Commit Graph

38 Commits

Author SHA1 Message Date
Peter Wemm
885fbc97c1 Fix new compiler unhappiness. 2002-05-24 06:01:07 +00:00
Kirk McKusick
0d2af52141 Introduce the new 64-bit size disk block, daddr64_t. Change
the bio and buffer structures to have daddr64_t bio_pblkno,
b_blkno, and b_lblkno fields which allows access to disks
larger than a Terabyte in size. This change also requires
that the VOP_BMAP vnode operation accept and return daddr64_t
blocks. This delta should not affect system operation in
any way. It merely sets up the necessary interfaces to allow
the development of disk drivers that work with these larger
disk block addresses. It also allows for the development of
UFS2 which will use 64-bit block addresses.
2002-03-15 18:49:47 +00:00
Poul-Henning Kamp
af91f4fa16 GC: BIO_ORDERED going away. 2002-02-22 09:18:46 +00:00
Greg Lehey
7b4bf18baa Change #if VINUMDEBUG to #ifdef VINUMDEBUG. This is a flag, not a variable. 2001-05-23 23:24:05 +00:00
Dag-Erling Smørgrav
a8513d6f69 Re-commit revision 1.32, which grog incorrectly backed out in revision 1.33. 2000-12-20 11:17:09 +00:00
Greg Lehey
7509f91aba revive_block: Don't go beyond the end of the stripe when reviving
striped plexes.

Submitted by:   des

Don't lock buffers before calls to sdio, sdio does it by itself.

Submitted by:	tegge

parityops:	Use correct casts when returning error information.
2000-12-20 05:18:58 +00:00
Dag-Erling Smørgrav
cd085280b5 Make sure we don't cross stripe boundaries when reviving striped plexes.
This makes crash recovery work for stripe sizes that are not multiples of
DEFAULT_REVIVE_BLOCKSIZE (currently 64 kB).
While we're here, fix a few cosmetic nits.

Reviewed by:	grog
Sponsored by:	Enitel ASA (http://www.enitel.no/)
2000-11-17 23:40:01 +00:00
Greg Lehey
fe8b826551 revive_block:
Fix several instances of breakage in RAID-5 revive code.

   Tidy up code.

parityops:
   Don't attempt to do anything if the plex is degraded or worse.

parityrebuild:
   Add comments.
   Perform transfers in correct length.
2000-06-07 03:33:09 +00:00
Greg Lehey
f68de48880 parity ops: Correctly recognize the end of the plex. Previously we
were running off the end and generating worrying but harmless messages
about parity errors that wouldn't go away.
2000-06-05 03:01:07 +00:00
Greg Lehey
b441812ca5 parityrebuild: write the parity block back to the correct subdisk.
HEADS UP: This fixes a serious data corruption bug when using the
userland command 'rebuildparity'.
2000-06-02 04:05:40 +00:00
Greg Lehey
9b8f5e3c15 Rewrite parity maintenance functions.
revive_block: Correct bug introduced in revision 1.25 which caused
Add fields to vinum_ioctl_msgexcessive concurrent requests followed by
system death.
2000-05-11 07:26:33 +00:00
Poul-Henning Kamp
87150cb06d s/biowait/bufwait/g
Prodded by: several.
2000-04-29 16:25:22 +00:00
Greg Lehey
b3fce61714 initsd(): Complete the intention of revision 1.25 and write init data to disk.
Sleuthwork-by:	alfred
2000-04-22 09:05:16 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Alfred Perlstein
4bb4aee894 repair half-Danish b.b_iocmd damage where writes/reads weren't getting
set properly in the struct buf with vinum:

  Fix locations where B_READ was cleared in the old code but
    b.b_iocmd wasn't set to BIO_WRITE
  Fix propogation of b_iocmd
  Correct comments to reflect reality
  Don't compare b_flags with BIO_READ, it's in b_iocmd.

Submitted by: Bernd Walter <ticso@cicely.de>
2000-03-26 23:06:12 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Greg Lehey
c6dd6dd0d0 Tidy up splbio() protection.
Tidy up locking.  Previously we were taking two locks for a parity
block, and only releasing one of them.

Implicitly-sanctioned-by:	jkh
2000-03-01 07:25:07 +00:00
Greg Lehey
ea77bd8579 Fix horrible, embarrassing breakage which caused occasional panics and
data corruption.  It's a wonder it worked at all.

Led-on-the-right-path-by:  dillon

revive_block: Add treatment for RAID-4.

Add function parityrebuild, called by revive_block and parityops.

Approved-by:  jkh
2000-02-29 06:15:26 +00:00
Greg Lehey
b110a1e60b Correct printf format for pointers to avoid compilation warnings on
alpha.

Explicitly type large scalar parameters to avoid compilation warnings
on alpha.

Submitted-by:	      Bernd Walter <ticso@cicely.de>

Make better checks that the revive block size is valid, silently set
it to the defaults if not.

Replace block device macros with generalized device macros.
2000-01-05 06:11:46 +00:00
Greg Lehey
88bba10194 revive_block: Add a check for a too high revive block size. This is
possible now that vinum(8) can specify this size.

Add function initsd, which initializes a subdisk and optionally checks
that it really happened.
1999-10-13 03:20:11 +00:00
Greg Lehey
c460c4f8b3 revive_block: set b_resid correctly.
parityops: New function to check and rebuild RAID-5 parity blocks.
Not yet usable.
1999-09-28 22:57:29 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Greg Lehey
0911b330a0 Lock stripes of striped and RAID-5 plexes before writing them. This
avoids a race condition where multiple RAID-5 subdisks are being
revived at the same time.  The locks should also prevent conflicts
with user requests on concatenated and striped plexes, but this needs
more work.

Tidy up some comments.
1999-08-24 02:28:37 +00:00
Greg Lehey
b853969e09 Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>
1999-08-07 08:11:22 +00:00
Greg Lehey
3252fdcd97 Lock buffer before calling strategy.
Idea-stolen-from:	peter (sys/dev/ccd/ccd.c revision 1.49)
1999-06-29 04:10:05 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Greg Lehey
e4d6d0216b Modify to work with new style dev_t.
With_copious_input_from:  peter
			  phk
1999-05-15 05:49:21 +00:00
Greg Lehey
560863926b Remove old grunge, including references to sys/disk.h (which is going
away).

Submitted-by:	phk
1999-05-07 01:35:29 +00:00
Greg Lehey
72dec6f286 Change printf() calls to log() calls. 1999-03-02 06:56:39 +00:00
Greg Lehey
7f1050341c Change multiline comments to start with a lone /* and end with a */,
apparently in accordance with style(9).

Complained-about-by: bde
1999-01-29 01:17:54 +00:00
Greg Lehey
2178c45997 Change the style of revive: revive subdisks instead of plexes. This
makes it easier to keep track of which parts of a plex need reviving.

Use sdio, not vinumstrategy, to write to the subdisk.
1999-01-21 00:40:03 +00:00
Greg Lehey
acf3160e71 Fix an overflow problem which prevented revive from working on plexes
of more than 4 GB.

Reported by: dg
1999-01-06 23:11:29 +00:00
Peter Wemm
c285ca1254 Some relatively minor tweaks to enable vinum to be built into a static
kernel as a pseudo-device.  The changes were:
- #ifdef DEBUG -> #ifdef VINUMDEBUG
- opt_vinum.h for holding above config variable
- Fixing up a few stray problems where DEBUG wasn't optional.
- config.c -> vinumconfig.c (there's already a config.o)
- Other *.c -> vinum*.c (wasn't strictly necessary, but done in case we end
  up with something else conflicting later on and we might have to have yet
  more repository copies of files).
- include file paths fixups..  (ie: get them all from the kernel tree
  instead of partly from the kernel and partly from /usr/include/machine)

I've spoken with Greg about this..  I hope this doesn't mess him around
too much..
1998-12-28 16:28:24 +00:00
Peter Wemm
ef2dbe9885 If I've done this right, revive the vinum code in it's now home after it
was savaged in the blood bath a few hours ago.
1998-12-28 04:56:24 +00:00
Søren Schmidt
c74cd3590f Remove LKM's depricated by modules. 1998-12-27 19:38:15 +00:00
Greg Lehey
d45fbfc7a1 Get the default revive blocksize right for striped and RAID-5 plexes 1998-11-02 04:10:19 +00:00
Greg Lehey
759ae89394 Correct calculation of revive blocksize
Submitted by: Chris Csanady
1998-09-28 04:24:10 +00:00
Greg Lehey
e4381fa521 Import base vinum lkm sources 1998-09-16 05:56:21 +00:00