mtx right now as it makes debugging harder. When we are in optimizing
mode, we can revisit this.
- Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate
0x's in KTR output.
- During witness_fixup, release Giant so that witness doesn't get confused.
Also, grab all_mtx while walking the list of mutexes.
- Remove w_sleep and w_recurse. Instead, perform checks on mutexes using
the mutex's mtx_flags field.
- Allow debug.witness_ddb and debug.witness_skipspin to be set from the
loader.
- Add Giant to the front of existing order_list entries to help ensure
Giant is always first.
- Add an order entry for the various proc locks. Note that this only
helps keep proc in order mostly as the allproc and proctree mutexes are
only obtained during a lockmgr operation on the specified mutex.
to extract the PC from that to send to addupc_task() so that it can be
called from MI code.
- Remove all traces of have_giant with extreme prejudice and use
mtx_owned(&Giant) instead where appropriate.
- Proc locking.
- P_FOO -> PS_FOO.
- Don't grab Giant just to look in curproc's p_addr during a trap since we
may choose to immediately exit. Instead, delay grabbing Giant a bit
until we actually need it.
- Don't reset 'p' to 'curproc' in syscall() to handle the case of a child
returning from fork1() since children don't return via syscall().
- Remove an XXX comment in ast() that questions the correctness of the
userland check. The code is correct.
- Don't send IPIs for pmap_invalidate_page() or pmap_invalidate_all()
in the UP case.
- Catch up to cpuno -> cpuid.
- Convert some sanity checks that were #ifdef DIAGNOSTIC to KASSERT()'s.
- Rename the per-CPU variable 'cpuno' to 'cpuid'. This was done so that
there is one consistent name across all architectures for a logical
CPU id.
- Remove all traces of IRQ forwarding.
- Add globaldata_register() hook called by globaldata_init() to register
globaldata structures in the cpuid_to_globaldata array.
- Catch up to P_FOO -> PS_FOO.
- Bring across some fixes for forwarded_statclock() from the i386 version
to handle ithreads and idleproc properly.
- Rename addugd_intr_forwarded() to addupc_intr_forwarded() so that it is
the same name on all architectures.
- Set flags in p_sflag instead of calling psignal() from
forward_hardclock().
- Proc locking.
- When we handle an IPI, turn off its bit in the mask of IPI's we are
currently handling so that an IPI doesn't send a CPU into an infinite
loop.
that mutex operations work.
- Enter Giant earlier so we hold it during boot.
- Proc locking.
- Move globaldata_init() into here from mp_machdep.c so that UP kernels
don't depend on mp_machdep.c. Use a callout in the SMP case to register
the boot processor's globaldata in the cpuid_to_globaldata array.
that name as a variable. Use mtx_owned(&Giant) where appropriate
instead.
- Proc locking.
- P_FOO -> PS_FOO.
- Update comments about enable interrupts during trap and why this may be
bad if we trap while holding a spin mutex.
- Don't bother resetting p to curproc in syscall() in case we are the child
returning from fork. The child hasn't returned from fork through syscall
in a while.
- Remove fork_return() as it has been superseded by the MI version.
the alpha mp_machdep.c.
- Proc locking.
- Catch up to the P_FOO -> PS_FOO proc flags changes.
- Stick ap_init()'s prototype with the other prototypes.
- Remove the Xforwardirq IPI.
- Remove unused simplelocks.
- Don't try to psignal() from forward_statclock(), but set the appropriate
signal pending flag in p_sflag instead.
- Add in KTR_SMP tracepoints for various SMP functions. (Brought over
from the alpha port)
- Setup proc0.p_heldmtx, proc0.contested, and curproc earlier so that we
can use mutexes.
- Initialize sched_lock and Giant earlier and enter Giant during init386.
- Use suser(9) instead of checking cr_uid directly.
and is protected by the proc lock. p_sflag is protected by sched_lock
and holds the following flags: PS_INMEM, PS_OWEUPC, PS_PROFIL, PS_SINTR,
PS_TIMEOUT, PS_ALRMPEND, PS_PROFPEND, PS_CVWAITQ, PS_SWAPINREQ, and
PS_SWAPPING.
- p_klist is definitely locked now by the proc lock.
- p_runtime, p_[usi]u are locked by sched_lock.
- Add a new P_KTHREAD flag set for kernel threads created via
kthread_create(9).
- STOPEVENT() only needs the proc lock, it does not need Giant.
- faultin() already checks PS_INMEM, so simplify the check in PHOLD() so
that we only need to grab the proc lock and let faultin() perform the
PS_INMEM check.
- Add a prototype for zpfind().
- Add prototypes for the new fork_exit() and fork_return() MI functions
that manage the fork return path.
- Add a prototype for the MD function userret() so that it can be called
from fork_return().
- Add needed include of <machine/frame.h> in the kernel.
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
- remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
an override as a loader settable variable (fxp_iomap). fxp_iomap is
a bitmap of fxp units that should be configured to use PCI I/O space
in stead of PCI Memory space.
Reviewed by: Kees Jan Koster <dutchman@tccn.cs.kun.nl>, dg@freebsd.org
we must also inform the card of this change. Otherwise the sequencer
will traverse a corrupt list of SCBS. The side effects of this problem
were unknown SCBs completing in the qoutfifo or worse yet, panics due
to sequencer interrupts that referenced what, to the kernel, were invalid
SCB ids.
- Fix several bugs in the wait syscall, including freeing the actual
proc start, freeing the args, freeing the prison, and other minor
nits.
- Use appropriate queue(3) macros.
- Use zpfind() instead of walking zombproc ourselves.
- Use proper atomic operations to make the run time initialization
controlled by svr_str_initialized be MP safe.
- Use appropriate queue(3) macros where needed.
available, the error return should be EADDRNOTAVAIL rather than
EAGAIN.
PR: 14181
Submitted by: Dima Dorfman <dima@unixfreak.org>
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
* This file must be kept synchronized with <sys/timespec.h>.
* It defines a structure which must be a type pun for
* `struct timespec'; this structure is used in header files where
* the ABI uses a `struct timespec' but standards prohibit its
* definition. (Currently only <sys/stat.h>.)
calls returning EACCES instead of EPERM. This patch modifies vaccess()
to return EPERM instead of EACCES if VADMIN is among the requested
rights. This affects functions normally limited to the owners of
a file, such as chmod(), as EPERM is the error indicating that
privilege would allow the operation, rather than a chance in mandatory
or discretionary rights.
Reported by: bde
splimp() -- we need it because dummynet can be invoked by the
bridging code at splimp().
This should cure the pipe "stalls" that several people have been
reporting on -stable while using bridging+dummynet (the problem
would not affect routers using dummynet).
+ configuration: make sure that the NUL at the end of the config
string is properly detected and handled, and the stats passed
up via sysctl properly reflect which interfaces do bridging.
(The whole config support might make good use of some cleanup
in the future).
+ fixed some bugs related to the corruption of multicast and
broadcast packets: make sure that for those packets the entire
IP + ethernet header is in the mbuf, not in a cluster, so
that writes performed in that area by the upper layers do
not affect us.
+ performance: when calling m_pullup, make room for the ethernet header
as well, we are going to add it in right after. Also, change an m_dup
back to m_copypacket. The former is not necessary anymore now, and
it did not help, anyways.
I will do a fast MFC because 95% of this patch is fixing bad bugs
and i doubt anyone would test the fix in CURRENT. Plus the last
two items mostly bring back some code which was already there in 4.0
times.
Initialize rid to 0. This doesn't seem to make any difference
(the driver doesn't care what rid it gets and no-one seems to
check rid's value), but follows standard conventions.
Pass in our device_t to ahc_alloc(). We now use device_T
softc storage, so passing NULL results in a panic.
Set the unit number in our softc so that the driver core
can retrieve it.
ahc_pci.c:
Set the unit number in our softc so that the driver core
can retrieve it.
aic7770.c:
Insert our softc into the list of softcs when initialization
is successful.
aic7xxx.c:
Remove a workaround for an aic7895 bug we will never trigger.
Add additional diagnostic info to ahc_dump_card_state().
Always panic the system if a sequencer assertion fails.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Replace a hard coded number with a constant.
Guard against looping forever in ahc_pause_and_flushwork().
A hot eject or card failure may make the intstat register
return 0xFF, so limit the number of interrupts we'll process.
Correct the code in ahc_search_qinfifo() that guarantees that
the sequencer will see an abort collision if the qinfifo is
modified when a DMA is in progress. We now do this fixup
after modifying the queue. This guarantees that the HSCB
we place at the head of the queue is not the same as the
old head. Using "next hscb" (guaranteed not to be the
same as the first SCB) before clearing the queue could free
up the original head hscb to be used during a remove operation
placing it again at the head of the qinfifo.
aic7xxx.h:
Reduce the maximum number of outstanding commands to 253 from
254. To handle our output queue correctly on machines that only
support 32bit stores, we must clear the array 4 bytes at a
time. To avoid colliding with a DMA write from the sequencer,
we must be sure that 4 slots are empty when we write to clear
the queue. This reduces us to 253 SCBs: 1 that just completed
and the known three additional empty slots in the queue that
preceed it. Yahoo was able to force this race on one of their
systems. Interrupts were disabled for such a time that the
entire output queue was filled (254 entries complete without
any processing), and our 32bit write to clear the status clobbered
one entry.
Add a feature tag for devices that are removable.
aic7xxx.reg:
Never use the sequencer interrupt value of 0xF0. We need
to guanrantee that an INTSTAT value of 0xFF can only occur
during card failure or a hot-eject.
Align the busy targets table with the begining of scratch
space. This seems to appease a chip bug in the aic7895.
aic7xxx.seq:
Be sure to disable select-out after a bus free event that occurs
early in a selection. If we don't disable select-out, we will
believe that it is enabled even though a new selection will never
occur.
Move the clearing of SELDI to just before a jump. This appeases
another chip bug of the aic7895.
Make the target mode command loop a bit more efficient.
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
Properly cleanup the last SCB we tested against should we
fail to properly find an SCB for a reselection.
Add some additional sequencer debugging code.
aic7xxx_freebsd.c:
Limit the driver to 253 outstanding commands per adapter.
Guard against overflow in timeout handling.
aic7xxx_inline.h:
AHC_SCB_BTT is a "flag" not a "feature". Check the right
field in the softc.
aic7xxx_pci.c:
Set the removable feature for the apa1480 cardbus and the 29160C
Compact PCI card.
Don't report high byte termination information for narrow cards.
Use a PCI read rather than a questionable delay when fetching/setting
termination settings.
- replace the simplelock in struct vm_zone with a mutex.
- use a proper SLIST rather than a hand-rolled job for the zone list.
- add a subsystem lock that protects the zone list and the statistics
counters.
- merge _zalloc() into zalloc() and _zfree() into zfree(), and
move them below _zget() so there's no need for a prototype.
- add two initialization functions: one which initializes the
subsystem mutex and the zone list, and one that currently doesn't
do anything.
- zap zerror(); use KASSERTs instead.
- dike out half of sysctl_vm_zone(), which was mostly trying to do
manually what the snprintf() call could do better.
Reviewed by: jhb, jasone
inline functions non-inlined. Hide parts of the mutex implementation that
should not be exposed.
Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).
Submitted by: peter
MFC'ed i due time. I can't test it under current right now because
netgraph seems to do unethical things with mutexes.
musycc:
Add status per channel.
Reduce printf chattyness
Keep error counters line if_mn does.
Increase descriptor count.
if_mn:
Support experimental unframed E1 lines.
These two drivers should share more code relating to framed channelized
TDM media in general (T1/E1/E3/T3, Sonet). Anyone interested email me.
interrupt threads to run with it always >= 1, so that malloc can
detect M_WAITOK from "interrupt" context. This is also necessary
in order to context switch from sched_ithd() directly.
Reviewed By: peter
initialization until after malloc() is safe to call, then iterate through
all mutexes and complete their initialization.
This change is necessary in order to avoid some circular bootstrapping
dependencies.
for SMP; just use the same ones as UP. These weren't used without
holding Giant anyway, and the routines that use them would have to
be protected from pre-emption to avoid migrating cpus.
parts: isa and pccard. The isa one is known to work with an IBM
EtherJet ISA card. The pccard one isn't known to work because the
EtherJet pccard I purchased recently arrived DOA :-(. I'll commit the
pccard.conf entry when the replacement card arrives.
I plan on MFC this in a week or two.
pre-emptable kernel. For variables of size 4 bytes or less they compile
to a single instruction, which does not allow a process to migrate cpus
in the middle, and get the value for the "wrong" cpu.
calls it rather than obtaining and releasing it a lot in proc_compare.
- Collect all of the data gathering and stick it just after the
proc_compare loop. This way, we only have to grab sched_lock once now
when handling SIGINFO. All the printf's are done after the values are
calculated.
Submitted mostly by: bde
The counters are incremented when a thread goes to sleep and decremented
either when a thread is woken up by another thread or when the sleep
times out. There existed a race where the sleep count could be decremented
twice resulting in an eventual underflow.
Move the decrementing of the "counters" to the thread initiating the sleep
and thus remedy the problem.
appropriate function, rather than doing a horse-and-buggy
acquire. They now take the mutex type as an arg and can be
used with sleep as well as spin mutexes.
clients have been fixed. (So far as I can tell, all of the user-land
clients of <sys/select.h> do so vacuously, in the expectation that select()
might be declared there.)
SIGXCPU signal, and killing of processes that exceed their allowed run
time until they can play nice with sched_lock. Right now they are just
potentital panics waiting to happen. The printf() has bitten several
people.
not hold sched_lock while calling ttyprintf(). If we are on a serial
console, then ttyprintf() will end up getting the sio lock, resulting in
a lock order violation.
Noticed by: des
o 1.111 imp Sync with FreeBSD.
o 1.110 nonaka Add Roland SCP-55
o 1.109 ichiro add NANOSPEED ROOT-RZ2000 WLAN Card
o 1.108 ichiro add EMTAC A2424i 11Mbps WLAN Card
o 1.107 haya Add IO Data CBIDE2 ata interface card.
o 1.106 jhawk s/NULL}/NULL }/
o 1.105 thorpej " " -> "&sp" in two entries, per Rafal Boni.
o 1.104 thorpej Add SMC 2632W. From Rafal Boni, kern/11775.
o 1.103 drochner add IBM microdrive
o 1.102 soren Typo.
o 1.101 hubertf Add ELSA WaveLAN card & a noname clone(?)
o 1.100 toddpw Socket Comm. PC Card Ethernet, and tidy up naming.
o 1.99 msaitoh MELCO LPC2-TX, Telecom Device TCD-HPC100,
MACNICA ME1-JEIDA
o 1.98 imp Sort BAY into numerical order. (already in FreeBSD)
if_vr: handle the case where vr_encap() returns failure: bust out of the
packet sending loop instead of panicking. Also add some missing
newlines to some printf()s.
if_dc: The miibus_read and miibus_write methods keep swapping in and
out of MII mode by fiddling with CSR6 for cards with MII PHYs.
This is a hack to support the original Macronix 98713 card which
has built-in NWAY that uses an MII-like management interface
even though it uses serial transceivers. Conditionalize this
so that we only do this on 98713 chips, since it does bad things
to genuine tulip chips (and maybe other clones).
{kernel,modules}-reinstall.debug rather than {kernel,modules}-reinstall.
Otherwise, the '.debug' portion of the target is lost, and you end up
reinstalling the non debug version instead of the debug version.
