Several atf components require C++, and the test suite is not usable
if building WITHOUT_CXX.
Reviewed by: bdrewery, jmmv
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7597
This is used by libdtrace to determine the data model of target processes.
This allows for the creation of pid provider probes in 32-bit processes on
amd64.
MFC after: 1 month
Previously, librtld_db just hardcoded /libexec/ld-elf.so, which isn't
correct for processes that aren't using the native ABI. With this change,
librtld_db can be used to inspect non-native processes; in particular,
dtrace -c now works for 32-bit executables on amd64.
MFC after: 1 month
It is a maintained and updated runtime exception stack unwinder that
should be a drop-in replacement.
It can be disabled by setting WITHOUT_LLVM_LIBUNWIND in src.conf.
PR: 206039 [exp-run]
Sponsored by: The FreeBSD Foundation
It was added to sys.mk relatively recently (r274503) for EFI builds
but is no longer used by the base system. The in-tree binutils are
outdated, will not be updated, and will be removed in the future.
Remove it from the toolchain build now to slightly simplify the build
and make sure we don't grow an accidental dependency.
Note that this affects only the toolchain build, and does not affect
/usr/bin/objdump in the built world.
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6460
This also adds missing s/aarch64/arm64 to the sys.mk version and also
adds back armv6hf for universe since it was added to the sys.mk version
in r300438.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7159
This improves buildworld, toolchain, kernel-toolchain, and universe targets.
See r300354 or src.conf(5) for more details.
Approved by: re (gjb)
Relnotes: yes (r300354)
Sponsored by: EMC / Isilon Storage Division
kgzldr.o is installed into /usr/lib but using bsd.prog.mk. Add
/usr/lib to the base system directory list so that debug files are
installed into /usr/lib/debug/usr/lib, not /usr/lib/.debug .
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The DPADD data in .depend will be redundant with what is in the .meta file.
Also extend NO_EXTRADEPEND support to bsd.prog.mk.
Approved by: re (blanket, META_MODE)
Sponsored by: EMC / Isilon Storage Division
This is mostly fixing META_MODE with realinstall wanting a .meta
file when it does not need one. These targets really should
always run though since they have _SUBDIR on them.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- This was broken by r300350 and r300885.
- Add some comments around the external GCC logic since it is spread out
and in need of some cleanup.
- The problem was that X_COMPILER_TYPE is always defined from CC->XCC's
default, so if /usr/bin/cc is GCC (as it is on native powerpc64) then
X_COMPILER_TYPE was getting GCC and triggering the external logic in
Makefile.libcompat. It was intended to always provide -isystem with
GCC since --sysroot is used into the lib32 sysroot which won't modify
the header path without the -isystem. The use of the libc++/std=c++11
override was only intended to be used for external compilers though
(more accurately GCC 4.8+ but that's a separate assumption to
cleanup). Apply the same logic from Makefile.inc1 to Makefile.libcompat
to only add the libc++ override when needed for external compilers.
Pointyhat to: bdrewery
Tested with: native ppc64 (swills), universe, ppc64 xtoolchain,
amd64 xtoolchain, sparc64 cross-build of ppc64 (host GCC 4.2)
Reported by: andreast, swills
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
Due to META_MODE being passed into the environment it tends
to keep growing with the defaults.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r300343.
This is important for the OBJS_DEPEND_GUESS usage in
gnu/usr.bin/cc/cc_tools.
See comments for more details.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This is important to allow a Makefile to override OBJS_DEPEND_GUESS for
handling in META_MODE when its depend files are missing.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This will print a set of variables from make on error using
MAKE_PRINT_VAR_ON_ERROR. It is already enabled for the DIRDEPS_BUILD.
It may make sense to enable this in the non-meta mode as well once
people are more used to its more verbose error output.
This makes it much simpler to see which .meta file is used when a
command files so that it may be inspected for the build command.
Suggested by: sjg
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
Using -B already sets .MAKE.MODE=compat but it was leaving
MK_META_MODE set which could still cause other MK_META_MODE==yes
checks to trigger.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
A simplified example of the library targets with WITH_DEBUG_FILES is:
libgeom.so.5: libgeom.so.5.full
cp libgeom.so.5.full libgeom.so.5
libgeom.so.5.full:
ln -s libgeom.so.5 libgeom.so
cc -o libgeom.so.5.full *.o
Before, or without, WITH_DEBUG_FILES it is:
libgeom.so.5:
ln -s libgeom.so.5 libgeom.so
cc -o libgeom.so.5 *.o
The problem is that bmake considers the link source for the libgeom.so
link in the libgeom.so.5.full target as being a dependency for
libgeom.so.5.full. That resolves to libgeom.so.5. Thus a cyclic
dependency is created. The result of this is that if libgeom.so.5 is
created with a newer timestamp than libgeom.so.5.full, then
libgeom.so.5.full will be rebuilt on the next build. This causes a
chain reaction of everything in the build relinking, or hitting the
problem itself.
Moving the link creation to the target that actually creates
libgeom.so.5 fixes the problem. The simplest fix here is to just
duplicate the logic.
Submitted by: sjg
Approved by: re (implicit)
The WITH_META_MODE build is intended to be a working incremental build.
It spies on the build command to see if things should be rebuilt if the
command changes. If you run buildworld, it builds a cross-compiler,
then do installworld and buildworld again it will invoke the
WITH_SYSTEM_COMPILER logic. This then adds on -target/--sysroot, etc,
and causes rebuilds due to the changed build command even though the
compiler used is technically the same revision. Since the incremental
build is not cleaning anything by default then there is much
less risk to rebuilding the already-existing cross-compiler. Just
disable the combined logic and always use and build the cross-compiler.
An alternative to this would be to always pass -target/--sysroot. Doing
so may occur in the future.
Sponsored by: EMC / Isilon Storage Division
Using buildworld, installworld, buildworld. It is expected that nothing
should rebuild. However any host tool used could have its timestamp
updated. Any library used by dynamic tools could have its timestamp
updated. The filemon(4) data in the .meta files captures all reads to
these files. This causes the 2nd buildworld to rebuild everything since
host tools and files have been updated.
Because the build is self-reliant and bootstraps itself, it should be
safe to ignore mtime changes on host files used during the build. Host
files should only impact the build of legacy, build-tools, bootstrap-tools,
cross-tools, but those are already intended to be reproducible from its
own bootstrapping. It is possible in a rare case that a bug in a host
file does produce a broken build tool. If that happens it will just
have to be communicated properly.
An alternative solution would be to update the mtime of all files in the
object directory after installworld so that the host files are not newer
than the object files. That also requires special care for read-only
obj directories and special care to not mess with any intended timestamps in
the build, such as done for reproducibility.
Reported by: many
Sponsored by: EMC / Isilon Storage Division
Ccache will not affect the output of the objects, so just ignore it for
meta mode handling. This avoids having everything rebuild if ccache is
updated.
Sponsored by: EMC / Isilon Storage Division
The first file in these lists will generate everything else so only
it should be getting a .meta file. With bmake's missing=yes meta
feature these would otherwise cause a rebuild without the
.NOMETA hint.
Sponsored by: EMC / Isilon Storage Division
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
Since META_MODE is being sold and used as a working incremental build, it won't
make much sense if filemon data is excluded. There is no way to recover
from that in a subsequent build.
Sponsored by: EMC / Isilon Storage Division
Adding .META to targets-to-build will ensure that they will rebuild if there
is no .meta file.
Adding it to all SUFFIXES and objects ensures that at least objects will
rebuild if there is no .meta file.
This will be reverted if bmake's behavior changes to rebuild on missing .meta
files.
Sponsored by: EMC / Isilon Storage Division
The C++ header files must be searched before /usr/include.
The original code in Makefile.inc1 did this before the change in r297271 to
use -isystem. The libc++ import in r300770 fixed the bug introduced in
r297271 by swapping XCFLAGS and XCXXFLAGS ordering in CROSSENV.
Moving the code from Makefile.inc1 to bsd.sys.mk in r300886 also made it
more difficult to control the order of the flags. CXXFLAGS is based on
CFLAGS, so any additions to it will come after CFLAGS. The CROSSENV
code from Makefile.inc1 was such that it was ensured the CXXFLAGS came
first by setting them directly in CXX. Using CXXFLAGS+=-I would work
here, but instead continue to use -isystem by adding it to CXX so it
comes before CFLAGS.
Reported by: dim
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
This fixes CROSS_TOOLCHAIN builds after r300886 since it
relies on X_COMPILER_TYPE being set.
The X_* vars will only represent the external compiler
being used.
Sponsored by: EMC / Isilon Storage Division
This allows respecting -nostdinc, -nostdinc++ and -nostdlib before
making the decision to add in -isystem, etc. The -isystem flags
are problematic for building lib/libc++ and lib/libcxxrt which wants
to only use its own headers.
More information the need of these flags can be found at
https://gcc.gnu.org/ml/gcc/2016-03/msg00219.html
This also reverts r300873.
Sponsored by: EMC / Isilon Storage Division
