This directory will hold i386-specific headers that are needed for
-m32 support on amd64 and where the amd64 and i386 cases have too
little in common for combining them to make sense. Files to be
installed will come in later commits.
With the currently required set of files, this could be done with
another INCGROUP in include/Makefile, but at least one file that
might want -m32 support (ieeefp.h) conflicts with a files installed
in /usr/include.
Reviewed by: jhb, imp
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Install headers from LLVM's libunwind in place of the headers from
libcxxrt and allow C applications to use the library.
As part of this, remove include/unwind.h and switch libthr over to
using the installed unwind.h.
Reviewed by: dim, emaste
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D34065
I tested the original commit as part of a series that culminates in
removing this header and installing LLVM libunwind's unwind.h in its
place so missed updating this header as was done in b84693501a.
Pointy hat to: jhb
Reported by: kevans
Fixes: 3a502289d3 Use uintptr_t for return type of _Unwind_GetCFA.
This matches the type in other unwind headers (LLVM libunwind,
libcxxrt, glibc).
NB: include/unwind.h is not installed but is only used by libthr
Reviewed by: imp, dim, emaste
Differential Revision: https://reviews.freebsd.org/D34049
Through fixes and improvements our ipfilter sources have diverged
enough to warrant move from contrib into sys/netpil. Now that I'm
planning on implementing MSS clamping as in iptables it makes more
sense to move ipfilter to netpfil.
This is the first of three commits the ipfilter move.
Suggested by glebius on two occaions.
Suggested by and discussed with: glebius
Reviewed by: glebius, kp (for #network)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33510
Add two underscore characters "__" to names of BIT_* and BITSET_*
macros to move them to the implementation name space and to prevent
a name space pollution due to BIT_* macros in 3rd party programs with
conflicting parameter signatures.
These prefixed macro names are used in kernel header files to define
macros in e.g. sched.h, sys/cpuset.h and sys/domainset.h.
If C programs are built with either -D_KERNEL (automatically passed
when building a kernel or kernel modules) or -D_WANT_FREENBSD_BITSET
(or this macros is defined in the source code before including the
bitset macros), then all macros are made visible with their previous
names, too. E.g., both __BIT_SET() and BIT_SET() are visible with
either of _KERNEL or _WANT_FREEBSD_BITSET defined.
The main reason for this change is that some 3rd party sources
including sched.h have been found to contain conflicting BIT_*
macros.
As a work-around, parts of shed.h have been made conditional and
depend on _WITH_CPU_SET_T being set when sched.h is included.
Ports that expect the full functionality provided by sched.h need
to be built with -D_WITH_CPU_SET_T. But this leads to conflicts if
BIT_* macros are defined in that program, too.
This patch set makes all of sched.h visible again without this
parameter being passed and without any name space pollution due
to BIT_* macros becoming visible when sched.h is included.
This patch set will be backported to the STABLE branches, but ports
will need to use -D_WITH_CPU_SET_T as long as there are supported
releases that do not contain these patches.
Reviewed by: kib, markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33235
Namely posix_spawn_file_actions_addclosefrom_np, in the form it is
provided by glibc.
Reviewed by: kevans, ngie (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33143
Instead of only hiding cpu_set_t compat typedef itself.
Too many software packages assume that sched_getaffinity() presence
implies full source compatibility with glibc. We can (and should)
handle missing CPU_* macros, but then there are incompatible BIT_* uses
which cannot be fixed in src/.
So hide everything under _WITH_CPU_SET_T, in particular, do not expose
sched_getcpu(), sched_get/setaffinity(), as well as CPU_* and BIT_*
macros. Consumers that want sched* functions must opt-in.
Reported by: portmgr (antoine)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for compatibility with Linux.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32901
for compatibility with Linux.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32901
It is required by IEEE Std 1003.1-2008 AKA POSIX.
Put some Linux compatibility stuff under BSD_VISIBLE namespace, in
particular, sys/cpuset.h definitions. Also, if user really want
Linux compatibility, she can request cpu_set_t typedef with
_WITH_CPU_SET_T define.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32901
The clearenv(3) function allows us to clear all environment
variable in one shot. This may be useful for security programs that
want to control the environment or what variables are passed to new
spawned programs.
Reviewed by: scf, markj (secteam), 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D28223
The change implements cexpl() for both ld80 and ld128 architectures.
Testing was done on x86_64 and aarch64 systems.
Along the way sincos[fl]() use an optimization that reduces the argument
to being done one rather than twice. This optimization actually pointed
to a bug in the ld128 version of sincosl(), which is now fixed. In
addition, the minmax polynomial coefficients for sincosl() have been
updated.
A concise log of the file-by-file changes follows.
* include/complex.h:
. Add a prototype for cexpl().
* lib/msun/Makefile:
. Add s_cexpl.c to the build.
. Setup a link for cexpl.3 to cexp.3.
* lib/msun/Symbol.map:
. Expose cexpl symbol in libm shared library.
* lib/msun/ld128/s_cexpl.c:
* Implementation of cexpl() for 128-bit long double architectures.
Tested on an aarch64 system.
* lib/msun/ld80/s_cexpl.c:
* Implementation of cexpl() for Intel 80-bit long double.
* lib/msun/man/cexp.3:
. Document cexpl().
* lib/msun/man/complex.3:
. Add a BUGS section about cpow[fl].
* lib/msun/src/s_cexp.c:
. Include float.h for weak references on 53-bit long double targets.
. Use sincos() to reduce argument reduction cost.
* lib/msun/src/s_cexpf.c:
. Use sincosf() to reduce argument reduction cost.
* lib/msun/src/k_sincosl.h:
. Catch up with the new minmax polynomial coefficients for the kernel for
the 128-bit cosl() implementation.
. BUG FIX: *cs was used where *sn should have been. This means that sinl()
was no computed correctly when iy != 0.
* lib/msun/src/s_cosl.c:
. Include fpmath.h to get access to IEEEl2bits.
. Replace M_PI_4 with pio4, a 64-bit or 113-bit approximation for pi / 4.
PR: 216862
MFC after: 1 week
Current POSIX standard requires fork() to be async-signal safe. Neither
our implementation, nor implementations in other operating systems are,
and practically it is impossible to make fork() async-signal safe without
too much efforts. Also, that would put undue requirement that all atfork
handlers should be async-signal safe as well, which contradicts its main
use.
As result, Austin Group dropped the requirement, and added a new function
_Fork() that should be async-signal safe, but it does not call atfork
handlers. Basically, _Fork() can be implemented as a raw syscall.
Release of glibc 2.34 added _Fork(), do the same for FreeBSD.
Clarify threading behavior for fork() in the manpage.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31378
Attempt to comply with the strict namespace pollution requirements of
_POSIX_C_SOURCE. Add guards to limit visitbility of CLOCK_ and TIMER_
defines as appropriate. Only define the CLOCK_ variables relevant to the
specific standards. Move all the sharing to sys/_clock_id.h and make
time.h and sys/time.h both include that rather than copy due to the
now large number of clocks and compat defines.
Please note: The old time.h previously used these newer dates:
CLOCK_REALTIME 199506
CLOCK_MONOTONIC 200112
CLOCK_THREAD_CPUTIME_ID 200112
CLOCK_PROCESS_CPUTIME_ID 200112
but glibc defines all of these for 199309. glibc uses this date for all
these values, however, only CLOCK_REALTIME was in IEEE 1003.1b. Add a
comment about this to document it. A large number of programs and
libraries assume that these will be defined for _POSIX_C_SOURCE =
199309.
In addition, leak CLOCK_UPTIME_FAST for the pocl package until it can be
updated to use a simple CLOCK_MONOTONIC.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31056
Finally, we have the correct function definition for strmode. NetBSD/OpenBSD
did this many years ago. This code is weird sign extension safe.
Reviewed by: imp@
Pull Request: https://github.com/freebsd/freebsd-src/pull/493
Many of these typedefs are the same across all architectures or can
be set based on an architecture-independent compiler-provided macro
(e.g. __SIZEOF_SIZE_T__). These macros have been available since GCC 4.6
and Clang sometime before 3.0 (godbolt.org does not have any older clang
versions installed).
I originally considered using the compiler-provided `__FOO_TYPE__` directly.
However, in order to do so we have to check that those match the previous
typedef exactly (not just that they have the same size) since any change
would be an ABI break. For example, changing `long` to `long long` results
in different C++ name mangling. Additionally, Clang and GCC disagree on
the underlying type for some of (u)int*_fast_t types, so this change
only moves the definitions that are identical across all architectures
and does not touch those types.
This de-deduplication will allow us to have a smaller diff downstream in
CheriBSD: we only have to only change the (u)intptr_t definition in
sys/_types.h in CheriBSD instead of having to change machine/_types.h for
all CHERI-enabled architectures (currently RISC-V, AArch64 and MIPS).
Reviewed By: imp, kib
Differential Revision: https://reviews.freebsd.org/D29895
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
After length decisions, we've decided that the if_wg(4) driver and
related work is not yet ready to live in the tree. This driver has
larger security implications than many, and thus will be held to
more scrutiny than other drivers.
Please also see the related message sent to the freebsd-hackers@
and freebsd-arch@ lists by Kyle Evans <kevans@FreeBSD.org> on
2021/03/16, with the subject line "Removing WireGuard Support From Base"
for additional context.
We cannot easily used the TAG here and we don't yet have something to install
even .h from a diretory in bsd.prog.mk
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29170
MFC after: 2 weeks
headers could be installed as symlink to the source tree instead of copies.
Remove the possibility to do that.
This make the makefile easier to read and to maintain and also don't duplicate
code.
While here remove some directories from LSBUDIRS as we already install them using
the INCS stuff.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29167
MFC after: 2 weeks
Now they are correctly taggued and put into the -dev package
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29166
MFC after: 2 weeks
Now they are correctly taggued and put them into the libbsm package
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29165
MFC after: 2 weeks
This is the culmination of about a week of work from three developers to
fix a number of functional and security issues. This patch consists of
work done by the following folks:
- Jason A. Donenfeld <Jason@zx2c4.com>
- Matt Dunwoodie <ncon@noconroy.net>
- Kyle Evans <kevans@FreeBSD.org>
Notable changes include:
- Packets are now correctly staged for processing once the handshake has
completed, resulting in less packet loss in the interim.
- Various race conditions have been resolved, particularly w.r.t. socket
and packet lifetime (panics)
- Various tests have been added to assure correct functionality and
tooling conformance
- Many security issues have been addressed
- if_wg now maintains jail-friendly semantics: sockets are created in
the interface's home vnet so that it can act as the sole network
connection for a jail
- if_wg no longer fails to remove peer allowed-ips of 0.0.0.0/0
- if_wg now exports via ioctl a format that is future proof and
complete. It is additionally supported by the upstream
wireguard-tools (which we plan to merge in to base soon)
- if_wg now conforms to the WireGuard protocol and is more closely
aligned with security auditing guidelines
Note that the driver has been rebased away from using iflib. iflib
poses a number of challenges for a cloned device trying to operate in a
vnet that are non-trivial to solve and adds complexity to the
implementation for little gain.
The crypto implementation that was previously added to the tree was a
super complex integration of what previously appeared in an old out of
tree Linux module, which has been reduced to crypto.c containing simple
boring reference implementations. This is part of a near-to-mid term
goal to work with FreeBSD kernel crypto folks and take advantage of or
improve accelerated crypto already offered elsewhere.
There's additional test suite effort underway out-of-tree taking
advantage of the aforementioned jail-friendly semantics to test a number
of real-world topologies, based on netns.sh.
Also note that this is still a work in progress; work going further will
be much smaller in nature.
MFC after: 1 month (maybe)
All supported platforms support thread-local vars and __thread.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28796
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Using a shell for loop means we have to spawn a separate install(1)
process for each header that is symlinked. This patch uses printf(1) to
generate an argument list that has been prefixed with the correct number
of ../ and then uses a single install(1) invocation.
This reduces the number of execve() calls during make includes from 2442
(with D27622) to 1382. Running `make symlinks` in include/ now spawns 214
processes instead of 1276 without this patch.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D27723
Instead of using install directly use INCSGROUPS for them.
All those files are the ones we installed when the directory have more .h
files that we don't want to install so they aren't using the LSUBDIR stuff.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D27612
These functions get/set tty winsize respectively, and are trivial wrappers
around corresponding termio ioctls.
The functions are expected to be a part of POSIX.1 issue 8:
https://www.austingroupbugs.net/view.php?id=1151#c3856.
They are currently available in NetBSD and in musl libc.
PR: 251868
Submitted by: Soumendra Ganguly <soumendraganguly@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27650
Third-party code tests for strerror_l(3) without specifying
_POSIX_SOURCE, and then expects that the function is prototyped with
_POSIX_SOURCE set to 200112.
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
