On laptops like the ThinkPad X240, ClickPad buttons are located at the
top. The hw.psm.synaptics.softbuttons_y sysctl was supposed to allow this
by setting the value to a negative one (e.g. -1700). However, the
condition was wrong (double negative), and doing that placed the buttons
in an unreachable area.
PR: 216342
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
This effectively provides the same benefit as applying MADV_FREE inline
upon every execve, since the page daemon invokes lowmem handlers prior to
scanning the inactive queue. It also has less overhead; the cost of
applying MADV_FREE is very noticeable on many-CPU systems since it includes
that of a TLB shootdown of global PTEs. For instance, this change nearly
halves the system CPU usage during a buildkernel on a 128-vCPU EC2
instance (with some other patches applied).
Benchmarked by: cperciva (earlier version)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9586
This solves several problems.
First of all, cmc_throttle is specified in seconds and there was no
conversion between ticks and seconds when they were mixed together.
Second, we avoid potential problems with ticks wrapping around.
Resolution of time_uptime should be sufficient for the throttling
purposes.
Discussed with: jhb
MFC after: 12 days
Previously, if the threshold was changed, then MC_CTL2_CMCI_EN would get
cleared and the logic would switch to the polling only mode.
Discussed with: jhb
MFC after: 2 weeks
NSS modules are loaded when nsswitch.conf is parsed and may register their
own atexit handlers with libc. nss_atexit() unloads any dynamically loaded
NSS modules, so it should run only after the modules' atexit handlers have
been invoked.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
getdents64() with wrapper over kern_getdirentries().
The patch was originally written by emaste@ and then adapted by trasz@
and me.
Note:
1. I divided linux_getdents() and linux_readdir() as in case when the
getdents() called with count = 1 (readdir() case) it can overwrite
user stack (by writing to user buffer pointer more than 1 byte).
2. Linux returns EINVAL in case when user supplied buffer is not enough
to contain fetched dirent.
3. Linux returns ENOTDIR in case when fd points to not a directory.
Reviewed by: trasz@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D2210
All this code is based on assumption that data will be stored in one piece,
and since buffer size if known and fixed, it is easier to hardcode it.
MFC after: 2 weeks
This patch adds a new function to the server krpc called
svcpool_close(). It is similar to svcpool_destroy(), but does not free
the data structures, so that the pool can be used again.
This function is then used instead of svcpool_destroy(),
svcpool_create() when the nfsd threads are killed.
PR: 204340
Reported by: Panzura
Approved by: rmacklem
Obtained from: rmacklem
MFC after: 1 week
Define them as RLIM_INFINITY. This is allowed by POSIX in case all
resource limits are representable in an object of type rlim_t. Since
we do not allow negative rlim_t, with some strength this definition is
conforming.
We are not conforming fully still because POSIX requires rlim_t to be
unsigned type. Fixing this without breaking ABI to redefine
RLIM_INFINITY is impossible.
PR: 209729
Submitted by: bltsrc@mail.ru
Exp-run done by: antoine
MFC after: 2 weeks
Since locks are dropped when a thread suspends, it's possible for another
thread to deliver a signal to the suspended thread. If the thread awakens from
suspension without checking for signals, it may go to sleep despite having
a pending signal that should wake it up. Therefore the suspension check is
done first, so any signals sent while suspended will be caught in the
subsequent signal check.
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9530
In general case m_pullup() does not really guarantee any data alignment.
Instead of depenting on side effects caused by data being always copied
out of mbuf cluster (which is probably a bug by itself), always allocate
aligned BHS buffer and read data there directly from socket.
While there, reuse new icl_conn_receive_buf() function to read digests.
The code could probably be even more optimized to aggregate those reads,
but until that done, this is still easier then the way it was before.
MFC after: 2 weeks
There could be a race between the vm daemon setting RACCT_RSS based on
the vm space and vmspace_exit (called from exit1) resetting RACCT_RSS to
zero. In that case we can get a zombie process with non-zero RACCT_RSS.
If the process is jailed, that may break accounting for the jail.
There could be other consequences.
Fix this race in the vm daemon by updating RACCT_RSS only when a process
is in the normal state. Also, make accounting a little bit more
accurate by refreshing the page resident count after calling
vm_pageout_map_deactivate_pages().
Finally, add an assert that the RSS is zero when a process is reaped.
PR: 210315
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D9464
Add ACPI device 80860F14 with _UID 3 to the list of known devices. It
make SD card available on NUCs and Minnowboard. Previously added _UID 1
covered only eMMC devices.
Reported by: kib@
MFC after: 1 week
Cleaned up some spaces where tabs should be.
efipart_ioctl() DIOCGMEDIASIZE needs to use uint64_t, not off_t
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9562
* Initialize correct parent in binary_operator's constructor.
* Include <errno.h> explicitly, otherwise errno is undefined (without
NDEBUG, this is accidentally 'fixed' by including <iostream>).
Reported by: matteo
MFC after: 3 days
ip_data_mbuf is always appended to ip_bhs_mbuf, so it does not need own
packet header. This change first avoids allocation/initialization of the
header, and then avoids dropping one when it later gets to socket buffer.
MFC after: 2 weeks
Right now this header file doesn't want to build when included on its
own, as it depends on some integer types that are only declared
internally. Switch it over to use <sys/_types.h> and the __*
counterparts.
meta-data, copy it into the softc structure.
When returning md(4) device details to the caller, include the file name in
any MD_PRELOAD type devices if it is set (first character is not NUL.)
In mdconfig, for "preload" type md(4) devices, if there is file config
available, print it in the file column of the output.
Reviewed by: brooks
Approved by: sjg (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D9529
The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.
SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.
To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.
Reported by: tuexen
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D9538
Rename kern_vm_* functions to kern_*. Move the prototypes to
syscallsubr.h. Also change Mach VM types to uintptr_t/size_t as
needed, to avoid headers pollution.
Requested by: alc, jhb
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9535
Return full channel list via iwi_getradiocaps() method
(ieee80211_init_channels() was replaced with iwi_getradiocaps()
to be consistent with other drivers).
PR: 216923
Submitted and tested by: ds@ukrhub.net (original patch)
MFC after: 5 days
em_local_timer() executions during normal operation and was very likely
to cause a lock up on igb(4) devices.
Submitted by: Matt Macy (mmacy@nextbsd.org)
Reported by: jtl
Reviewed by: gallatin
Sponsored by: Limelight Networks & Netflix
For regular files and posix shared memory, POSIX requires that
[offset, offset + size) range is legitimate. At the maping time,
check that offset is not negative. Allowing negative offsets might
expose the data that filesystem put into vm_object for internal use,
esp. due to OFF_TO_IDX() signess treatment. Fault handler verifies
that the mapped range is valid, assuming that mmap(2) checked that
arithmetic gives no undefined results.
For device mappings, leave the semantic of negative offsets to the
driver. Correct object page index calculation to not erronously
propagate sign.
In either case, disallow overflow of offset + size.
Update mmap(2) man page to explain the requirement of the range
validity, and behaviour when the range becomes invalid after mapping.
Reported and tested by: royger (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is both a microoptimization and a move of the consumer to more
commonly used vm function.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
