The existing code in zmount incorrectly parses the comma-delimited option
string. The result is that nmount only honors the last option. AFAICT the
parsing has been broken ever since ZFS's initial import in change 168404.
PR: 222078
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12232
When inserting a partitioned disk, devfs and geom will announce the whole
disk before they announce the partition. If the partition containing ZFS
extends to one of the disk's extents, then zfsd will see a ZFS label on the
whole disk and attempt to online it. ZFS is smart enough to activate the
partition instead of the whole disk, but only if GEOM has already created
the partition's provider.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_import.c
Add a zpool_read_all_labels method. It's similar to
zpool_read_label, but it will return the number of labels found.
cddl/usr.sbin/zfsd/zfsd_event.cc
When processing a DevFS CREATE event, only online a VDEV if we can
read all four ZFS labels.
Reviewed by: mav
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11920
The aggregation created by llquantize() partitions values into buckets; the
lower bound of the bucket containing the largest values is b^{m+1}, where
b and m are the second and fourth parameters to the action, respectively.
Bucket bounds are stored in a 64-bit integer, and so the llquantize()
validation checks need to verify that b^{m+1} fits in 64 bits. However, it
was only verifying that b^{m-1} fits in 64 bits, so certain parameter
combinations could trigger assertion failures in libdtrace.
PR: 219451
MFC after: 1 week
illumos/illumos-gate@77b171372e77b171372ehttps://www.illumos.org/issues/7600
At present, the kernel side code seems to blindly rollback to whatever happens
to be the latest snapshot at the time when the rollback task is processed.
The expected target's name should be passed to the kernel driver and the sync
task should validate that the target exists and that it is the latest snapshot
indeed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@b7edcb9408b7edcb9408https://www.illumos.org/issues/8378
The problem is that zfs_get_data() supplies a stale zgd_bp to dmu_sync(), which
we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it copies db_blkptr
to zgd_bp, dbuf_write_ready()
could change db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale
BP and that the dbuf it not dirty, so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after acquiring the
db_mtx. We could still see a stale
db_blkptr, but if it is stale then the dirty record will still exist and thus
we won't attempt to nopwrite.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@e09ba01dcde09ba01dcdhttps://www.illumos.org/issues/8418
The following line in zfs_validate_name() is just a no-op and it
should be removed:
108 (void) zfs_prop_get_table();
Reviewed by: Vitaliy Gusev <gusev.vitaliy@icloud.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
MFC after: 2 weeks
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
This test is also timeout on a quiet system because there is nobody triggering
read probefunc while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11731
verifying script which needs being run to complete the test.
While here, add missing shebang.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11716
In Solaris, basename(1) and basename(3) both return "." while being given an
empty string (""), while in BSD (and Linux) basename(1) returns "" and
basename(3) returns "."
While here, also change #!/usr/bin/ksh to #!/usr/bin/env ksh to find ksh in
$PATH
Reviewed by: gnn, markj (earlier version), ngie (earlier version)
Differential Revision: https://reviews.freebsd.org/D11707
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D11676
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11674
testing.
This test times-out on a quiet system because there is nobody triggers
syscall::open:entry or syscall::: probe while test execution.
Reviewed by: gnn, markj (earlier version)
Differential Revision: https://reviews.freebsd.org/D11671
This test timeout on a quiet system because there is nobody triggers
'syscall::*wait*:entry' probe while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11668
illumos/illumos-gate@770499e185770499e185https://www.illumos.org/issues/8021
The ARC buf data project (known simply as "ABD" since its genesis in the ZoL
community) changes the way the ARC allocates `b_pdata` memory from using linear
`void *` buffers to using scatter/gather lists of fixed-size 1KB chunks. This
improves ZFS's performance by helping to defragment the address space occupied
by the ARC, in particular for cases where compressed ARC is enabled. It could
also ease future work to allocate pages directly from `segkpm` for minimal-
overhead memory allocations, bypassing the `kmem` subsystem.
This is essentially the same change as the one which recently landed in ZFS on
Linux, although they made some platform-specific changes while adapting this
work to their codebase:
1. Implemented the equivalent of the `segkpm` suggestion for future work
mentioned above to bypass issues that they've had with the Linux kernel memory
allocator.
2. Changed the internal representation of the ABD's scatter/gather list so it
could be used to pass I/O directly into Linux block device drivers. (This
feature is not available in the illumos block device interface yet.)
FreeBSD notes:
- the actual (default) chunk size is 4KB (despite the text above saying 1KB)
- we can try to reimplement ABDs, so that they are not permanently
mapped into the KVA unless explicitly requested, especially on
platforms with scarce KVA
- we can try to use unmapped I/O and avoid intermediate allocation of a
linear, virtual memory mapped buffer
- we can try to avoid extra data copying by referring to chunks / pages
in the original ABD
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Dan Kimmel <dan.kimmel@delphix.com>
MFC after: 3 weeks
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
illumos/illumos-gate@a4b8c9aa65a4b8c9aa65https://www.illumos.org/issues/8264
Oddly there is a lzc_clone function, but no lzc_promote function.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
MFC after: 1 week
illumos/illumos-gate@690031d326690031d326https://www.illumos.org/issues/8168
If we manage to export the pool on which we are creating a dataset (filesystem
or zvol) between entering libzfs`zfs_create() and libzfs`zpool_open() call (for
which we never check the return value) we end up dereferencing a NULL pointer
in libzfs`zpool_close().
This was discovered on ZFS on Linux. The same issue can be reproduced on
Illumos running in parallel:
while :; do zpool import -d /tmp testpool ; zpool export testpool ; done
while :; do zfs create testpool/fs; zfs destroy testpool/fs ; done
Eventually this will result in several core dumps like this one:
[root@52-54-00-d3-7a-01 /cores]# mdb core.zfs.4244
Loading modules: [ libumem.so.1 libc.so.1 libtopo.so.1 libavl.so.1
libnvpair.so.1 ld.so.1 ]
> ::stack
libzfs.so.1`zpool_close+0x17(0, 0, 0, 8047450)
libzfs.so.1`zfs_create+0x1bb(8090548, 8047e6f, 1, 808cba8)
zfs_do_create+0x545(2, 8047d74, 80778a0, 801, 0, 3)
main+0x22c(8047d2c, fef5c6e8, 8047d64, 8055a17, 3, 8047d70)
_start+0x83(3, 8047e64, 8047e68, 8047e6f, 0, 8047e7b)
>
Fix and reproducer (systemtap): https://github.com/zfsonlinux/zfs/pull/6096
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 2 weeks
illumos/illumos-gate@79809f9cf479809f9cf4https://www.illumos.org/issues/8269
It seems that currently normalization of stddev aggregation is done
incorrectly.
We divide both the sum of values and the sum of their squares by the
normalization factor. But we should divide the sum of squares by the
normalization factor squared to scale the original values properly.
FreeBSD note: the actual change was committed in r316853, this commit
adds the test files and record merge information.
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
Sponsored by: Panzura
illumos/illumos-gate@471a88e499471a88e499https://www.illumos.org/issues/5380
A stream created with zfs send -p -I contains properties of all snapshots of a
given dataset as opposed to only properties of snapshots in a given range.
Not only this is suboptimal but the receive code also does not filter
properties by the range. So, properties of earlier snapshots would be updated
even though the snapshots themselves are not in the stream (just their
properties).
Given that modifying the snapshot properties requires a TXG sync and that the
snapshots are updated one by one the described behavior may lead to a sever
performance penalty.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@8b65a70b768b65a70b76https://www.illumos.org/issues/7541
When calling zpool import, zpool does a few ioctls to ZFS.
zpool allocates a buffer in userland and passes it to the kernel so that ZFS
can copy info into it. ZFS will use it to put the nvlist that describes the
pool configuration.
If the allocated buffer is too small, ZFS will return ENOMEM and the call will
have to be redone. This wastes CPU time and slows down the import process. This
happens very often for the ZFS_IOC_POOL_TRYIMPORT call.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@4dd77f9e384dd77f9e38https://www.illumos.org/issues/7545
When evicting from the ARC, we manipulate some refcount_t's, e.g. arcs_size.
When using zdb to examine a large amount of data (e.g. zdb -bb on a large pool
with small blocks), the ARC may have a large number of entries. If reference
tracking is enabled, there will be ~1 reference for each block in the ARC. When
evicting, we decrement the refcount and have to search all the references to
find the one that we are removing, which is very slow.
Since zdb is typically used to find problems with the on-disk format, and not
with the code it is running, we should disable reference tracking in zdb.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
pthread_cond_timedwait() receives absolute time, not relative. Passing
wrong time there caused two threads of zdb to spin in a tight loop.
MFC after: 1 week
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7386 zfs get does not work properly with bookmarks
illumos/illumos-gate@edb901aab9edb901aab9https://www.illumos.org/issues/7386
The zfs get command does not work with the bookmark parameter while it works
properly with both filesystem and snapshot:
# zfs get -t all -r creation rpool/test
NAME PROPERTY VALUE SOURCE
rpool/test creation Fri Sep 16 15:00 2016 -
rpool/test@snap creation Fri Sep 16 15:00 2016 -
rpool/test#bkmark creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test@snap
NAME PROPERTY VALUE SOURCE
rpool/test@snap creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test#bkmark
cannot open 'rpool/test#bkmark': invalid dataset name
#
The zfs get command should be modified to work properly with bookmarks too.
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
