Decode the last argument to ioctl() as a pointer rather than an int.
Eventually this could use 'int' for the _IOWINT() case and pointers for
all others.
The last argument to sendto() is a socklen_t value, not a pointer.
Previously, the offset in a system call description specified the
array index of the start of a system call argument. For most system
call arguments this was the same as the index of the argument in the
function signature. 64-bit arguments (off_t and id_t values) passed
on 32-bit platforms use two slots in the array however. This was
handled by adding (QUAD_SLOTS - 1) to the slot indicies of any
subsequent arguments after a 64-bit argument (though written as ("{
Quad, 1 }, { Int, 1 + QUAD_SLOTS }" rather than "{ Quad, 1 }, { Int, 2
+ QUAD_SLOTS - 1 }"). If a system call contained multiple 64-bit
arguments (such as posix_fadvise()), then additional arguments would
need to use 'QUAD_SLOTS * 2' but remember to subtract 2 from the
initial number, etc. In addition, 32-bit powerpc requires 64-bit
arguments to be 64-bit aligned, so if the effective index in the array
of a 64-bit argument is odd, it needs QUAD_ALIGN added to the current
and any subsequent slots. However, if the effective index in the
array of a 64-bit argument was even, QUAD_ALIGN was omitted.
This approach was messy and error prone. This commit replaces it with
automated pre-processing of the system call table to do fixups for
64-bit argument offsets. The offset in a system call description now
indicates the index of an argument in the associated function call's
signature. A fixup function is run against each decoded system call
description during startup on 32-bit platforms. The fixup function
maintains an 'offset' value which holds an offset to be added to each
remaining system call argument's index. Initially offset is 0. When
a 64-bit system call argument is encountered, the offset is first
aligned to a 64-bit boundary (only on powerpc) and then incremented to
account for the second argument slot used by the argument. This
modified 'offset' is then applied to any remaining arguments. This
approach does require a few things that were not previously required:
1) Each system call description must now list arguments in ascending
order (existing ones all do) without using duplicate slots in the
register array. A new assert() should catch any future
descriptions which violate this rule.
2) A system call description is still permitted to omit arguments
(though none currently do), but if the call accepts 64-bit
arguments those cannot be omitted or incorrect results will be
displated on 32-bit systems.
Tested on: amd64 and i386
Prefer ${SRCTOP}/foo over ${.CURDIR}/../../foo and ${SRCTOP}/usr.bin/foo
over ${.CURDIR}/../foo for paths in Makefiles.
Differential Revision: https://reviews.freebsd.org/D9932
Sponsored by: Netflix
Silence on: arch@ (twice)
Avoid always using an O(n^2) loop over known syscall structures with
strcmp() on each system call. Instead, use a per-ABI cache indexed by
the system call number. The first 1024 system calls (which should cover
all of the normal system calls in currently-supported ABIs) use a flat array
indexed by the system call number to find system call structure. For other
system calls, a linked list of structures storing an integer to structure
mapping is stored in the ABI. The linked list isn't very smart, but it
should only be used by buggy applications invoking unknown system calls.
This also fixes handling of unknown system calls which currently trigger
a NULL pointer dereference.
Reviewed by: kib
MFC after: 2 weeks
Restructure this script so that it generates a header of tables instead
of a source file. The tables are included in a flags.c source file which
provides functions to decode various system call arguments.
For functions that decode an enumeration, the function returns a pointer
to a string for known values and NULL for unknown values.
For functions that do more complex decoding (typically of a bitmask), the
function accepts a pointer to a FILE object (open_memstream() can be used
as a string builder) to which decoded values are written. If the
function operates on a bitmask, the function returns true if any bits
were decoded or false if the entire value was valid. Additionally, the
third argument accepts a pointer to a value to which any undecoded bits
are stored. This pointer can be NULL if the caller doesn't care about
remaining bits.
Convert kdump over to using decoder functions from libsysdecode instead of
mksubr. truss also uses decoders from libsysdecode instead of private
lookup tables, though lookup tables for objects not decoded by kdump remain
in truss for now. Eventually most of these tables should move into
libsysdecode as the automated table generation approach from mksubr is
less stale than the static tables in truss.
Some changes have been made to truss and kdump output:
- The flags passed to open() are now properly decoded in that one of
O_RDONLY, O_RDWR, O_WRONLY, or O_EXEC is always included in a decoded
mask.
- Optional arguments to open(), openat(), and fcntl() are only printed
in kdump if they exist (e.g. the mode is only printed for open() if
O_CREAT is set in the flags).
- Print argument to F_GETLK/SETLK/SETLKW in kdump as a pointer, not int.
- Include all procctl() commands.
- Correctly decode pipe2() flags in truss by not assuming full
open()-like flags with O_RDONLY, etc.
- Decode file flags passed to *chflags() as file flags (UF_* and SF_*)
rather than as a file mode.
- Fix decoding of quotactl() commands by splitting out the two command
components instead of assuming the raw command value matches the
primary command component.
In addition, truss and kdump now build without triggering any warnings.
All of the sysdecode manpages now include the required headers in the
synopsis.
Reviewed by: kib (several older versions), wblock (manpages)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7847
Now that we've switched over to using the vDSO on CloudABI, it becomes a
lot easier for us to phase out old features. System call numbering is no
longer something that's part of the ABI. It's fully based on names. As
long as the numbering used by the kernel and the vDSO is consistent
(which it always is), it's all right.
Let's put this to the test by removing a system call (thread_tcb_set())
that's already unused for quite some time now, but was only left intact
to serve as a placeholder. Sync in the new system call table that uses
alphabetic sorting of system calls.
Obtained from: https://github.com/NuxiNL/cloudabi
trussinfo->curthread must be initialized before calling enter_syscall(),
it is used by t->proc->abi->fetch_args().
Without that truss is segfaulting and the attached program also crash.
Submitted by: Nikita Kozlov (nikita@gandi.net)
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7399
The type definitions and constants that were used by COMPAT_CLOUDABI64
are a literal copy of some headers stored inside of CloudABI's C
library, cloudlibc. What is annoying is that we can't make use of
cloudlibc's system call list, as the format is completely different and
doesn't provide enough information. It had to be synced in manually.
We recently decided to solve this (and some other problems) by moving
the ABI definitions into a separate file:
https://github.com/NuxiNL/cloudabi/blob/master/cloudabi.txt
This file is processed by a pile of Python scripts to generate the
header files like before, documentation (markdown), but in our case more
importantly: a FreeBSD system call table.
This change discards the old files in sys/contrib/cloudabi and replaces
them by the latest copies, which requires some minor changes here and
there. Because cloudabi.txt also enforces consistent names of the system
call arguments, we have to patch up a small number of system call
implementations to use the new argument names.
The new header files can also be included directly in FreeBSD kernel
space without needing any includes/defines, so we can now remove
cloudabi_syscalldefs.h and cloudabi64_syscalldefs.h. Patch up the
sources to include the definitions directly from sys/contrib/cloudabi
instead.
- truss can now log the system call invoked by a thread during a
voluntary process exit. No return value is logged, but the value passed
to exit() is included in the trace output. Arguments passed to thread
exit system calls such as thr_exit() are not logged as voluntary thread
exits cannot be distinguished from involuntary thread exits during a
system call.
- New events are now reported for thread births and exits similar to the
recently added events for new child processes when following forks.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5561
Add two new functions, sysdecode_abi_to_freebsd_errno() and
sysdecode_freebsd_to_abi_errno(), which convert errno values between
the native FreeBSD ABI and other supported ABIs. Note that the
mappings are not necessarily perfect meaning in some cases multiple
errors in one ABI might map to a single error in another ABI. In that
case, the reverse mapping will return one of the errors that maps, but
which error is non-deterministic.
Change truss to always report the raw error value to the user but
use libsysdecode to map it to a native errno value that can be used
with strerror() to generate a description. Previously truss reported
the "converted" error value. Now the user will always see the exact
error value that the application sees.
Change kdump to report the truly raw error value to the user. Previously
kdump would report the absolute value of the raw error value (so for
Linux binaries it didn't output the FreeBSD error value, but the positive
value of the Linux error). Now it reports the real (i.e. negative) error
value for Linux binaries. Also, use libsysdecode to convert the native
FreeBSD error reported in the ktrace record to the raw error used by the
ABI. This means that the Linux ABI can now be handled directly in
ktrsysret() and removes the need for linux_ktrsysret().
Reviewed by: bdrewery, kib
Helpful notes: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5314
- Consolidate duplicate code for printing the metadata at the start of
each line into a shared function.
- Add an -H option which will log the thread ID of the relevant thread
for each event.
While here, remove some extraneous calls to clock_gettime() in
print_syscall() and print_syscall_ret(). The caller of print_syscall_ret()
always updates the current thread's "after" time before it is called.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D5363
instead of passing some of that state as arguments to print_syscall() and
print_syscallret(). This just makes the calls of these functions shorter
and easier to read.
A new sysdecode_syscallname() function accepts a system call code and
returns a string of the corresponding name (or NULL if the code is
unknown). To support different process ABIs, the new function accepts a
value from a new sysdecode_abi enum as its first argument to select the
ABI in use. Current ABIs supported include FREEBSD (native binaries),
FREEBSD32, LINUX, LINUX32, and CLOUDABI64. Note that not all ABIs are
supported by all platforms. In general, a given ABI is only supported
if a platform can execute binaries for that ABI.
To simplify the implementation, libsysdecode's build reuses the
existing pre-generated files from the kernel source tree rather than
duplicating new copies of said files during the build.
kdump(1) and truss(1) now use these functions to map system call
identifiers to names. For kdump(1), a new 'syscallname()' function
consolidates duplicated code from ktrsyscall() and ktrsyscallret().
The Linux ABI no longer requires custom handling for ktrsyscall() and
linux_ktrsyscall() has been removed as a result.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4823
sysdecode_ioctlname() function. This function matches the behavior
of the truss variant in that it returns a pointer to a string description
for known ioctls. The caller is responsible for displaying unknown
ioctl requests. For kdump this meant moving the logic to handle unknown
ioctl requests out of the generated function and into an ioctlname()
function in kdump.c instead.
Differential Revision: https://reviews.freebsd.org/D4610
system call information such as system call arguments. Initially this
will consist of pulling duplicated code out of truss and kdump though it
may prove useful for other utilities in the future.
This commit moves the shared utrace(2) record parser out of kdump into
the library and updates kdump and truss to use it. One difference from
the previous version is that the library version treats unknown events
that start with the "RTLD" signature as unknown events. This simplifies
the interface and allows the consumer to decide how to handle all
non-recognized events. Instead, this function only generates a string
description for known malloc() and RTLD records.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D4537
This change copies over amd64-cloudabi64.c to aarch64-cloudabi.c and
adjusts it to fetch the proper registers on aarch64. To reduce the
amount of shared code, the errno conversion function is moved into a
separate source file.
Reviewed by: jhb, andrew
Differential Revision: https://reviews.freebsd.org/D4023
This is to make the Makefile more easily extendable for new ABIs.
This also makes several other subtle changes:
- The build now is given a list of ABIs to use based on the MACHINE_ARCH or
MACHINE_CPUARCH. These ABIs have a related path in sys/ that is used
to generate their syscalls. For each ABI to build check for a
ABI.c, MACHINE_ARCH-ABI.c, or a MACHINE_CPUARCH-ABI.c. This matches
the old behavior needed for archs such as powerpc* and mips*.
- The ABI source file selection allows for simpler assignment of common
ABIs such as "fbsd32" from sys/compat/freebsd32, or cloudabi64.
- Expand 'fbsd' to 'freebsd' everywhere for consistency.
- Split out the powerpc-fbsd.c file into a powerpc64-freebsd32.c to be more
like the amd64-freebsd32.c file and to more easily allow the auto-generation
of ABI handling to work.
- Rename 'syscalls.h' to 'fbsd_syscalls.h' to lessen the ambiguity and
avoid confusion with syscall.h (such as in r288997).
- For non-native syscall header files, they are now renamed to be
ABI_syscalls.h, where ABI is what ABI the Makefile is building.
- Remove all of the makesyscalls config files. The "native" one being
name i386.conf was a long outstanding bug. They were all the same
except for the data they generated, so now it is just auto-generated
as a build artifact.
- The syscalls array is now fixed to be static in the syscalls header to
remove the compiler warning about non-extern. This was worked around
in the aarch64-fbsd.c file but not the others.
- All syscall table names are now just 'syscallnames' since they don't
need to be different as they are all static in their own ABI files. The
alternative is to name them ABI_syscallnames which does not seem
necessary.
Reviewed by: ed, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D3851
Without this, the signals are shown seemingly randomly in the output before
the final summary is shown. This is especially noticeable when there is
not much output from the application being traced.
Discussed with: jhb
Relnotes: yes
CloudABI has approximately 50 system calls that do not depend on the
pointer size of the system. As the ABI is pretty compact, it takes
little effort to each truss(8) the formatting rules for these system
calls. Start off by formatting pointer size independent system calls.
Changes:
- Make it possible to include the CloudABI system call definitions in
FreeBSD userspace builds. Add ${root}/sys to the truss(8) Makefile so
we can pull in <compat/cloudabi/cloudabi_syscalldefs.h>.
- Refactoring: patch up amd64-cloudabi64.c to use the CLOUDABI_*
constants instead of rolling our own table.
- Add table entries for all of the system calls.
- Add new generic formatting types (UInt, IntArray) that we'll be using
to format unsigned integers and arrays of integers.
- Add CloudABI specific formatting types.
Approved by: jhb
Differential Revision: https://reviews.freebsd.org/D3836
This uses the kdump(1) utrace support code directly until a common library
is created.
This allows malloc(3) tracing with MALLOC_CONF=utrace:true and rtld tracing
with LD_UTRACE=1. Unknown utrace(2) data is just printed as hex.
PR: 43819 [inspired by]
Reviewed by: jhb
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3819