To be used by the mlx5 callbacks exposed to the mlxfw module.
Linux commit:
d2ad488b0073bd1a2c3f5d2ea50a7eb632103e5d
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Enhance MCAM to allow the driver to query which access regs are
supported. For now, expose the regs needed for FW flashing.
Linux commit:
0ab87743cc8c5bcd482daf71961ed5fc45349e01
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
MCC (Management Component Control) allows to control a firmware
component update.
MCDA (Management Component Data Access) allows to read and write
a firmware component.
MCQI (Management Component Query Information) allows to query
information about firmware components.
Linux commit:
4717628938423fcba0aa8fa889e9fed4eb6a655f
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
On load_one, we now cache our capabilities registers internally, similar
to QUERY_HCA_CAP. Capabilities can later be queried using macros
introduced in this patch.
Linux commit:
71862561f3a62015a11de16d1c306481e8415c08
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Introduced registers will expose capabilities of new registers and
features related to port/management.
Driver will query MCAM and PCAM in order to avoid failing on old
firmwares with lack of support.
Linux commit:
c835ad64683bd3e2d1b31ed2cb1ff4366932edb1
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
PCAM: Ports capabilities mask register.
MCAM: Management capabilities mask register.
PCAM and MCAM registers will provide information regarding firmware
support for different features, in order to avoid cases where new driver
combined with old firmware results in syndromes (for ex. PCIe counters
before this patchset).
Linux commit:
cfdcbceaeffc669b70d904d80a2df9c86c232566
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Today mlx5 devices support two teardown modes:
1- Regular teardown
2- Force teardown
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been
scattered to memory
Linux commit:
fcd29ad17c6ff885dfae58f557e9323941e63ba2
MFC after: 3 days
Sponsored by: Mellanox Technologies
Else the SQs won't be properly released when closing rate-limited connections
leading to wrong state transitions on the SQ.
MFC after: 3 days
Sponsored by: Mellanox Technologies
When using CQE zipping, one can choose between RX hash and Checksum.
This will indicate the parameter on which a zipping session should be
stopped.
While porting the Linux code, Checksum was chosen. However, the value
of Checksum is not being used anywhere.
For the FreeBSD driver, we prefer to use the RX hash format which will
guarantee the RX hash value for all the mini CQEs.
While at it, make sure to initialize the Checksum value in the
decompressed CQE.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
After doing performance measurements, it seems like CQE zipping doesn't
have any significant benefit.
Moreover, we know that this feature is disabled by default on other
operating systems (Linux for example).
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Split the function into the mlx5e_update_stats_locked() core and make
mlx5e_update_stats_work() call the _locked helper, similar to many other
places in the kernel. This improves the code structure, making the
locking clean.
Submitted by: kib@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Instead of waiting for all jobs to be cancelled, simply close the completion
queue to prevent more completion events and let mlx5e_destroy_rq() cleanup
the remaining mbufs.
MFC after: 3 days
Sponsored by: Mellanox Technologies
The number of priorities is always 8, while the number of traffic classes
supported can vary. While at it convert the sysctl node into an array.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Instead of reading Ethernet RFC 2819 pXtoYoctets counters from
hardware which counts RX octets, count tx_stat_pXtoYoctets from
Ethernet extended counters which counts TX octets.
TX jumbo counters should be accumulated only after the PPCNT
counters were fetched from hardware with their latest value.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Avoid an infinite software firmware reset loop that may be caused by a
hardware bug by limiting the maximum number of resets.
The counter between resets is reset by request for reset, and not by a
successful reset.
The interval between two resets can be configured via sysctl:
hw.mlx5.sw_reset_timeout
which is global to all mlx5 devices in the system.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Make sure the interrupt handlers don't race with the fast unload one
code in the shutdown handler.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Temperature warning event is sent by FW to indicate high temperature
as detected by one of the sensors on the board.
Add handling of this event by writing the numbers of the alert sensors
to the kernel log.
Linux commit:
1865ea9adbfaf341c5cd5d8f7d384f19948b2fe9
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
While at it remove unused interface state bits. This also fixes and issue
during shutdown:
There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.
The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
Linux commit:
10a8d00707082955b177164d4b4e758ffcbd4017
b3cb5388499c5e219324bfe7da2e46cbad82bfcf
MFC after: 3 days
Sponsored by: Mellanox Technologies
Add support for DIM based on Linux,
with some minor adaptions specific to FreeBSD.
Linux commit
f97c3dc3c0e8d23a5c4357d182afeef4c67f5c33
MFC after: 3 days
Sponsored by: Mellanox Technologies
Drivers can now pass up numa domain information via the
mbuf numa domain field. This information is then used
by TCP syncache_socket() to associate that information
with the inpcb. The domain information is then fed back
into transmitted mbufs in ip{6}_output(). This mechanism
is nearly identical to what is done to track RSS hash values
in the inp_flowid.
Follow on changes will use this information for lacp egress
port selection, binding TCP pacers to the appropriate NUMA
domain, etc.
Reviewed by: markj, kib, slavash, bz, scottl, jtl, tuexen
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20028
This commit adds new if_alloc_domain() and if_alloc_dev() methods to
allocate ifnets. When called with a domain on a NUMA machine,
ifalloc_domain() will record the NUMA domain in the ifnet, and it will
allocate the ifnet struct from memory which is local to that NUMA
node. Similarly, if_alloc_dev() is a wrapper for if_alloc_domain
which uses a driver supplied device_t to call ifalloc_domain() with
the appropriate domain.
Note that the new if_numa_domain field fits in an alignment pad in
struct ifnet, and so does not alter the size of the structure.
Reviewed by: glebius, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19930
This allows efficient filtering at packet ingress on mlx5en.
Note that the packets are filtered (and potentially dropped) *before*
the driver has committed to (re)allocating an mbuf for the
packet. Dropped packets are treated essentially the same as an
error. Nothing is allocated, and the existing buffer is recycled. This
allows us to drop malicious packets at close to line rate with very
little CPU use.
Reviewed by: hselasky, slavash, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19063
The backpressure indication is implemented using an unlimited rate type of
mbuf send tag. When the upper layers typically the socket layer has obtained such
a tag, it can then query the destination driver queue for the current
amount of space available in the send queue.
A single mbuf send tag may be referenced multiple times and a refcount has been added
to the mlx5e_priv structure to track its usage. Because the send tag resides
in the mlx5e_channel structure, there is no need to wait for refcounts to reach
zero until the mlx4en(4) driver is detached. The channels structure is persistant
during the lifetime of the mlx5en(4) driver it belongs to and can so be accessed
without any need of synchronization.
The mlx5e_snd_tag structure was extended to contain a type field, because there are now
two different tag types which end up in the driver which need to be distinguished.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
In order to enable HW LRO, both the "hw_lro" sysctl in the mlx5en(4) config
space must be set, and the ifconfig(8) LRO capability must be set. Any other
settings will disable HW LRO.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add counter for all transmitted and received bytes. Currently only all
transmitted and received packets were counted. Fix description of RX LRO
counters while at it.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
By allocating the worst case size channel structure array
at attach time we can eliminate various NULL checks in the
fast path. And also reduce the chance for use-after-free
issues in the transmit fast path.
This change is also a requirement for implementing
backpressure support.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Writing to the debug stats variable must be locked,
else serialization will be lost which might cause
various kernel panics due to creating and destroying
sysctls out of order.
Make sure the sysctl context is initialized after freeing
the sysctl nodes, else they can be freed twice.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Inspect the ethernet compliance code to figure out actual cable type by reading
the PDDR module info register.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
This can happen when connections are short lived and leads to
a firmware error printout in dmesg, syndrome 0x51cfb0, because
the SQ is in the wrong state.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
1) Don't exceed the drivers own hardcoded TX inline limit.
The blueflame register size can be much greater than the hardcoded limit
for inlining. Make sure we don't exceed the drivers own limit, because this
also means that the maximum number of TX fragments becomes invalid and
then memory size assumptions in the TX path no longer hold up.
2) Make sure the mlx5_query_min_inline() function returns an error code.
3) Header inlining is required when using TSO.
4) Catch failure to compute inline header size for TSO.
5) Add support for UDP when computing inline header size.
6) Fix for inlining issues with regards to DSCP.
Make sure we inline 4 bytes beyond the ethernet and/or
VLAN header to workaround a hardware bug extracting
the DSCP field from the IPv4/v6 header.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
The hardware queues are deep enough currently and using the DRBR and associated
callbacks only leads to more task switching in the TX path. The is also a race
setting the queue_state which can lead to hung TX rings.
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add support for setting the bandwidth limit as a ratio rather than in bits per
second. The ratio must be an integer number between 1 and 100 inclusivly.
Implement the needed firmware commands and SYSCTLs through mlx5en(4).
Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies
