- Properly initialize and destroy system_taskq.
- Add a dummy implementation of taskq_create_proc().
Note: We do not currently use system_taskq in ZFS so this is mostly a
no-op at this time. Proper system_taskq initialization is required
by newer ZFS code.
Ok'ed by: pjd
MFC after: 2 weeks
o) Use <machine/asm.h> macros for register-width, etc., rather than doing it
by hand in a few more assembly files.
o) Reduce diffs between various bits of TLB refill code in exception.S and
between interrupt processing code.
o) Use PTR_* to operate on registers that are pointers (e.g. sp).
o) Add and use a macro, CLEAR_PTE_SWBITS rather than using the
mysteriously-named WIRED_SHIFT to select bits to truncate when loading PTEs.
o) Don't doubly disable interrupts by moving zero to the status register,
especially since that has the nasty side-effect of taking us out of 64-bit
mode.
o) Use CLEAR_STATUS to disable interrupts the first time.
o) Keep SR_PX set as well as SR_[KSU]X when doing exception processing. This
is the bit that determines whether 64-bit operations are allowed.
o) Don't enable interrupts until configure_final(), like most other ports.
attributes for XKPHYS.
o) Make coprocessor 0 accessor function macros for register+selector registers
take the full name so that e.g. (as done in this commit), prid selector 1
can be written through mips_wr_ebase() rather than mips_wr_prid1().
o) Allow for sign extension of 32-bit segment addresses.
o) Remove an unused MIPS-I register number.
address space for an address as aligned by the new pmap_align_tlb()
function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
kmem_alloc_nofault() but allows the caller to specify which find-space
option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
an odd boundary within the TLB, so that they are suitable for insertion as
wired entries and do not have to share a TLB entry with another mapping,
assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
alignment of the kstack address.
Reviewed by: [1] alc
X-MFC-after: Making sure alc has not come up with a better interface.
when an NFSv4 server reboots, by doing two things.
1 - Make the function that acquires a stateid for I/O operations
block until recovery is complete, so that it doesn't acquire
out of date stateids.
2 - Only allow a recovery once every 1/2 of a lease duration, since
the NFSv4 server must provide a recovery grace period of at
least a lease duration. This should avoid recoveries caused
by an out of date stateid that was acquired for an I/O op.
just before a recovery cycle started.
MFC after: 1 week
Simplify the presented declaration of struct sigaction, noting the
caveat in the text. Real layout of the structure and exposed
implementation namespace only obfuscates the usage.
Submitted by: bde
MFC after: 3 days
Two pathnames refer to the same directory entry iff the directories match
and the final components' names match.
Example: (assuming file1 is an existing file)
ln -f file1 file1
This now fails while leaving file1 intact. It used to delete file1 and then
complain it cannot be linked because it is gone.
With -i, this error is detected before the question is asked.
MFC after: 2 weeks
that page only makes sense if the advice is MADV_WILLNEED. In that case,
the intention is to activate the page, so discouraging the page daemon
from reclaiming the page makes sense. In contrast, in the other cases,
MADV_DONTNEED and MADV_FREE, it makes no sense whatsoever to discourage
the page daemon from reclaiming the page by setting PG_REFERENCED.
Wrap a nearby line.
Discussed with: kib
MFC after: 3 weeks
sleeping on that page is nonsensical. Doing so reduces the likelihood
that the page daemon will reclaim the page before the thread waiting in
vm_object_backing_scan() is reawakened. However, it does not guarantee
that the page is not reclaimed, so vm_object_backing_scan() restarts
after reawakening. More importantly, this muddles the meaning of
PG_REFERENCED. There is no reason to believe that the caller of
vm_object_backing_scan() is going to use (i.e., access) the contents of
the page. There is especially no reason to believe that an access is
more likely because vm_object_backing_scan() had to sleep on the page.
Discussed with: kib
MFC after: 3 weeks
either redundant or harmful, depending on the caller. For example, when
called by vm_fault(), it is redundant. However, when called by
vm_thread_swapin(), it is harmful. Specifically, if the thread is later
swapped out, having PG_REFERENCED set on its stack pages leads the page
daemon to reactivate these stack pages and delay their reclamation.
Reviewed by: kib
MFC after: 3 weeks
POSIX permits but does not require checking access on the current and parent
directories.
Because various programs do not like it if getcwd(3) fails, it seems best
to avoid checking access as much as possible. There are various reports in
GNATS about this (search for getcwd).
Our getcwd(3) implementation first queries the kernel for the pathname
directly, which does not check any permissions but sometimes fails, and then
falls back to reading all parent directories for the names.
PR: standards/44425
MFC after: 2 weeks
Unset PWD if it is incorrect and no value for it can be determined.
This preserves the logical current directory across shell invocations.
Example (assuming /home is a symlink):
$ cd
$ pwd
/home/foo
$ sh
$ pwd
/home/foo
Formerly the second pwd would show the physical path (symlinks resolved).
o) Mask off PAGE_MASK bits in pmap_update_page, etc., rather than modifying the
badvaddr in trapframe. Some nearby interfaces already did this.
o) Make PTEs "unsigned int" for now, not "unsigned long" -- we are only ready
for them to be 32-bit on 64-bit platforms.
o) Rather than using pmap_segmap and calculating the offset into the page table
by hand in trap.c, use pmap_pte().
o) Remove unused quad_syscall variable in trap.c.
o) Log things for illegal instructions like we do for bad page faults.
o) Various cast cleanups related to how to print registers.
o) When logging page faults, show the page table information not just for the
program counter, but for the fault address.
o) Modify support.S to use ABI-neutral macros for operating on pointers.
o) Consistently use CALLFRAME_SIZ rather than STAND_FRAME_SIZE, etc.
o) Remove unused insque/remque functions.
o) Remove some coprocessor 0 accessor functions implemented in assembly that
are unused and have inline assembly counterparts.
o) Remove NBPG, PGOFSET and PGSHIFT. Use the standard names.
o) Remove some unused macros and move things from param.h to vmparam.h that
belong in the latter. (Actually, all of the kernel segment values, virtual
addresses, etc., belong in one place, but this is a step in the right
direction.)
same time.
o) Remove some unused trivial uart functions from octeon_machdep now that the
uart part is fully working and they are unused.
o) Use __func__ instead of __FUNCTION__.
o) Use intr_*() instead of other routines that do the same thing.
o) Remove some duplicate printfs from the Octeon port, as well as duplicate
setting of Maxmem.
o) Use the right frequency divider on Octeon.
o) Use PCPU_GET(cpuid) consistently to get the cpuid of the running core.
o) Remove some unused macros in the Octeon port.
o) Use mips_sync() around use of the global dpcpu, whose value may not be
visible to APs at first.
o) When loading the first thread's stack, use macros to make the code correct
for n64 as well.
o) Remove stub, do-nothing FAU init/enable/disable functions from the RGMX
driver.
that turned out to be unrelated, and the rest was, as pointed out by Neel,
just wrong-headed.
o) Tweak mem.c to fix use of /dev/kmem for direct-mapped addresses.
ones implemented using assembly.
o) Use TRAPF_USERMODE() consistently rather than USERMODE(). Eliminate
<machine/psl.h> as a result.
o) Use intr_*() rather than *intr(), consistently.
o) Use register_t instead of u_int in some trap code.
o) Merge some more endian-related macros to machine/asm.h from NetBSD.
o) Add PTR_LI macro, which loads an address with the correct sign-extension for
a pointer.
o) Restore interrupts when bailing out due to an excessive IRQ in
nexus_setup_intr().
o) Remove unused functions from psraccess.S.
o) Enter temporary virtual entries for large memory access into the page tables
rather than simply hoping they stay resident in the TLB and we don't need to
do a refill for them.
o) Abstract out large memory mapping setup/teardown using some macros.
o) Do mips_dcache_wbinv_range() when using temporary virtual addresses just
like we do when we can use the direct map.
sparc64.
o) Use uiomove_fromphys rather than the broken fpage mechanism for /dev/mem.
o) Update sf_buf allocator to not share buffers and to do a pmap_qremove when
done with an sf_buf so as to better track valid mappings.
bit.
o) Remove some unused inlines.
o) Generate CP0 access functions for 64-bit TLB registers when building for
n64.
o) Add an inline function version of the COP0_SYNC macro.
Note: the *64 interfaces are no longer exposed via zlib.h but were keep
as public interfaces;
Note 2: this commit would break applications that uses the moved symbols
directly.
