The tests require SES hardware. Without it, the test cases will be
skipped.
Reviewed by: ken
Differential Revision: https://reviews.freebsd.org/D31809
Sponsored by: Axcient
MFC after: 2 weeks
* Prefer variables of small scope rather than large scope
* Remove a magic number
* style(9) for return statements
* Remove the get_enc_status method, which never did anything
* Fix a variable type in the handle_string method
* Proofread some comments
MFC after: 2 weeks
Sponsored by: Spectra Logic, Axcient
Reviewed by: ken, mav
Differential Revision: https://reviews.freebsd.org/D31686
The kern.elf64.aslr.pie_enable and kern.elf32.aslr.pie_enable sysctls
control the default setting for PIE binary address randomization, but
it is possible to enable or disable ASLR on a per-process basis. Use
procctl(2) to query whether ASLR is enabled.
(Note that with ASLR enabled but sysctl kern.elf64.aslr.pie_enable=0
a PIE binary will in effect have randomization disabled, and be
functional with msan. This is not intended as as a user-facing control
though. The user can use proccontrol(1) to disable aslr for the
process.)
Approved by: dim
Obtained from: LLVM 64de0064f315f57044294879d9ff4eacb454d45b
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33933
pthread_create() returns 0 on success or an error number on failure.
Reviewed by: khng, markj
Differential Revision: https://reviews.freebsd.org/D33930
vt_fini_logos() calls vtbuf_grow(), which reallocates the console
window's buffer using malloc(M_WAITOK). Because vt_fini_logos() is
called via a callout, we end up panicking if INVARIANTS is enabled.
Fix the problem simply by clearing the logos using a timed taskqueue.
taskqueue_thread is formally allowed to sleep; of course, if we actually
end up sleeping to satisfy the allocation, then we have bigger problems.
PR: 260896
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33932
The Branch Target Identification (BTI) Armv8-A extension adds new
instructions that can be placed where we may indirrectly branch to,
e.g. at the start of a function called via a function pointer. We can't
emulate these in DTrace as the kernel will have raised a different
exception before the DTrace handler has run.
Skip over the BTI instruction if it's used as the first instruction in
a function.
Sponsored by: The FreeBSD Foundation
When running the installer, in particular disextract (which is so far
the only part converted to bsddialog), on serial console or vt100 or
actually any terminal without color support, it failed to start.
This change makes bsddialog fallback on the black and white theme.
This is incorporated in newer version of bsddialog which will be
imported soon.
PR: 261272
Reported by: thj
Differential Revision: https://reviews.freebsd.org/D33920
Before this change bufdaemon and bufspacedaemon threads used
kthread_shutdown() to stop activity on system shutdown. The problem is
that kthread_shutdown() has no idea about the wait channel and lock used
by specific thread to wake them up reliably. As result, up to 9 threads
could consume up to 9 seconds to shutdown for no good reason.
This change introduces specific shutdown functions, knowing how to
properly wake up specific threads, reducing wait for those threads on
shutdown/reboot from average 4 seconds to effectively zero.
MFC after: 2 weeks
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D33936
This addresses the following boot message:
/etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5).
Reported by: Mark Millard
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Fixes: bfb7a31b6a ("rc: Hook zfskeys to the build")
Fixes: 33ff39796f ("Add zfskeys rc.d script for auto-loading encryption keys")
These ciphers are now supported via OCF or 'struct enc_xform'.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33889
This is a synchronous software API which wraps the existing software
implementation shared with OCF. Note that this will not currently
use optimized backends (such as ossl(4)) but may be appropriate for
operations on small buffers.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33524
All it is right now is some #if 0ed Solaris code that returns ENOSYS,
and is only applicable for the Solaris blockdev layer.
In the Illumos gate, there's a single user: rmformat(1);
I recommend a read of the manual as a blast from the past, but, well
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12844Closes#12969
by replaceing of spin_lock() call with spin_lock_irqsave()
This fixes following panic in drm-kmod:
panic: mi_switch: switch in a critical section
cpuid = 2
time = 1636939794
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b
vpanic() at vpanic+0x187
panic() at panic+0x43
mi_switch() at mi_switch+0x198
__mtx_lock_sleep() at __mtx_lock_sleep+0x1c9
__mtx_lock_flags() at __mtx_lock_flags+0xa2
linux_wake_up() at linux_wake_up+0x38
__active_retire() at __active_retire+0xb7
dma_fence_signal() at dma_fence_signal+0x100
dma_resv_add_shared_fence() at dma_resv_add_shared_fence+0x96
i915_gem_do_execbuffer() at i915_gem_do_execbuffer+0x11d0
i915_gem_execbuffer2_ioctl() at i915_gem_execbuffer2_ioctl+0x19a
drm_ioctl_kernel() at drm_ioctl_kernel+0x72
drm_ioctl() at drm_ioctl+0x2c4
linux_file_ioctl() at linux_file_ioctl+0x297
kern_ioctl() at kern_ioctl+0x1dc
sys_ioctl() at sys_ioctl+0x124
amd64_syscall() at amd64_syscall+0x124
fast_syscall_common() at fast_syscall_common+0xf8
--- syscall (54, FreeBSD ELF64, sys_ioctl)
MFC after: 1 week
Reviewed by: manu
Reported by: Graham Perrin <grahamperrin_AT_gmail_DOT_com>
PR: 261166
Differential Revision: https://reviews.freebsd.org/D33888
The only event hooked up is NOTE_ATTRIB, which is triggered when the
device is resized. Support for other NOTE_* events to follow.
Reviewed by: kib, jhb
Differential Revision: https://reviews.freebsd.org/D33402
sys/cam/scsi/scsi_sa.c:
Add comments explaining the priority order of the various
sources of timeout values. Also, explain that the probe
that pulls in drive recommended timeouts via the REPORT
SUPPORTED OPERATION CODES command is in a race with the
thread that creates the sysctl variables. Because of that
race, it is important that the sysctl thread not load any
timeout values from the kernel environment.
share/man/man4/sa.4:
Use the Sy macro to emphasize thousandths of a second
instead of capitalizing it.
Requested by: Warner Losh <imp@freebsd.org>
Requested by: Daniel Ebdrup Jensen <debdrup@freebsd.org>
Sponsored by: Spectra Logic
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33883
Tape drives that arrive after boot will still use any loader
tunables that apply to that instance.
Requested by: Pau Amma <pauamma@gundo.com>
MFC After: 1 week
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D33883
Summary:
The sa(4) driver has historically used tape drive timeouts that
were one-size fits all, with compile-time options to adjust a few
of them.
LTO-9 drives (and presumably other tape drives in the future)
implement a tape characterization process that happens the first
time a tape is loaded. The characterization process formats the
tape to account for the temperature and humidity in the environment
it is being used in. The process for LTO-9 tapes can take from 20
minutes (I have observed 17-18 minutes) to 2 hours according to the
documentation.
As a result, LTO-9 drives have significantly longer recommended
load times than previous LTO generations.
To handle this, change the sa(4) driver over to using timeouts
supplied by the tape drive using the timeout descriptors obtained
through the REPORT SUPPORTED OPERATION CODES command. That command
was introduced in SPC-4. IBM tape drives going back to at least
LTO-5 report timeout values. Oracle/Sun/StorageTek tape drives
going back to at least the T10000C report timeout values. HP LTO-5
and newer drives report timeout values. The sa(4) driver only
queries drives that claim to support SPC-4.
This makes the timeout settings automatic and accurate for newer
tape drives.
Also, add loader tunable and sysctl support so that the user can
override individual command type timeouts for all tape drives in
the system, or only for specific drives.
The new global (these affect all tape drives) loader tunables are:
kern.cam.sa.timeout.erase
kern.cam.sa.timeout.load
kern.cam.sa.timeout.locate
kern.cam.sa.timeout.mode_select
kern.cam.sa.timeout.mode_sense
kern.cam.sa.timeout.prevent
kern.cam.sa.timeout.read
kern.cam.sa.timeout.read_position
kern.cam.sa.timeout.read_block_limits
kern.cam.sa.timeout.report_density
kern.cam.sa.timeout.reserve
kern.cam.sa.timeout.rewind
kern.cam.sa.timeout.space
kern.cam.sa.timeout.tur
kern.cam.sa.timeout.write
kern.cam.sa.timeout.write_filemarks
The new per-instance loader tunable / sysctl variables are:
kern.cam.sa.%d.timeout.erase
kern.cam.sa.%d.timeout.load
kern.cam.sa.%d.timeout.locate
kern.cam.sa.%d.timeout.mode_select
kern.cam.sa.%d.timeout.mode_sense
kern.cam.sa.%d.timeout.prevent
kern.cam.sa.%d.timeout.read
kern.cam.sa.%d.timeout.read_position
kern.cam.sa.%d.timeout.read_block_limits
kern.cam.sa.%d.timeout.report_density
kern.cam.sa.%d.timeout.reserve
kern.cam.sa.%d.timeout.rewind
kern.cam.sa.%d.timeout.space
kern.cam.sa.%d.timeout.tur
kern.cam.sa.%d.timeout.write
kern.cam.sa.%d.timeout.write_filemarks
The values are reported and set in units of thousandths of a
second.
share/man/man4/sa.4:
Document the new loader tunables in the sa(4) man page.
sys/cam/scsi/scsi_sa.c:
Add a new timeout_info array to the softc.
Add a default timeouts array, along with descriptions.
Add a new sysctl tree to the softc to handle the timeout
sysctl values.
Add a new function, saloadtotunables(), that will load
the global loader tunables first and then any per-instance
loader tunables second.
Add creation of the new timeout sysctl variables in
sasysctlinit().
Add a new, optional probe state to the sa(4) driver. We
previously didn't do any probing, but now we probe for
timeout descriptors if the drive claims to support SPC-4 or
later. In saregister(), we check the SCSI revision and
either launch the probe state machine, or announce the
device and become ready.
In sastart() and sadone(), add support for the new
SA_STATE_PROBE. If we're probing, we don't go through
saerror(), since that is currently only written to handle
I/O errors in the normal state.
Change every place in the sa(4) driver that fills in
timeout values in a CCB to use the new timeout_info[] array
in the softc.
Add a new saloadtimeouts() routine to parse the returned
timeout descriptors from a completed REPORT SUPPORTED
OPERATION CODES command, and set the values for the
commands we support.
MFC after: 1 week
Sponsored by: Spectra Logic
Test Plan:
Try this out with a variety of tape drives and make sure the timeouts that
result (sysctl kern.cam.sa to see them) are reasonable.
Reviewers: #manpages, #cam
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D33883
In vm_phys_alloc_seg_contig, in allocating multiple memory blocks for
a huge allocation, ensure that the end of the allocated range does not
exceed the upper segment limit.
Reorder a couple of checks to improve code layout.
Reviewed by: alc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33870
The kernel pointers in this structure need to be 32-bit pointers,
not native pointers to 32-bit integers.
Reviewed by: kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33905
This reverts commit 5eb81a4b40, reversing
changes made to c6806434e7 and
this reverts commit 679ff61123.
What happend is git rebase --rebase-merges doesn't do what is expected.
When a use sets umask in login.conf(5) to 027 or 077 a subsequently
fetched /var/db/ntpd.leap-seconds.list will inherit the permissions
allowed by the umask, resulting in a file that may not be readable
ntpd running under the ntp account. This patch adds a umask command
to preempt the umask in login.conf(5) prior to fetching a new copy
of the leap-seconds file.
PR: 261298
Reported by: Martin Waschbusch <martin@waschbuesch.de>
MFC after: 3 days
The clang compiler recently got an update that generates warnings of unused
variables where they were set, and then never used. This revision goes through
the tcp stack and cleans all of those up.
Reviewed by: Michael Tuexen, Gleb Smirnoff
Sponsored by: Netflix Inc.
Differential Revision:
All supported Xen instances by FreeBSD provide a local APIC
implementation, so there's no need to replace the native local APIC
implementation anymore.
Leave just the ipi_vectored hook in order to be able to override it
with an implementation based on event channels if the underlying local
APIC is not virtualized by hardware. Note the hook cannot use ifuncs,
because at the point where ifuncs are resolved the kernel doesn't yet
know whether it will benefit from using the optimization.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D33917
Instead of using event channels or hypercalls to deal with IPIs and
NMIs.
Using a hardware virtualized APIC should be faster than using any PV
interface, since the VM exit can be avoided.
Xen exposes whether the domain is using hardware assisted x{2}APIC
emulation in a CPUID bit.
Sponsored by: Citrix Systems R&D
Once a crypto cursor has reached the end of its buffer, it is invalid to
call crypto_cursor_segment() for at least some crypto buffer types.
Reorganize loops to avoid this.
Fixes: cfb7b942be ("cryptosoft: Use multi-block encrypt/decrypt for non-AEAD ciphers.")
Fixes: a221a8f4a0 ("cryptosoft: Use multi-block encrypt/decrypt for AES-GCM.")
Fixes: f8580fcaa1 ("cryptosoft: Use multi-block encrypt/decrypt for AES-CCM.")
Fixes: 5022c68732 ("cryptosoft: Use multi-block encrypt/decrypt for ChaCha20-Poly1305.")
Reported and tested by: madpilot
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
... rather than using the KERN_PROC_PS_STRINGS value to derive the top
of the user address space.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33708
This provides information about fixed regions of the target process'
user memory map.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33708
The approach taken by the stack gap implementation was to insert a
random gap between the top of the fixed stack mapping and the true top
of the main process stack. This approach was chosen so as to avoid
randomizing the previously fixed address of certain process metadata
stored at the top of the stack, but had some shortcomings. In
particular, mlockall(2) calls would wire the gap, bloating the process'
memory usage, and RLIMIT_STACK included the size of the gap so small
(< several MB) limits could not be used.
There is little value in storing each process' ps_strings at a fixed
location, as only very old programs hard-code this address; consumers
were converted decades ago to use a sysctl-based interface for this
purpose. Thus, this change re-implements stack address randomization by
simply breaking the convention of storing ps_strings at a fixed
location, and randomizing the location of the entire stack mapping.
This implementation is simpler and avoids the problems mentioned above,
while being unlikely to break compatibility anywhere the default ASLR
settings are used.
The kern.elfN.aslr.stack_gap sysctl is renamed to kern.elfN.aslr.stack,
and is re-enabled by default.
PR: 260303
Reviewed by: kib
Discussed with: emaste, mw
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
ASLR stack randomization will reappear in a forthcoming commit. Rather
than inserting a random gap into the stack mapping, the entire stack
mapping itself will be randomized in the same way that other mappings
are when ASLR is enabled.
No functional change intended, as the stack gap implementation is
currently disabled by default.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
Rather than fetching the ps_strings address directly from a process'
sysentvec, use this macro. With stack address randomization the
ps_strings address is no longer fixed.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
