Commit Graph

2073 Commits

Author SHA1 Message Date
Marcel Moolenaar
91078fca0c sigset_t change (part 3 of 5)
-----------------------------

By introducing a new sigframe so that the signal handler operates
on the new siginfo_t and on ucontext_t instead of sigcontext, we
now need two version of sendsig and sigreturn.

A flag in struct proc determines whether the process expects an
old sigframe or a new sigframe. The signal trampoline handles
which sigreturn to call. It does this by testing for a magic
cookie in the frame.

The alpha uses osigreturn to implement longjmp. This means that
osigreturn is not only used for compatibility with existing
binaries. To handle the new sigset_t, setjmp saves it in
sc_reserved (see NOTE).

the struct sigframe has been moved from frame.h to sigframe.h
to handle the complex header dependencies that was caused by
the new sigframe.

NOTE: For the i386, the size of jmp_buf has been increased to hold
      the new sigset_t. On the alpha this has been prevented by
      using sc_reserved in sigcontext.
1999-09-29 15:06:27 +00:00
Matt Jacob
f327fe4c57 Fix from Tor so that if we enter the debugger in the tristate going to
SMP (other CPUs stopped but SMP mode not really started).

Obtained from:Tor.Egge@fast.no
1999-09-25 18:36:31 +00:00
Matt Jacob
7c4bd33778 Fix from Tor so that if we enter the debugger in the tristate going to
SMP (other CPUs stopped but SMP mode not really started).

Obtained from:	Tor.Egge@fast.no
1999-09-25 18:35:38 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Luoqi Chen
cfca102355 Display CPU (BSP) clock speed on SMP systems. 1999-09-22 21:21:53 +00:00
Bill Paul
1088f6c7c1 Spruce up the ADMtek driver: conver to newbus, miibus and add support
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).

Also updated various documentation to mention the AN985 and created
a loadable module.

I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
1999-09-22 05:07:51 +00:00
Poul-Henning Kamp
163473ebd5 Print out flags value 1999-09-21 10:51:47 +00:00
Matthew Dillon
4cc712004c Fix bug in pipe code relating to writes of mmap'd but illegal address
spaces which cross a segment boundry in the page table.  pmap_kextract()
    is not designed for access to the user space portion of the page
    table and cannot handle the null-page-directory-entry case.

    The fix is to have vm_fault_quick() return a success or failure which
    is then used to avoid calling pmap_kextract().
1999-09-20 19:08:48 +00:00
Bill Paul
ae3b8c19b1 Convert the VIA Rhine driver to miibus. 1999-09-19 22:03:31 +00:00
Brian Feldman
49c684571a Correction: mem.c devices are "D_MEM" (and D_MEM is added.)
Taken issue with by:	phk
1999-09-12 18:48:07 +00:00
Brian Feldman
4871de2f17 Mainly stylistic fixes:
1. return( -> return (
	2. inappropriate ENODEV -> ENOTTY
	3. some unreachable cases removed
1999-09-12 16:44:07 +00:00
Brian Feldman
1a351c9ee4 Make the d_flags of mem devices D_DISK to signify that they are disk-like
random-seekable devices. This lets dd(1) know it can seek on them. It
also affects spec_vnopen() (IIRC), but only makes the path of execution smaller,
and does not change its behavior. This is when securelevel >= 2.
1999-09-12 16:38:43 +00:00
Mike Smith
03c6be5cdc Some PnP BIOSsen return garbage in the high byte of the number-of-devices
field (or don't set the high byte at all).  Clear it to avoid reporting
a silly number of devices.

Reported by:	phk
1999-09-12 06:58:33 +00:00
Peter Wemm
1a16554b8f Make pmap_mapdev() deal with non-page-aligned requests.
Add a corresponding pmap_unmapdev() to release the KVM back to kernel_map.
1999-09-11 20:31:32 +00:00
Justin T. Gibbs
0e9857132a Add the AMD driver. 1999-09-11 16:05:48 +00:00
Poul-Henning Kamp
00cd7a584a System clock don't update, because C6's TSC stop count up when run
HALT instruction.

PR:		13683
Submitted by:	IMAI Takeshi <take-i@ceres.dti.ne.jp>
Reviewed by:	phk
1999-09-10 20:45:50 +00:00
Peter Wemm
ebb30c0b3a Add the CR4 values for P3 SIMD enabling support. FXSR tells the cpu that
the OS does FXSAVE/FXRESTOR instructions (fast FPU save/restore) during
context switching and also enables SIMD since this enables saving the
extra CPU context that isn't saved with normal FPU regs.  The other
enables the SIMD instructions to use exception 16 (FPU) error reporting.
Note, this doesn't turn on SIMD, just defines the bits.
1999-09-10 15:51:44 +00:00
Peter Wemm
594898d458 Add text for the PN (Processor serial number) and XMM (extended SIMD/MMX2/
support), as well as a bunch of comments for what the various bits mean
(those that I remember anyway).
1999-09-10 15:47:54 +00:00
Mike Smith
c3c011f933 Look for the right ACPI signature.
Submitted by:	dfr
1999-09-10 08:49:19 +00:00
Mike Smith
97ecdb1d58 Invoke smp_rendezvous_action() using the a.out compatible asnames.h
technique (bleagh).
1999-09-10 01:17:01 +00:00
Peter Wemm
c6a5d1a636 Seperate the miibus pci ethernet drivers from the non-miibus drivers so
it's a little clearer which is which from just looking at GENERIC.
1999-09-09 18:30:58 +00:00
Luoqi Chen
ab6ec55891 Save %gs in sigcontext when delivering a signal and restore them upon
return (in signal trampoline code). I plan to do the same on -stable,
so that we have a consistent interface to userland applications.

Reviewed by:	bde
1999-09-07 20:02:24 +00:00
Warner Losh
19032f4b33 Add pccard child to nexus. A better version would take care of this
with an identify method, but that has not been implemented.

Forgotten by: imp
1999-09-06 06:39:17 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
Peter Wemm
05385ecdf7 Set up FPU state on the AP.
Tested by:	phk
1999-09-05 20:17:40 +00:00
Matthew N. Dodd
7612e4c122 This adds the i386 specific support for systems with a MicroChannel
Architecture bus.

Reviewed by: msmith
1999-09-03 02:04:28 +00:00
Luoqi Chen
7a2bb3b800 Some reorganization of sysarch() interface:
1. Move definitions of struct i386_*_args to the header file sysarch.h,
   since they are part of the sysarch API. struct i386_get_ldt_args and
   i386_set_ldt_args were identical, therefore make them into one
   struct i386_ldt_args. Libc should use these definitions as well.
2. Return a more sensible EOPNOTSUPP for unknown operations.

Reviewed by:	marcel
1999-09-02 20:59:50 +00:00
Peter Wemm
6c233a7138 Update for new pnp includes 1999-09-02 05:37:25 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Jordan K. Hubbard
3dd1fb6608 Try and commit the tun comment fix again; I have no idea why there
was a clash the last time, leading me to think that it had already
been fixed.
1999-09-01 09:01:54 +00:00
Peter Wemm
1be9d26e4a Eliminate some magic numbers. 1999-09-01 06:34:24 +00:00
Brian Somers
3e5eed686b ppp(1) -> ppp(8) 1999-09-01 00:51:23 +00:00
Mike Smith
ac3595b017 Make the error return from mem_range_attr_get actually do something useful
(return an error to the caller)
1999-08-31 01:00:30 +00:00
Mike Smith
4af396a52d Check that there is memory range support before attempting to perform such
an operation, as a kernel client may not have previously checked the CPU
type (it may not be able to).

Also correct the function declaration style for the mem_range functions to
match the rest of this file (oops).

Submitted by:	gibbs
1999-08-30 22:13:28 +00:00
Poul-Henning Kamp
10af1a2b5f We don't need to pass the diskname argument all over the diskslice/label
code, we can find the name from any convenient dev_t
1999-08-28 14:33:44 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Jonathan Lemon
7e42e2f811 Reference the correct gdt[] entry on SMP. Remove the `generation' flag,
and always reload the selectors for every bios call.
1999-08-27 19:39:20 +00:00
Peter Wemm
399f34180a Use .p2align to ensure consistant a.out/elf alignment. I'd have used
SUPERALIGN_TEXT, but this is inline assembler and after cpp has run.
Inspired by bde's comments on linux_locore.s.
1999-08-25 23:50:03 +00:00
Mike Smith
68b7d21a4a Rename 'bios_jmp' to 'bios16_jmp' to make it clear what it's related to. 1999-08-25 06:56:37 +00:00
Peter Wemm
857c0cefe0 Use the far jump for the base of the page arithmatic rather than the
calling function, otherwise Bad Things Happen(tm) when bios16_call is
not in the same page as bios_jmp.

Reviewed by:  msmith
1999-08-25 06:44:32 +00:00
Mike Smith
e6a80efcdd Work around a bad design in some PnP BIOS code whereby the BIOS can reach
off the top of our constructed stack segment while it's trying to copy a
maximally-sized PnP argument frame around.
1999-08-24 16:42:08 +00:00
Alan Cox
4bffe072c4 Cosmetic: Correct the Id string.
Submitted by:	Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
1999-08-24 06:54:20 +00:00
Bruce Evans
917210006a Fixed a misplaced cast to uintptr_t. Cosmetic.
Use device_get_nameunit() instead of rolling our own.
1999-08-24 00:22:10 +00:00
Bruce Evans
709db0871d `bootdev' is an ordinary u_long, so don't cast it to a pointer to print it.
gcc warns about the cast on i386's with 64-bit longs.

Print `bootdev' in all cases when we bail out because it is unreasonable.
1999-08-23 23:42:00 +00:00
Poul-Henning Kamp
845e0781ec Now that we can bind cdevsw to the individual dev_t, divorce the PERFMON
stuff from mem.c.  If PERFMON is there, it will "steal" a minor from
mem.c, but mem.c doesn't need to know about this.

Fixed type of cmd argument in perfmon_ioctl().
1999-08-23 21:34:23 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Peter Wemm
80e6247e72 The nexus_attach() code works a lot better if it's actually connected to
the device methods... Also, don't fail to add eisa/isa because a previous
device failed to attach.
1999-08-23 19:23:33 +00:00
Alan Cox
a236cb64a9 Modify the macros IMASK_UNLOCK, CPL_UNLOCK, and REL_FAST_INTR_LOCK
to perform the s_unlock inline.
1999-08-23 19:14:18 +00:00
Peter Wemm
a5a9efa92b The previous fix didn't do anything if you didn't have pnp. The ICU
macros are only called in the !APIC_IO case, include icu.h there.
1999-08-22 23:49:00 +00:00