Initialize rid to 0. This doesn't seem to make any difference
(the driver doesn't care what rid it gets and no-one seems to
check rid's value), but follows standard conventions.
Pass in our device_t to ahc_alloc(). We now use device_T
softc storage, so passing NULL results in a panic.
Set the unit number in our softc so that the driver core
can retrieve it.
ahc_pci.c:
Set the unit number in our softc so that the driver core
can retrieve it.
aic7770.c:
Insert our softc into the list of softcs when initialization
is successful.
aic7xxx.c:
Remove a workaround for an aic7895 bug we will never trigger.
Add additional diagnostic info to ahc_dump_card_state().
Always panic the system if a sequencer assertion fails.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Replace a hard coded number with a constant.
Guard against looping forever in ahc_pause_and_flushwork().
A hot eject or card failure may make the intstat register
return 0xFF, so limit the number of interrupts we'll process.
Correct the code in ahc_search_qinfifo() that guarantees that
the sequencer will see an abort collision if the qinfifo is
modified when a DMA is in progress. We now do this fixup
after modifying the queue. This guarantees that the HSCB
we place at the head of the queue is not the same as the
old head. Using "next hscb" (guaranteed not to be the
same as the first SCB) before clearing the queue could free
up the original head hscb to be used during a remove operation
placing it again at the head of the qinfifo.
aic7xxx.h:
Reduce the maximum number of outstanding commands to 253 from
254. To handle our output queue correctly on machines that only
support 32bit stores, we must clear the array 4 bytes at a
time. To avoid colliding with a DMA write from the sequencer,
we must be sure that 4 slots are empty when we write to clear
the queue. This reduces us to 253 SCBs: 1 that just completed
and the known three additional empty slots in the queue that
preceed it. Yahoo was able to force this race on one of their
systems. Interrupts were disabled for such a time that the
entire output queue was filled (254 entries complete without
any processing), and our 32bit write to clear the status clobbered
one entry.
Add a feature tag for devices that are removable.
aic7xxx.reg:
Never use the sequencer interrupt value of 0xF0. We need
to guanrantee that an INTSTAT value of 0xFF can only occur
during card failure or a hot-eject.
Align the busy targets table with the begining of scratch
space. This seems to appease a chip bug in the aic7895.
aic7xxx.seq:
Be sure to disable select-out after a bus free event that occurs
early in a selection. If we don't disable select-out, we will
believe that it is enabled even though a new selection will never
occur.
Move the clearing of SELDI to just before a jump. This appeases
another chip bug of the aic7895.
Make the target mode command loop a bit more efficient.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Properly cleanup the last SCB we tested against should we
fail to properly find an SCB for a reselection.
Add some additional sequencer debugging code.
aic7xxx_freebsd.c:
Limit the driver to 253 outstanding commands per adapter.
Guard against overflow in timeout handling.
aic7xxx_inline.h:
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
aic7xxx_pci.c:
Set the removable feature for the apa1480 cardbus and the 29160C
Compact PCI card.
Don't report high byte termination information for narrow cards.
Use a PCI read rather than a questionable delay when fetching/setting
termination settings.
- fix cosmetics to shut-up compiler in -pedantic mode (axe several unused vars
and provide default clause in several switch() statements).
No response from: -ports
to be used as the -width parameter, it is provided solely for backwards
compatibility with old mdoc(7). To make this work, mdocNG is forced to
provide a dummy ``Ds'' macro.
to preceed a buildkernel.
The buildworld is still required when upgrading across major releases,
across binutil upgrades and when config changes version. If
buildkernel breaks, and you haven't done a buildworld, then do not
complain unless you do a buildworld and it still breaks.
changed this due to the undesirable side effects that putting KERNEL
in /etc/make.conf was having on people's lives. Also update the
instructions as well.
already used by the kernel makefiles themselves, and this leads to a lot
of trouble when people put "KERNEL=MYKERNEL" in make.conf. Bite the bullet
and change it to KERNCONF instead, before it gets too far entrenched.
The kernel Makefiles use ${KERNEL} as the name of what to install the
kernel as, eg: /boot/${KERNEL}/kernel or /${KERNEL}. This leads to much
unhappiness with things like /LOCAL instead of /kernel. buildkernel is
severely limited as it is only useful directly after a buildworld.
Reviewed by: jhb
FreeBSD 3.x or so when the 'make depend' picked up the opt_foo.h files.
Convert warnings into actual errors in the hope that buildkernel users
will pay more attention. :-(
- replace the simplelock in struct vm_zone with a mutex.
- use a proper SLIST rather than a hand-rolled job for the zone list.
- add a subsystem lock that protects the zone list and the statistics
counters.
- merge _zalloc() into zalloc() and _zfree() into zfree(), and
move them below _zget() so there's no need for a prototype.
- add two initialization functions: one which initializes the
subsystem mutex and the zone list, and one that currently doesn't
do anything.
- zap zerror(); use KASSERTs instead.
- dike out half of sysctl_vm_zone(), which was mostly trying to do
manually what the snprintf() call could do better.
Reviewed by: jhb, jasone
enabled by the option "-s" (for dSt). This returned the default behavior
to its original form.
The new option name is not "-d" because that would cause associations with
"debug" and cron already has "-x" for debugging, so this would cause
confusion.
inline functions non-inlined. Hide parts of the mutex implementation that
should not be exposed.
Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).
Submitted by: peter
MFC'ed i due time. I can't test it under current right now because
netgraph seems to do unethical things with mutexes.
musycc:
Add status per channel.
Reduce printf chattyness
Keep error counters line if_mn does.
Increase descriptor count.
if_mn:
Support experimental unframed E1 lines.
These two drivers should share more code relating to framed channelized
TDM media in general (T1/E1/E3/T3, Sonet). Anyone interested email me.
interrupt threads to run with it always >= 1, so that malloc can
detect M_WAITOK from "interrupt" context. This is also necessary
in order to context switch from sched_ithd() directly.
Reviewed By: peter
declarations & their arguments; use only one tab after types; restore the
type of argv to sync with src tree style; sort new variables under main();
fix continuation indents; remove extra blank line before free()'s. Still
to do: fix snprintf() handling as nectar & bde suggested to me.
Submitted by: bde
it to make.h so both dir.c and util.c can use it, although bde didn't
particularly like this part of the idea, IMO it's cleaner than it was.
Submitted by: bde
