Commit Graph

134 Commits

Author SHA1 Message Date
Alfred Perlstein
e649887b1e Make funsetown() take a 'struct sigio **' so that the locking can
be done internally.

Ensure that no one can fsetown() to a dying process/pgrp.  We need
to check the process for P_WEXIT to see if it's exiting.  Process
groups are already safe because there is no such thing as a pgrp
zombie, therefore the proctree lock completely protects the pgrp
from having sigio structures associated with it after it runs
funsetownlst.

Add sigio lock to witness list under proctree and allproc, but over
proc and pgrp.

Seigo Tanimura helped with this.
2002-05-06 19:31:28 +00:00
Seigo Tanimura
6041fa0a60 As malloc(9) and free(9) are now Giant-free, remove the Giant lock
across malloc(9) and free(9) of a pgrp or a session.
2002-05-03 07:46:59 +00:00
Seigo Tanimura
c8d8a686e4 Fix the lock order reversal between the sigio lock and a process/pgrp lock in
funsetownlst() by locking the sigio lock across funsetownlst().
2002-05-03 05:32:25 +00:00
Seigo Tanimura
ce00aebe22 Free(9) should be Giant-free.
Suggested by:	jhb
2002-04-24 09:59:18 +00:00
Seigo Tanimura
1c2451c24d Push down Giant for setpgid(), setsid() and aio_daemon(). Giant protects only
malloc(9) and free(9).
2002-04-20 12:02:52 +00:00
John Baldwin
f089b57070 - Merge the pgrpsess_lock and proctree_lock sx locks into one proctree_lock
sx lock.  Trying to get the lock order between these locks was getting
  too complicated as the locking in wait1() was being fixed.
- leavepgrp() now requires an exclusive lock of proctree_lock to be held
  when it is called.
- fixjobc() no longer gets a shared lock of proctree_lock now that it
  requires an xlock be held by the caller.
- Locking notes in sys/proc.h are adjusted to note that everything that
  used to be protected by the pgrpsess_lock is now protected by the
  proctree_lock.
2002-04-16 17:03:05 +00:00
John Baldwin
65c9b4303b - Change fill_kinfo_proc() to require that the process is locked when it
is called.
- Change sysctl_out_proc() to require that the process is locked when it
  is called and to drop the lock before it returns.  If this proves too
  complex we can change sysctl_out_proc() to simply acquire the lock at
  the very end and have the calling code drop the lock right after it
  returns.
- Lock the process we are going to export before the p_cansee() in the
  loop in sysctl_kern_proc() and hold the lock until we call
  sysctl_out_proc().
- Don't call p_cansee() on the process about to be exported twice in
  the aforementioned loop.
2002-04-09 20:10:46 +00:00
Jake Burkholder
a30d7c60f6 Use CTASSERT rather than a runtime check to detect kinfo_proc size changes.
Remove the ugly yuck code to busy wait for 20 seconds.
2002-04-06 08:13:52 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Matthew Dillon
182da8209d Stage-2 commit of the critical*() code. This re-inlines cpu_critical_enter()
and cpu_critical_exit() and moves associated critical prototypes into their
own header file, <arch>/<arch>/critical.h, which is only included by the
three MI source files that need it.

Backout and re-apply improperly comitted syntactical cleanups made to files
that were still under active development.  Backout improperly comitted program
structure changes that moved localized declarations to the top of two
procedures.  Partially re-apply one of the program structure changes to
move 'mask' into an intermediate block rather then in three separate
sub-blocks to make the code more readable.  Re-integrate bug fixes that Jake
made to the sparc64 code.

Note: In general, developers should not gratuitously move declarations out
of sub-blocks.  They are where they are for reasons of structure, grouping,
readability, compiler-localizability, and to avoid developer-introduced bugs
similar to several found in recent years in the VFS and VM code.

Reviewed by:	jake
2002-04-01 23:51:23 +00:00
Alfred Perlstein
7b11fea64f Close some holes with p->p_args by NULL'ing out the p->p_args pointer
while holding the proc lock, and by holding the pargs structure when
accessing it from outside of the owner.

Submitted by: Jonathan Mini <mini@haikugeek.com>
2002-03-31 10:33:12 +00:00
Alfred Perlstein
c1508b28c6 To remove nested include of sys/lock.h and sys/mutex.h from sys/proc.h
make the pargs_* functions into non-inlines in kern/kern_proc.c.

Requested by: bde
2002-03-28 18:12:27 +00:00
Alfred Perlstein
8899023f66 Make the reference counting of 'struct pargs' SMP safe.
There is still some locations where the PROC lock should be held
in order to prevent inconsistent views from outside (like the
proc->p_fd fix for kern/vfs_syscalls.c:checkdirs()) that can be
fixed later.

Submitted by: Jonathan Mini <mini@haikugeek.com>
2002-03-27 21:36:18 +00:00
Jeff Roberson
f22a4b62f5 Add a new mtx_init option "MTX_DUPOK" which allows duplicate acquires of locks
with this flag.  Remove the dup_list and dup_ok code from subr_witness.  Now
we just check for the flag instead of doing string compares.

Also, switch the process lock, process group lock, and uma per cpu locks over
to this interface.  The original mechanism did not work well for uma because
per cpu lock names are unique to each zone.

Approved by:	jhb
2002-03-27 09:23:41 +00:00
Matthew Dillon
e6bbfd402d oops, forgot to commit this. td->td_savecrit = 0 replaced by API
call cpu_thread_link().
2002-03-27 08:26:37 +00:00
Jake Burkholder
f2a79bb9b4 Make this compile.
Pointy hat to:	dillon
2002-03-27 06:44:32 +00:00
Bruce Evans
70f52b4845 Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-24 05:09:11 +00:00
Jeff Roberson
c897b81311 Remove references to vm_zone.h and switch over to the new uma API.
Also, remove maxsockets.  If you look carefully you'll notice that the old
zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
Alfred Perlstein
4d77a549fe Remove __P. 2002-03-19 21:25:46 +00:00
Seigo Tanimura
f591779bb5 Lock struct pgrp, session and sigio.
New locks are:

- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.

Please refer to sys/proc.h for the coverage of these locks.

Changes on the pgrp/session interface:

- pgfind() needs the pgrpsess_lock held.

- The caller of enterpgrp() is responsible to allocate a new pgrp and
  session.

- Call enterthispgrp() in order to enter an existing pgrp.

- pgsignal() requires a pgrp lock held.

Reviewed by:	jhb, alfred
Tested on:	cvsup.jp.FreeBSD.org
		(which is a quad-CPU machine running -current)
2002-02-23 11:12:57 +00:00
Poul-Henning Kamp
1cbb9c3b03 Convert p->p_runtime and PCPU(switchtime) to bintime format. 2002-02-22 13:32:01 +00:00
Julian Elischer
fd21c2b51c Oops, used wrong error value for unimplemented syscalls. 2002-02-20 22:27:09 +00:00
Julian Elischer
c28841c1da Add stub syscalls and definitions for KSE calls.
"Book'em Danno"
2002-02-19 02:40:31 +00:00
Alan Cox
96347d1e6d The previous commit included a change to fill_kinfo_proc() that results
in a NULL pointer dereference.  Repair this mistake.
2002-02-12 04:21:28 +00:00
Julian Elischer
2c1007663f In a threaded world, differnt priorirites become properties of
different entities.  Make it so.

Reviewed by:	jhb@freebsd.org (john baldwin)
2002-02-11 20:37:54 +00:00
Peter Wemm
de9ac44a24 Fix a fatal trap when using ksched_setscheduler() (eg: mozilla, netscape
etc) which use:  td->td_last_kse->ke_flags |= KEF_NEEDRESCHED;
2002-02-08 02:56:10 +00:00
Julian Elischer
045e854101 remove superfluous blank line 2002-02-08 01:38:32 +00:00
Peter Wemm
2b8a08af6b Fix a couple of style bugs introduced (or touched by) previous commit. 2002-02-07 23:06:26 +00:00
Julian Elischer
079b7badea Pre-KSE/M3 commit.
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.

Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
2002-02-07 20:58:47 +00:00
John Baldwin
b8e6bf1ed6 Fix a bug where the mutex name wasn't always displayed for processes in
SMTX in utils such as ps and top.  The KI_CTTY flag was assigned to
kinfo_proc->ki_kiflag rather than or'd into the flag, thus clobbering
any flags set earlier, including KI_MTXBLOCK.

Prodding by:	peter
2002-01-05 17:18:59 +00:00
John Baldwin
00f13cb353 As a followup to the previous fixes to inferior, revert some of the
changes in 1.80 that were needed for locking that are no longer needed now
that a lock is simply asserted.

Submitted by:	bde
2001-11-13 16:55:54 +00:00
John Baldwin
5b29d6e906 Clean up breakage in inferior() I introduced in 1.92 of kern_proc.c:
- Restore inferior() to being iterative rather than recursive.
- Assert that the proctree_lock is held in inferior() and change the one
  caller to get a shared lock of it.  This also ensures that we hold the
  lock after performing the check so the check can't be made invalid out
  from under us after the check but before we act on it.

Requested by:	bde
2001-11-12 18:56:49 +00:00
Robert Watson
8a7d8cc675 - Combine kern.ps_showallprocs and kern.ipc.showallsockets into
a single kern.security.seeotheruids_permitted, describes as:
  "Unprivileged processes may see subjects/objects with different real uid"
  NOTE: kern.ps_showallprocs exists in -STABLE, and therefore there is
  an API change.  kern.ipc.showallsockets does not.
- Check kern.security.seeotheruids_permitted in cr_cansee().
- Replace visibility calls to socheckuid() with cr_cansee() (retain
  the change to socheckuid() in ipfw, where it is used for rule-matching).
- Remove prison_unpcb() and make use of cr_cansee() against the UNIX
  domain socket credential instead of comparing root vnodes for the
  UDS and the process.  This allows multiple jails to share the same
  chroot() and not see each others UNIX domain sockets.
- Remove unused socheckproc().

Now that cr_cansee() is used universally for socket visibility, a variety
of policies are more consistently enforced, including uid-based
restrictions and jail-based restrictions.  This also better-supports
the introduction of additional MAC models.

Reviewed by:	ps, billf
Obtained from:	TrustedBSD Project
2001-10-09 21:40:30 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Peter Wemm
e414d9aad7 Add on UPAGES to ki_rssize since it is there as result of the process
and can be swapped out with the process.
2001-09-10 07:29:32 +00:00
Peter Wemm
0ecd57ad0b Fix part of another problem that bde pointed out. This is different
to what bde suggested though.
2001-08-16 23:43:24 +00:00
Peter Wemm
5a66a2532b Remove redundant null-termination. The buffer is already explicitly
zeroed, and we intentionally leave -1 on the strncpy length to leave
the original \0.

Submitted by: bde
2001-08-16 20:18:43 +00:00
Peter Wemm
77330eeba7 Use the backwards compatability mechanisms so that ps/top etc dont have
unnecessary breakage.

While here, use explicit sizes for the string fields so that we dont
have unintentional changes again in the future when key tunables change.

This still is not quite right, but a june userland is happy with
a -current kernel with these tweaks.
2001-08-16 08:41:15 +00:00
Robert Watson
a0f75161f9 o Replace calls to p_can(..., P_CAN_xxx) with calls to p_canxxx().
The p_can(...) construct was a premature (and, it turns out,
  awkward) abstraction.  The individual calls to p_canxxx() better
  reflect differences between the inter-process authorization checks,
  such as differing checks based on the type of signal.  This has
  a side effect of improving code readability.
o Replace direct credential authorization checks in ktrace() with
  invocation of p_candebug(), while maintaining the special case
  check of KTR_ROOT.  This allows ktrace() to "play more nicely"
  with new mandatory access control schemes, as well as making its
  authorization checks consistent with other "debugging class"
  checks.
o Eliminate "privused" construct for p_can*() calls which allowed the
  caller to determine if privilege was required for successful
  evaluation of the access control check.  This primitive is currently
  unused, and as such, serves only to complicate the API.

Approved by:	({procfs,linprocfs} changes) des
Obtained from:	TrustedBSD Project
2001-07-05 17:10:46 +00:00
John Baldwin
fbd26f7594 Fix some lock order reversals where we called free() while holding a proc
lock.  We now use temporary variables to save the process argument pointer
and just update the pointer while holding the lock.  We then perform the
free on the cached pointer after releasing the lock.
2001-06-20 23:10:06 +00:00
Robert Watson
b1fc0ec1a7 o Merge contents of struct pcred into struct ucred. Specifically, add the
real uid, saved uid, real gid, and saved gid to ucred, as well as the
  pcred->pc_uidinfo, which was associated with the real uid, only rename
  it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
  corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
  original macro that pointed.
  p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
  p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
  cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
  cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
  we figure out locking and optimizations; generally speaking, this
  means moving to a structure like this:
        newcred = crdup(oldcred);
        ...
        p->p_ucred = newcred;
        crfree(oldcred);
  It's not race-free, but better than nothing.  There are also races
  in sys_process.c, all inter-process authorization, fork, exec, and
  exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
  remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
  use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
  pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
  allocation.
o Clean up ktrcanset() to take into account changes, and move to using
  suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
  calls to better document current behavior.  In a couple of places,
  current behavior is a little questionable and we need to check
  POSIX.1 to make sure it's "right".  More commenting work still
  remains to be done.
o Update credential management calls, such as crfree(), to take into
  account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
      change_euid()
      change_egid()
      change_ruid()
      change_rgid()
      change_svuid()
      change_svgid()
  In each case, the call now acts on a credential not a process, and as
  such no longer requires more complicated process locking/etc.  They
  now assume the caller will do any necessary allocation of an
  exclusive credential reference.  Each is commented to document its
  reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
  and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
  questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
  processes and pcreds.  Note that this authorization, as well as
  CANSIGIO(), needs to be updated to use the p_cansignal() and
  p_cansched() centralized authorization routines, as they currently
  do not take into account some desirable restrictions that are handled
  by the centralized routines, as well as being inconsistent with other
  similar authorization instances.
o Update libkvm to take these changes into account.

Obtained from:	TrustedBSD Project
Reviewed by:	green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
John Baldwin
33a9ed9d0e Change the pfind() and zpfind() functions to lock the process that they
find before releasing the allproc lock and returning.

Reviewed by:	-smp, dfr, jake
2001-04-24 00:51:53 +00:00
John Baldwin
1005a129e5 Convert the allproc and proctree locks from lockmgr locks to sx locks. 2001-03-28 11:52:56 +00:00
David Malone
d1cadeb02a Don't leak the memory we've just malloced if we can't find the
process we're looking for. (I don't think this can currently
happen, but it depends how the function is called).

PR:		25932
Submitted by:	David Xu <davidx@viasoft.com.cn>
2001-03-27 20:49:51 +00:00
Kirk McKusick
393d77ffad Bitch more loudly when someone botches changes to kinfo_proc
in the hopes that they will actually *read* the comment above
it and *follow* the instructions so as to cause all the rest
of us less a lot less grief.
2001-03-07 06:52:12 +00:00
John Baldwin
15e9ec5153 Proc locking including using proc lock in place of proctree where
appropriate and locking processes while we signal them.
2001-03-07 03:28:50 +00:00
Robert Watson
91421ba234 o Move per-process jail pointer (p->pr_prison) to inside of the subject
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
  pr_free(), invoked by the similarly named credential reference
  management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
  of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
  rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
  flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
  mutex use.

Notes:

o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
  credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
  required to protect the reference count plus some fields in the
  structure.

Reviewed by:	freebsd-arch
Obtained from:	TrustedBSD Project
2001-02-21 06:39:57 +00:00
Jake Burkholder
d5a08a6065 Implement a unified run queue and adjust priority levels accordingly.
- All processes go into the same array of queues, with different
  scheduling classes using different portions of the array.  This
  allows user processes to have their priorities propogated up into
  interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
  32.  We used to have 4 separate arrays of 32 queues each, so this
  may not be optimal.  The new run queue code was written with this
  in mind; changing the number of run queues only requires changing
  constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter.  This
  is intended to be used to create per-cpu run queues.  Implement
  wrappers for compatibility with the old interface which pass in
  the global run queue structure.
- Group the priority level, user priority, native priority (before
  propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
  symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
  This was used to detect when a process' priority had lowered and
  it should yield.  We now effectively yield on every interrupt.
- Activate propogate_priority().  It should now have the desired
  effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
  idle loop.  It interfered with propogate_priority() because
  the idle process needed to do a non-blocking acquire of Giant
  and then other processes would try to propogate their priority
  onto it.  The idle process should not do anything except idle.
  vm_page_zero_idle() will return in the form of an idle priority
  kernel thread which is woken up at apprioriate times by the vm
  system.
- Update struct kinfo_proc to the new priority interface.  Deliberately
  change its size by adjusting the spare fields.  It remained the same
  size, but the layout has changed, so userland processes that use it
  would parse the data incorrectly.  The size constraint should really
  be changed to an arbitrary version number.  Also add a debug.sizeof
  sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
John Baldwin
1aa97cdea7 Work around some sizeof(long) != sizeof(int) bogons. 2001-02-09 19:02:39 +00:00