in GENERIC.
Fixup #ifdef RSS code blocks so that they build and add/delete variables
that were missesd during the creation of this code.
This code is untested and should have a big red warning on it.
Reported by: npn@
MFC after: 2 days
driver. This change significantly increases the overall RX aggregation
ratio for heavily loaded networks handling 10-80 thousand simultaneous
connections.
Remove the turbo LRO code and all references to it which has now been
superceeded by the tcp_lro_queue_mbuf() function.
Tested by: Netflix
Sponsored by: Mellanox Technologies
MFC after: 1 week
In one corner case in the bxe TX path, a NULL mbuf could be enqueued onto
a drbr queue. This could case a KASSERT to fire with INVARIANTS enabled,
or the processing of packets from the queue to be prematurely ended later
on.
Submitted by: Matt Joras (matt.joras AT isilon.com)
Reviewed by: davidcs
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7041
The saved channel callback in util softc is actually never used.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7424
* remove the DEBUG ifdef; defining it is too far reaching throughout
the whole system;
* add a bitmask in the softc for controlling debugging;
* .. enable said debugging as a sysctl;
* add bitmaps for register access, reset and vlans.
TODO:
* Now that the debug statements are configurable, we definitely could
do with more debugging
* Move the debugging into the top-level etherswitch driver and have
sub-drivers obey.
Make FDT blob available via opaque hw.fdt.dtb sysctl, if a DTB has been
installed by the time sysctls are registered.
Reviewed by: andrew
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7411
The interpretation of the Electromechanical Interlock Status was
inverted, so we disengaged the EI if a card was inserted.
Fix it to engage the EI if a card is inserted.
When displaying the slot capabilites/status with pciconf:
- We inverted the sense of the Power Controller Control bit,
saying the power was off when it was really on (according to
this bit). Fix that.
- Display the status of the Electromechanical Interlock:
EI(engaged)
EI(disengaged)
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7426
Simplify the logic involved in changing the nic features on the fly, and
only reset the frontend when really needed (when changing RX features). Also
don't return from the ioctl until the interface has been properly
reconfigured.
While there, make sure XN_CSUM_FEATURES is used consistently.
Reported by: julian
MFC after: 5 days
X-MFC-with: r303488
Sponsored by: Citrix Systems R&D
The Hyper-V on pre-win10 systems will only report SPC-2 conformance,
but it actually conforms to SPC-3. The INQUIRY response is adjusted
to propagate the SPC-3 version information to CAM.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7405
Chelsio T4/T5 adapters are multifunction cards. The main driver uses
physical function 4 (PF4). However, VF devices for SR-IOV are only
supported on physical functions 0 through 3, where PF0 creates VFs tied
to port 0, etc. The t4iov/t5iov driver was previously added to
create VF devices for ports that are present on each adapter. This
change uses the recently added pci_iov_attach_name() function to
name the character device in /dev/iov after the associated port on
the card (e.g. /dev/iov/cxl0 is used to create VFs that share the
cxl0 port). With this in place, mark the t4iov/t5iov devices quiet
to prevent them from cluttering dmesg.
Reviewed by: rstone
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7402
The PCI_IOV option creates character devices in /dev/iov for each PF
device driver that registers support for creating VFs. By default the
character device is named after the PF device (e.g. /dev/iov/foo0).
This change adds a variant of pci_iov_attach() called pci_iov_attach_name()
that allows the name of the /dev/iov entry to be specified by the
driver.
Reviewed by: rstone
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7400
VF devices use a different register layout than PF devices. Storing
the offset in a value in the softc allows code to be shared between the
PF and VF drivers.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7389
After further review of the spec, I do not think the current HotPlug
code handles slots with power controllers correctly. In particular,
the power state of the slot is to be inferred from other events, not
from examining the state of the power control bit in SLOT_CTL. For now,
disable PCI hotplug support on such slots.
PR: 211081
Tested by: Jeffrey E Pieper <jeffrey.e.pieper@intel.com>
MFC after: 3 days
but only in the NETMAP code. This lead to the NETMAP code paths
passing nothing up to userland.
Submitted by: Ad Schellevis <ad@opnsense.org>
Reported by: Franco Fichtner <franco@opnsense.org>
MFC after: 1 day
Just make sure that the total channel packet size does not exceed 1/2
data size of the TX bufring.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7359
No, this isn't a star trek science joke - sometimes LEDs are wired
up to be active low, so this is needed.
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
* iwm_poll_bit() returns 1 on success and 0 on failure, whereas
iwl_poll_bit() in Linux's iwlwifi returns >= 0 on success and < 0 on
failure.
* Because of the wrong iwm_poll_bit return code check, no warning was
printed if tx DMA stopping failed.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7371
- Remove null open/close methods.
- Don't set d_flags to 0 explicitly.
- Remove t5_cdevsw as the .d_name member isn't really used and doesn't
warrant a separate cdevsw just for the name.
- Use ENOTTY as the error value for an unknown ioctl request.
- Use make_dev_s() to close race with setting si_drv1.
Sponsored by: Chelsio Communications
I believe it never worked correctly for more the one queue even in Linux.
This fixes case when one of consumer drivers is not loaded on one side,
but its queues still announced as ready if something else brought link up.
While there, remove some pointless NULL checks.
Some systems and/or devices (such as riser cards) do not include a
non-compliant implementation of PCI-e HotPlug that can result in devices
not being attached (e.g. the HotPlug code might assume that a card is
being unplugged and will power the slot off and detach it). This
tunable can be set to 0 to disable support for PCI-e HotPlug ignoring
the incorrect HotPlug state on these slots.
PR: 211081
Reported by: Sergey Renkas <serg_ic@mail.ru> (SuperMicro X7 riser card)
Reported by: Jeffrey E Pieper <jeffrey.e.pieper@intel.com>
(Intel X520 adapter)
MFC after: 1 week
Relnotes: yes
New design allows to attach multiple consumers to ntb_transport(4) instance.
Previous design obtained from Linux theoretically allowed that, but was not
practically usable (Linux also has only one consumer driver now).
In certain circumstances xn_txq_mq_start might be called with num_queues ==
0 during the resume phase after a migration, which can trigger a KASSERT.
Fix this by making sure the carrier is on before trying to transmit, or else
return that the queues are full.
Just as a note, I haven't been able to reproduce this crash on my test
systems, but I still think it's possible and worth fixing.
Reported by: Karl Pielorz <kpielorz_lst@tdx.co.uk>
Sponsored by: Citrix Systems R&D
MFC after: 5 days
Reviewed by: Wei Liu <wei.liu2@citrix.com>
Differential revision: https://reviews.freebsd.org/D7349
only for now, but wouldn't be too difficult to add support for FDT.
Reviewed by: hselasky
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7352
