.c
If the address on which a request was received is known, pass that
to addrmerge as the clnt_uaddr parameter. That is what addrmerge's
comment indicates the parameter is supposed to mean. The previous
behavior is that clnt_uaddr would contain the address from which the
client sent the request.
usr.sbin/rpcbind/util.c
Modify addrmerge to prefer to use an IP that is equal to clnt_uaddr,
if one is found. Refactor the relevant portion of the function for
clarity, and to reduce the number of ifdefs.
etc/mtree/BSD.tests.dist
usr.sbin/rpcbind/tests/Makefile
usr.sbin/rpcbind/tests/addrmerge_test.c
Add unit tests for usr.sbin/rpcbind/util.c:addrmerge.
usr.sbin/rpcbind/check_bound.c
usr.sbin/rpcbind/rpcbind.h
usr.sbin/rpcbind/util.c
Constify some function arguments
Reviewed by: imp
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4690
transport specific form of a universal transport address. The
structure is expected to be opaque to consumers. In the current
implementation, the structure contains a pointer to a buffer
that holds the actual address.
In rpcbind(8), netbuf structures are copied directly, which would
result in two netbuf structures that reference to one shared
address buffer. When one of the two netbuf structures is freed,
access to the other netbuf structure would result in an undefined
result that may crash the rpcbind(8) daemon.
Fix this by making a copy of the buffer that is going to be freed
instead of doing a shallow copy.
Security: FreeBSD-SA-15:24.rpcbind
Security: CVE-2015-7236
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
