If the bootpool does not start at the first sector of the BSD partition
then zfsldr seeks to the wrong offset inside the ZFS vdev label, and is
unable to find zfsboot, so the system does not boot
If 4k alignment is requested, align the BSD partition in the MBR table,
and align the swap and data pool, but the bootpool must start at sector 1
While here, if 4k alignment is requested, disable MBR CHS alignment, as
this results in not-4k aligned partitions.
Reported by: Alex Wilkinson
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
The Dell Precision Tower 5810 fails to boot from GPT in Legacy/BIOS mode
without the Active flag in the Protective MBR. Suggest the workaround
during installation.
Since an increasing number of Dell systems exhibit this behavior,
I imagine all Dells past a certain date will do so. I would like
to suggest the workaround for all Dells with a BIOS date of, say,
2014 or later, but I would need to test a variety of systems before
committing such a change.
Reviewed by: allanjude, dteske
MFC after: 5 days
Relnotes: We should probably suggest using GPT+Active on "recent" Dells.
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D4075
rpcbind/check_bound.c
Fix CID1347798, a memory leak in mergeaddr.
rpcbind/tests/addrmerge_test.c
Fix CID1347800 through CID1347803, memory leaks in ATF tests. They
are harmless because each ATF test case runs in its own process, but
they are trivial to fix. Fix a few other leaks that Coverity didn't
detect, too.
Coverity CID: 1347798, 1347800, 1347801, 1347802, 1347803
MFC after: 2 weeks
X-MFC-With: 293229
Sponsored by: Spectra Logic Corp
This commit, fix a core dump on ypldap(8) related with memory allocation.
Also an example of how to set the ypldap.conf(5) properly is added to
examples files.
A new user _ypldap is required to be able to run ypldap(8) as well as
in a chroot mode.
Reviewed by: rodrigc (mentor), bjk
Approved by: bapt (mentor)
Relnotes: Yes
Sponsored by: gandi.net
Differential Revision: https://reviews.freebsd.org/D4744
Similar fix was done for passwd and group operations in r285050. When a
temporary file is created and then renamed to replace official file there
are no checks to make sure data was written to disk and if a power cycle
happens at this time, system can end up with a 0 length file
Approved by: bapt
MFC after: 1 week
Sponsored by: Netgate
Differential Revision: https://reviews.freebsd.org/D2982
If you are getting your users/groups from a directory service such
as LDAP or AD it's possible for those usernames or groupnames to
contain spaces.
Submitted by: Sean E. Fagan
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: iXsystems
Fix a bug in rpcbind for multihomed hosts. If the server had interfaces on
two separate subnets, and a client on the first subnet contacted rpcbind at
the address on the second subnet, rpcbind would advertise addresses on the
first subnet. This is a bug, because it should prefer to advertise the
address where it was contacted. The requested service might be firewalled
off from the address on the first subnet, for example.
usr.sbin/rpcbind/check_bound.c
If the address on which a request was received is known, pass that
to addrmerge as the clnt_uaddr parameter. That is what addrmerge's
comment indicates the parameter is supposed to mean. The previous
behavior is that clnt_uaddr would contain the address from which the
client sent the request.
usr.sbin/rpcbind/util.c
Modify addrmerge to prefer to use an IP that is equal to clnt_uaddr,
if one is found. Refactor the relevant portion of the function for
clarity, and to reduce the number of ifdefs.
etc/mtree/BSD.tests.dist
usr.sbin/rpcbind/tests/Makefile
usr.sbin/rpcbind/tests/addrmerge_test.c
Add unit tests for usr.sbin/rpcbind/util.c:addrmerge.
usr.sbin/rpcbind/check_bound.c
usr.sbin/rpcbind/rpcbind.h
usr.sbin/rpcbind/util.c
Constify some function arguments
Reviewed by: imp
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4690
- Rework MANIFEST generation and parsing via bsdinstall(8).
- Allow selecting debugging distribution sets during install.
- Rework bsdinstall(8) to fetch remote debug distribution sets
when they are not available on the local install medium.
- Allow selecting additional non-GENERIC kernels during install.
At present, GENERIC is still required, and installed by default.
Tested with: head@r293203
Sponsored by: The FreeBSD Foundation
Set _PATH_DEFPATH to
/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin. This is the
path in the default class in the default /etc/login.conf,
excluding ~/bin which would not be expanded properly in a string
constant.
For normal logins, _PATH_DEFPATH is overridden by /etc/login.conf,
~/.login_conf or shell startup files. _PATH_DEFPATH is still used as a
default by execlp(), execvp(), posix_spawnp() and sh if PATH is not set, and
by cron. Especially the latter is a common trap (most recently in PR
204813).
PR: 204813
Reviewed by: secteam (delphij), alfred
When gssd exits it leaves the kernel state set by
gssd_syscall(). nfsd sees this and waits endlessly
in an unkillable state for gssd to come back. If you
had acidentally started gssd then stopped it, then
started nfsd you'd be in a bad way until you either
restarted gssd or rebooted the system. This change
fixes that by setting the kernel state to "" when
gssd exits.
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: iXsystems
This is rather pedantic, as for most architectures it holds that
sizeof(type *) == sizeof(type **)
Found by: clang static analyzer
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D4722
dp that opens the database with PERM_INSECURE, so we need to check sdp->put
against sdp instead of use dp->put.
PR: bin/191720
Submitted by: Miles Ohlrich <turingsboy@yahoo.com>
Approved by: rodrigc (mentor)
Differential Revision: https://reviews.freebsd.org/D4255
if the memory wasn't allocated again later on
Reported by: Coverity
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
