<netinet/tcp_fsm.h> is included into any compilation unit that needs
tcpstates[]. Also remove incorrect extern declarations and TCPDEBUG
conditionals. This allows kernels both with and without TCPDEBUG to
build, and unbreaks the tinderbox.
Approved by: re (rwatson)
general, when support was added to netstat for fetching data using sysctl,
no provision was left for fetching equivalent data from a core dump, and
in fact, netstat would _always_ fetch data from the live kernel using
sysctl even when -M was specified resulting in the user believing they
were getting data from coredumps when they actually weren't. Some specific
changes:
- Add a global 'live' variable that is true if netstat is running against
the live kernel and false if -M has been specified.
- Stop abusing the sysctl flag in the protocol tables to hold the protocol
number. Instead, the protocol is now its own field in the tables, and
it is passed as a separate parameter to the PCB and stat routines rather
than overloading the KVM offset parameter.
- Don't run PCB or stats functions who don't have a namelist offset if we
are being run against a crash dump (!live).
- For the inet and unix PCB routines, we generate the same buffer from KVM
that the sysctl usually generates complete with the header and trailer.
- Don't run bpf stats for !live (before it would just silently always run
live).
- kread() no longer trashes memory when opening the buffer if there is an
error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX.
- The multicast routing code doesn't fallback to kvm on live kernels if
the sysctl fails. Keeping this made the code rather hairy, and netstat
is already tied to the kernel ABI anyway (even when using sysctl's since
things like xinpcb contain an inpcb) so any kernels this is run against
that have the multicast routing stuff should have the sysctls.
- Don't try to dig around in the kernel linker in the netgraph PCB routine
for core dumps.
Other notes:
- sctp's PCB routine only works on live kernels, it looked rather
complicated to generate all the same stuff via KVM. Someone can always
add it later if desired though.
- Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered.
- Use sysctlbyname() everywhere rather than hardcoded mib values.
MFC after: 1 week
Approved by: re (rwatson)
o shorten explainations which are over 80 columns in console.
o group rows
o clean up and change explanations a little bit.
Obtained from: weongyo.jeong@gmail.com
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.
This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.
The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html
Summary
* IPv4 multicast socket processing is now moved out of ip_output.c
into a new module, in_mcast.c.
* The in_mcast.c module implements the IPv4 legacy any-source API in
terms of the protocol-independent source-specific API.
* Source filters are lazy allocated as the common case does not use them.
They are part of per inpcb state and are covered by the inpcb lock.
* struct ip_mreqn is now supported to allow applications to specify
multicast joins by interface index in the legacy IPv4 any-source API.
* In UDP, an incoming multicast datagram only requires that the source
port matches the 4-tuple if the socket was already bound by source port.
An unbound socket SHOULD be able to receive multicasts sent from an
ephemeral source port.
* The UDP socket multicast filter mode defaults to exclusive, that is,
sources present in the per-socket list will be blocked from delivery.
* The RFC 3678 userland functions have been added to libc: setsourcefilter,
getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
* Definitions for IGMPv3 are merged but not yet used.
* struct sockaddr_storage is now referenced from <netinet/in.h>. It
is therefore defined there if not already declared in the same way
as for the C99 types.
* The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
which are then interpreted as interface indexes) is now deprecated.
* A patch for the Rhyolite.com routed in the FreeBSD base system
is available in the -net archives. This only affects individuals
running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
* Make IPv6 detach path similar to IPv4's in code flow; functionally same.
* Bump __FreeBSD_version to 700048; see UPDATING.
This work was financially supported by another FreeBSD committer.
Obtained from: p4://bms_netdev
Submitted by: Wilbert de Graaf (original work)
Reviewed by: rwatson (locking), silence from fenner,
net@ (but with encouragement)
o Print "unknown ICMP" instead of "(null)" if we don't have a description for a icmp type.
Based on code
Submitted by: Christoph Weber-Fahr
PR: misc/112126
MFC after: 2 weeks
in FreeBSD, and originated from INRIA IPv6.
Stub out netstat reference to addr2ascii() I mistakenly introduced.
Update misleading man page sections.
Merge NetBSD's getnameinfo() AF_LINK extensions for a portable way to
print link-layer addresses given a sockaddr_dl(), minus the IEEE 1394
bits which don't map directly to our code.
Obtained from: NetBSD (getnameinfo.c)
Discussed on: current (March 2006)
sidewaysintpr(). This increases the accuracy of the per-interval
counts when they are interpreted as rates. Repeated calls to alarm(n)
give an average interval that is about 2 ticks larger than n and has
a large variance. Periodic itimers normally get the average almost
right but have similarly large variance (due to scheduling delays).
Statistics utilities should use clock_gettime() to determine the
actual interval, but it is still useful to maximize the accuracy of
the interval, especially for cases like netstat -w where counts are
displayed so the program cannot hide the inaccuracy in a rate
conversion.
potential issues where the peer does not close, potentially leaving
thousands of connections in FIN_WAIT_2. This is controlled by a new sysctl
fast_finwait2_recycle, which is disabled by default.
Reviewed by: gnn, silby.
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF. Set to BPF_D_IN to see only incoming packets on the
interface. Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface. Set to BPF_D_OUT to see only outgoing
packets on the interface. This setting is initialized to BPF_D_INOUT
by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.
- BIOCFEEDBACK sets packet feedback mode. This allows injected packets
to be fed back as input to the interface when output via the interface is
successful. When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication. This flag is initialized to
zero by default.
Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.
Reviewed by: rwatson
loaded into the system.
Change wording of comments to reflect the fact we should unconditionally
use KVM if the -M option is used to specify a core file.
Add comments to document the fact that IPv6 multicast forwarding
information display still relies on KVM for gathering information.
Without -n, we now only print a "network name" without the prefix length
under the following conditions:
1) the network address and mask matches a classful network prefix;
2) getnetbyaddr(3) returns a network name for this network address.
With -n, we unconditionally print the full unabbreviated CIDR network
prefix in the form "a.b.c.d/p". 0.0.0.0/0 is still printed as "default".
This change is in preparation for changes such as equal-cost multipath, and
to more generally assist operational deployment of FreeBSD as a modern IPv4
router. There are currently no plans to backport this change.
Discussed on: freebsd-net
including to printf(). Using uintmax_t is also robust to further
extensions in both the C language and the bitwidth of kernel counters.
Tested on: i386 amd64 ia64
with FAST_IPSEC rather than the KAME IPSEC stack.
Note that the output of "netstat -s -p ipsec" differs depending on which
stack is compiled into the kernel since they each keep different stats.
This delta also adds the "esp", "ah", and "ipcomp" protocol stats, which
are also available when the kernel is compiled with the FAST_IPSEC stack
(e.g. "netstat -s -p esp").
Submitted by: Matt Titus <titus at nttmcl dot com>
MFC after: 3 days
