Mechanically cleanup INP_TIMEWAIT from the kernel sources. After
0d7445193a, this commit shall not cause any functional changes.
Note: this flag was very often checked together with INP_DROPPED.
If we modify in_pcblookup*() not to return INP_DROPPED pcbs, we
will be able to remove most of this checks and turn them to
assertions. Some of them can be turned into assertions right now,
but that should be carefully done on a case by case basis.
Differential revision: https://reviews.freebsd.org/D36400
The memory savings the tcptw brought back in 2003 (see 340c35de6a) no
longer justify the complexity required to maintain it. For longer
explanation please check out the email [1].
Surpisingly through almost 20 years the TCP stack functionality of
handling the TIME_WAIT state with a normal tcpcb did not bitrot. The
existing tcp_input() properly handles a tcpcb in TCPS_TIME_WAIT state,
which is confirmed by the packetdrill tcp-testsuite [2].
This change just removes tcptw and leaves INP_TIMEWAIT. The flag will
be removed in a separate commit. This makes it easier to review and
possibly debug the changes.
[1] https://lists.freebsd.org/archives/freebsd-net/2022-January/001206.html
[2] https://github.com/freebsd-net/tcp-testsuite
Differential revision: https://reviews.freebsd.org/D36398
When system acts as CARP BACKUP ignore received IPv6 Neighbor Advertisements
to ensure that neighbor cache will not be changed.
Also do not send IPv6 Neighbor Solicitation from CARP BACKUP source address.
Such packets can confuse network switch and it detects MAC addresses
flapping.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D36649
In the original design of the network stack from the protocol control
input method pr_ctlinput was used notify the protocols about two very
different kinds of events: internal system events and receival of an
ICMP messages from outside. These events were coded with PRC_ codes.
Today these methods are removed from the protosw(9) and are isolated
to IPv4 and IPv6 stacks and are called only from icmp*_input(). The
PRC_ codes now just create a shim layer between ICMP codes and errors
or actions taken by protocols.
- Change ipproto_ctlinput_t to pass just pointer to ICMP header. This
allows protocols to not deduct it from the internal IP header.
- Change ip6proto_ctlinput_t to pass just struct ip6ctlparam pointer.
It has all the information needed to the protocols. In the structure,
change ip6c_finaldst fields to sockaddr_in6. The reason is that
icmp6_input() already has this address wrapped in sockaddr, and the
protocols want this address as sockaddr.
- For UDP tunneling control input, as well as for IPSEC control input,
change the prototypes to accept a transparent union of either ICMP
header pointer or struct ip6ctlparam pointer.
- In icmp_input() and icmp6_input() do only validation of ICMP header and
count bad packets. The translation of ICMP codes to errors/actions is
done by protocols.
- Provide icmp_errmap() and icmp6_errmap() as substitute to inetctlerrmap,
inet6ctlerrmap arrays.
- In protocol ctlinput methods either trust what icmp_errmap() recommend,
or do our own logic based on the ICMP header.
Differential revision: https://reviews.freebsd.org/D36731
Now these functions are called only from icmp*_input(). The pointer
to the ICMP data is never NULL and cmd has a limited set of values.
In the past the functions were demultiplexing control messages from
ICMP layer, as well as internally generated events. In the latter
case the the pointer to IP would be NULL.
Differential revision: https://reviews.freebsd.org/D36729
and mark those PRC_* codes, that are used. The rest are dead code.
This is not a functional change, but illustrative to make easier
review of following changes.
After decoupling of protosw(9) and IP wire protocols in 78b1fc05b2 for
IPv4 we got vector ip_ctlprotox[] that is executed only and only from
icmp_input() and respectively for IPv6 we got ip6_ctlprotox[] executed
only and only from icmp6_input(). This allows to use protocol specific
argument types in these methods instead of struct sockaddr and void.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36727
The netinet/ipprotosw.h and netinet6/ip6protosw.h were KAME relics, with
the former removed in f0ffb944d2 in 2001 and the latter survived until
today. It has been reduced down to only one useful declaration that
moves to ip6_var.h
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36726
Summary:
Move SIOCAIFADDR_IN6 (current "primary" ioctl to add an IPv6
interface address) handling code to the dedicated in6_addifaddr()
function and make it a part of KPI. This allows in-kernel users to
add/delete interfaces addresses without relying on ioctl interface.
Subscribers: imp, ae, glebius
Differential Revision: https://reviews.freebsd.org/D36713
It is now unused and not having it allows further clean ups.
Reviewed by: cy, glebius, kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36452
Fix nd6_na_input() eventhandler call: run eventhandler after lle
state transition.
Old behaviour (as seen by event handler):
* fe80::5054:ff:fe8c:63e9 dev vtnet0 lladdr 52:54:00:8c:63:e9 INCOMPLETE
New behaviour:
* fe80::5054:ff:fe8c:63e9 dev vtnet0 lladdr 52:54:00:8c:63:e9 REACHABLE
MFC after: 2 weeks
With 61f7427f02 raw sockets protosw has wildcard pr_protocol. Protocol
of a specific pcb is stored in inp_ip_p.
Reviewed by: karels
Reported by: karels
Differential revision: https://reviews.freebsd.org/D36429
Fixes: 61f7427f02
Since 4.4BSD the protosw was used to implement socket types created
by socket(2) syscall and at the same to demultiplex incoming IPv4
datagrams (later copied to IPv6). This story ended with 78b1fc05b2.
These entries (e.g. IPPROTO_ICMP) in inetsw that were added to catch
packets in ip_input(), they would also be returned by pffindproto()
if user says socket(AF_INET, SOCK_RAW, IPPROTO_ICMP). Thus, for raw
sockets to work correctly, all the entries were pointing at raw_usrreq
differentiating only in the value of pr_protocol.
With 78b1fc05b2 all these entries are no longer needed, as ip_protox
is independent of protosw. Any socket syscall requesting SOCK_RAW type
would end up with rip_protosw. And this protosw has its pr_protocol
set to 0, allowing to mark socket with any protocol.
For IPv6 raw socket the change required two small fixes:
o Validate user provided protocol value
o Always use protocol number stored in inp in rip6_attach, instead
of protosw value, which is now always 0.
Differential revision: https://reviews.freebsd.org/D36380
The divert(4) is not a protocol of IPv4. It is a socket to
intercept packets from ipfw(4) to userland and re-inject them
back. It can divert and re-inject IPv4 and IPv6 packets today,
but potentially it is not limited to these two protocols. The
IPPROTO_DIVERT does not belong to known IP protocols, it
doesn't even fit into u_char. I guess, the implementation of
divert(4) was done the way it is done basically because it was
easier to do it this way, back when protocols for sockets were
intertwined with IP protocols and domains were statically
compiled in.
Moving divert(4) out of inetsw accomplished two important things:
1) IPDIVERT is getting much closer to be not dependent on INET.
This will be finalized in following changes.
2) Now divert socket no longer aliases with raw IPv4 socket.
Domain/proto selection code won't need a hack for SOCK_RAW and
multiple entries in inetsw implementing different flavors of
raw socket can merge into one without requirement of raw IPv4
being the last member of dom_protosw.
Differential revision: https://reviews.freebsd.org/D36379
Construct the desired hexthops directly instead of using the
"translation" layer in form of filling rt_addrinfo data.
Simplify V_rt_add_addr_allfibs handling by using recently-added
rib_copy_route() to propagate the routes to the non-primary address
fibs.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D36166
Summary:
Currently netinet6/ code allocates IPv6 prefixes (nd_prefix) for
both manually-assigned addresses and advertised prefixes. As a result,
prefixes from manually-assigned prefixes can be seen in `ndp -p` list
and be cleared via `ndp -P`. The latter relies on the SIOCSPFXFLUSH_IN6
ioctl to clear to prefix list.
The original intent of the SIOCSPFXFLUSH_IN6 was to clear prefixes
originated from the advertising routers:
```
1998-09-02 JINMEI, Tatuya <jinmei@isl.rdc.toshiba.co.jp>
* nd6.c (nd6_ioctl): added 2 new ioctls; SIOCSRTRFLUSH_IN6 and
SIOCSPFXFLUSH_IN6. The former is to flush all default routers
in the default router list, and the latter is to flush all the
prefixes and the addresses derived from them in the prefix list.
```
Restore the intent by marking prefixes derived from the RA messages
with newly-added ndpr_flags.ra_derived flag and skip prefixes not marked
with such flag during deletion and listing.
Differential Revision: https://reviews.freebsd.org/D36312
MFC after: 2 weeks
o Assert that every protosw has pr_attach. Now this structure is
only for socket protocols declarations and nothing else.
o Merge struct pr_usrreqs into struct protosw. This was suggested
in 1996 by wollman@ (see 7b187005d1), and later reiterated
in 2006 by rwatson@ (see 6fbb9cf860).
o Make struct domain hold a variable sized array of protosw pointers.
For most protocols these pointers are initialized statically.
Those domains that may have loadable protocols have spacers. IPv4
and IPv6 have 8 spacers each (andre@ dff3237ee5).
o For inetsw and inet6sw leave a comment noting that many protosw
entries very likely are dead code.
o Refactor pf_proto_[un]register() into protosw_[un]register().
o Isolate pr_*_notsupp() methods into uipc_domain.c
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36232
The method was called for two different conditions: 1) the VM layer is
low on pages or 2) one of UMA zones of mbuf allocator exhausted.
This change 2) into a new event handler, but all affected network
subsystems modified to subscribe to both, so this change shall not
bring functional changes under different low memory situations.
There were three subsystems still using pr_drain: TCP, SCTP and frag6.
The latter had its protosw entry for the only reason to register its
pr_drain method.
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36164
While here remove recursive network epoch entry in mld_fasttimo_vnet(),
as this function is already in epoch.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36161
Modern TCP stacks uses multiple callouts per tcpcb, and a global
callout is ancient artifact. However it is still used to garbage
collect compressed timewait entries.
Reviewed by: melifaro, tuexen
Differential revision: https://reviews.freebsd.org/D36159
The protosw KPI historically has implemented two quite orthogonal
things: protocols that implement a certain kind of socket, and
protocols that are IPv4/IPv6 protocol. These two things do not
make one-to-one correspondence. The pr_input and pr_ctlinput methods
were utilized only in IP protocols. This strange duality required
IP protocols that doesn't have a socket to declare protosw, e.g.
carp(4). On the other hand developers of socket protocols thought
that they need to define pr_input/pr_ctlinput always, which lead to
strange dead code, e.g. div_input() or sdp_ctlinput().
With this change pr_input and pr_ctlinput as part of protosw disappear
and IPv4/IPv6 get their private single level protocol switch table
ip_protox[] and ip6_protox[] respectively, pointing at array of
ipproto_input_t functions. The pr_ctlinput that was used for
control input coming from the network (ICMP, ICMPv6) is now represented
by ip_ctlprotox[] and ip6_ctlprotox[].
ipproto_register() becomes the only official way to register in the
table. Those protocols that were always static and unlikely anybody
is interested in making them loadable, are now registered by ip_init(),
ip6_init(). An IP protocol that considers itself unloadable shall
register itself within its own private SYSINIT().
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36157
Both UDP and UDP Lite use same methods on sockets. Both UDP over IPv4
and over IPv6 use same methods. Don't pretend that methods can switch
and remove this unneeded complexity.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36154
For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is good reason to get rid of yet another caddr_t in kernel.
Fixes: 886fc1e804
This is expensive and useless call. It has been useless since Alexander
melifaro@ moved the forwarding table to nexthops with passive invalidation.
What happens now is that cached route in a inpcb would get invalidated
on next ip_output().
These were the last users of pfctlinput(), so garbage collect it.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36156
* factor out underlying llentry check into a separate function and use it consistently
* enter epoch once instead of per-router enter/exit
* don't execute body with fibnum = `RT_ALL_FIBS`
Differential Revision: https://reviews.freebsd.org/D35523
MFC after: 2 weeks
The only place to execute this method was raw_usend(). Only those
protocols that used raw socket were able to actually enter that method.
All pr_output assignments being deleted by this commit were a dead code
for many years.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36126
destinations.
The current assumption is that kernel-handled rtadv prefixes along with
the interface address prefixes are the only prefixes considered in
the ND neighbor eligibility code.
Change this by allowing any non-gatewaye routes to be eligible. This
will allow DHCPv6-controlled routes to be correctly handled by
the ND code.
Refactor nd6_is_new_addr_neighbor() to enable more deterministic
performance in "found" case and remove non-needed
V_rt_add_addr_allfibs handling logic.
Reviewed By: kbowling
Differential Revision: https://reviews.freebsd.org/D23695
MFC after: 1 month
* Make nhgrp_get_nhops() return const struct weightened_nhop to
indicate that the list is immutable
* Make nhgrp_get_group() return the actual group, instead of
group+weight.
MFC after: 2 weeks
Currently we accept any pmtu between IPV6_MMTU(1280B) and the link mtu.
In some network topologies could allow a bad actor to perform a DOS attack.
Contrary to IPv4 in IPv6 oversized packets are dropped, and a ICMP
PACKET_TOO_BIG message is sent back to the sender.
After receiving an ICMPv6 packet with pmtu bigger than the
current one the victim will start sending frames that will be dropped
a router with reduced MTU.
Although it will eventually receive another message with correct pmtu,
an attacker can still just inject their spoofed packets frequently
enough to overwrite the correct value.
This issue is described in detail in RFC8201, section 6.
Fix this by checking the current pmtu, and accepting the new one only
if it's smaller.
Approved by: mw(mentor)
Reviewed by: tuexen
MFC after: 1 week
Sponsored by: Stormshield
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D35871
