The HT1000 DMA engine seems to not always like 64K transfers and sometimes barfs data all over memory leading to instant chrash and burn.
Also fix 48bit adressing issues, apparently newer chips needs 16bit writes and not the usual fifo thing.
HW donated by: Travis Mikalson at TerraNovaNet
- make neccessary changes to release offload resources when a syncache
entry is removed before connection establishment
- disable checks for offloaded connection where insufficient information
is available
Reviewed by: silby
register (MacBooks only).
This allows MacBooks to boot in SMP mode without any trick and solves
the timer problems with HZ=1000.
MFC after: 1 week
Reviewed by: njl (mentor), jhb
Approved by: njl (mentor), jhb
Previous value 16 was too small for real LAC as temporal activity
spike cound easily overflow queue demanding tunnel disconnection due
to possible state inconsistency.
that favours true hardware channel, the first instance of recording
request will grab this channel (the first channel is being used as
vchan master). In many cases, it is not really work as intended and give
false impression of broken recording.
PR: kern/118546
MFC after: 3 days
7.2.3, bytes 0-3 and 5-15 are used to calculate the checksum of a descriptor
tag.
PR: kern/90521
Submitted by: Björn König <bkoenig@cs.tu-berlin.de>
Reviewed by: scottl
Approved by: emax (mentor)
header, then don't try to pullup anything, because there is no next
header if we hit IPPROTO_NONE. Set ulp to a non-NULL value so the
search for an upper layer header terinates.
This is based on Pekka's diagnosis, but I chose a simpler fix.
PR: 115261
Submitted by: Pekka Savola <pekkas@netcore.fi>
Reviewed by: mlaier
MFC after: 2 weeks
Ethernet Controller. Multicast filtering wasn't tested and needs more
expore. While I'm here change complex if statements with switch
statement which would improve readability.
Reported by: Abdullah Ibn Hamad Al-Marri < wearabnet AT yahoo DOT ca >
Tested by: Abdullah Ibn Hamad Al-Marri < wearabnet AT yahoo DOT ca >
pass back the desired buffer length. This fixes scanning with the Marvell
88W8335 and BCM4328 wireless cards.
PR: kern/118370
Submitted by: Weongyo Jeong
Tested by: Ed Schouten
the sent_queue. Sometimes I wonder why any code
ever works :-)
- Fix the pad of the last mbuf routine, It was working improperly
on non-4 byte aligned chunks which could cause memory overruns.
MFC after: 1 week
by Daniel Kamm.
Adaptec RAID 51245
Adaptec RAID 51645
Adaptec RAID 52445
Adaptec RAID 5405
Sun STK RAID REM
Sun STK RAID EM
SG-XPCIESAS-R-IN
SG-XPCIESAS-R-EX
XXX: This only works currently with GEOM_GPT which only exists in 6.x.
XXX: I didn't add 'mbroffset' support for a GPT partition holding a BSD
label as I'm not sure if they use relative or absolute offsets.
MFC after: 3 days
o Disklabels can have between 8 and 20 partitions (inclusive).
o No device special file is created for the raw partition.
o Switch ia64 to use this backend.
o No support for boot code yet.
- Missing lock when sending data and moving it to the
outqueue.
- If a mbuf alloc fails during moving to outqueue the
reassembly of the old mbuf chain was incorrect.
- some_taken becomes a counter in sctputil.c instead of a set to 1.
- Fix a panic to be only under invarients and have a proper recovery.
- msg_flags needed to be set.to the value collected not or'd.
MFC after: 1 week
initialized before use and returned integrally instead of up to size.
Submitted by: Ilja van Sprundel <ilja -at- netric.org>
Reviewed by: secteam
MFC after: 1 day
on 1/2 of each of the successive limits tied to the limit for
2k clusters.
- Adds real functionality in so that doing a sysctl to change these
actually changes them :-)
MFC after: 1 week
when applicable.
Aquire Giant slightly later for vnlru.
In the syncer, aquire the Giant only when a vnode belongs to the
non-MPsafe fs.
In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from
the lbolt sleep queue after the syncer state is modified, not before.
Herded by: attilio
Tested by: Peter Holm
Reviewed by: ups
MFC after: 1 week
This makes updates mounts such as:
"mount -u -o rdonly" work more like, "mount -u -o ro".
References to "-o rdonly" were changed to "-o ro" in revision 1.60 of
the mount(8) man page,
but some people still like to use "-o rdonly" since it was documented
in earlier versions of FreeBSD.
Requested by: rwatson
MFC after: 1 week
within the jail are never freed. si_cred is only used by the MAC framework so
make the cred reference conditional on it being compiled in, this is not a fix
and will need to be reviewed for any new consumers of si_cred.
This will quell some user complaint when using jails with a default kernel.
Reviewed by: rwatson
MFC after: 3 days
INCLUDE_CONFIG_FILE. Make a user to look at what config(8) actually does,
and how can one fetch actual configuration file.
Reported by: many
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
is what gcc3 complains about.
Without this change, it's impossible to build the kernel with gcc3.
Tested by: cognet@ (mentor)
Approved by: cognet@ (mentor)
test incorrect.
- Fix the initial buf calculation to be more friendly, calc is the same
but we use different variable to make it easier amongst the different
code versions.
MFC after: 1 week
sending, once the locks are all unlocked to
do the copy's in, its possible that other
events could then raise the number of bytes
outstanding pushing it so not all the message
would fit. This would then cause us to send
only part of the message. This fix makes it
so we keep a "reserved" amount that can be
kept in mind when making calculations to send.
- rcv msg args with a NULL/NULL for to/tolen will return an error incorrectly
for the 1-2-1 model.
- We were not doing 0 len return correctly and not setting cantrcv more
correctly. Previouly we "fixed" this area by taking out the socantrcv
since we then could not get the data out. The correct rix is to still
flag the socket but alow a by-pass route to continue to read until
all data is consumed.
MFC after: 1 week
with insufficient protection mode.
For the i386 and amd64, create the tunable, machdep.prot_fault_translation,
with the following behaviour:
0 = autodetect the signal to be delivered on KERN_PROTECTION_FAILURE
from vm_fault based on the ELF OSABI note:
no note or __FreeBSD_version < 700004 - SIGBUS/BUS_PAGE_FAULT
note, and __FreeBSD_version >= 700004 - SIGSEGV/SEGV_ACCERR
1 = always SIGBUS/BUS_PAGE_FAULT
2 = always SIGSEGV/SEGV_ACCERR
This would do mostly automatic correction of ABI breakage, with the exception
of the untaged binaries for 7-CURRENT/RELENG_7 before the note is fixed. For
them, sysctl would allow to run the binary with manual settings.
Discussed with: portmgr (kris)
PR: kern/118304
MFC after: 3 days
dereferencing. Unaligned access could cause panic on strict alignment
architectures.
Reviewed by: marcel, marius (also tested on sparc64, thanks !)
MFC after: 3 days
Before this fix, FreeBSD would negotiate SACK on outgoing
connections, but would always fail to negotiate it on incoming
connections.
Discovered by: James Healy and Lawrence Stewart
Submitted by: James Healy and Lawrence Stewart
MFC after: 3 days
attached. Otherwise, the snp->snp_tty would be overwritten, while the
tty line discipline still set to the snpdisc. Then snplwrite() causes
panic because ttytosnp() cannot find the snp.
MFC after: 1 week
support its -k argument:
kern.proc.kstack - dump the kernel stack of a process, if debugging
is permitted.
This sysctl is present if either "options DDB" or "options STACK" is
compiled into the kernel. Having support for tracing the kernel
stacks of processes from user space makes it much easier to debug
(or understand) specific wmesg's while avoiding the need to enter
DDB in order to determine the path by which a process came to be
blocked on a particular wait channel or lock.
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
defined, or also if "options DDB" is defined to provide compatibility
with existing users of stack(9).
Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to. It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.
Update stack(9) man page.
Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
We used to allocate the domains 0-14 for userland, and leave the domain 15
for the kernel. Now supersections requires the use of domain 0, so we
switched the kernel domain to 0, and use 1-15 for userland.
How it's done currently, the kernel domain could be allocated for a
userland process.
So switch back to the previous way we did things, set the first available
domain to 0, and just add 1 to get the real domain number in the struct pmap.
Reported by: Mark Tinguely <tinguely AT casselton DOT net>
MFC After: 3 days
1. A packet comes in that is to be forwarded
2. The destination of the packet is rewritten by some firewall code
3. The next link's MTU is too small
4. The packet has the DF bit set
Then the current code is such that instead of setting the next
link's MTU in the ICMP error, ip_next_mtu() is called and a guess
is sent as to which MTU is supposed to be tried next. This is because
in this case ip_forward() is called with srcrt set to 1. In that
case the ia pointer remains NULL but it is needed to get the MTU
of the interface the packet is to be sent out from.
Thus, we always set ia to the outgoing interface.
MFC after: 2 weeks
The RAS implementation would set the end address, then the start
address. These were used by the kernel to restart a RAS sequence if
it was interrupted. When the thread switching code ran, it would
check these values and adjust the PC and clear them if it did.
However, there's a small flaw in this scheme. Thread T1, sets the end
address and gets preempted. Thread T2 runs and also does a RAS
operation. This resets end to zero. Thread T1 now runs again and
sets start and then begins the RAS sequence, but is preempted before
the RAS sequence executes its last instruction. The kernel code that
would ordinarily restart the RAS sequence doesn't because the PC isn't
between start and 0, so the PC isn't set to the start of the sequence.
So when T1 is resumed again, it is at the wrong location for RAS to
produce the correct results. This causes the wrong results for the
atomic sequence.
The window for the first race is 3 instructions. The window for the
second race is 5-10 instructions depending on the atomic operation.
This makes this failure fairly rare and hard to reproduce.
Mutexs are implemented in libthr using atomic operations. When the
above race would occur, a lock could get stuck locked, causing many
downstream problems, as you might expect.
Also, make sure to reset the start and end address when doing a syscall, or
a malicious process could set them before doing a syscall.
Reviewed by: imp, ups (thanks guys)
Pointy hat to: cognet
MFC After: 3 days
its -f and -v arguments:
kern.proc.filedesc - dump file descriptor information for a process, if
debugging is permitted, including socket addresses, open flags, file
offsets, file paths, etc.
kern.proc.vmmap - dump virtual memory mapping information for a process,
if debugging is permitted, including layout and information on
underlying objects, such as the type of object and path.
These provide a superset of the information historically available
through the now-deprecated procfs(4), and are intended to be exported
in an ABI-robust form.
January 1, 1601. The 1601 - 1970 period was in seconds rather than 100ns
units.
Remove duplication by having NdisGetCurrentSystemTime call ntoskrnl_time.
linker interfaces for looking up function names and offsets from
instruction pointers. Create two variants of each call: one that is
"DDB-safe" and avoids locking in the linker, and one that is safe for
use in live kernels, by virtue of observing locking, and in particular
safe when kernel modules are being loaded and unloaded simultaneous to
their use. This will allow them to be used outside of debugging
contexts.
Modify two of three current stack(9) consumers to use the DDB-safe
interfaces, as they run in low-level debugging contexts, such as inside
lockmgr(9) and the kernel memory allocator.
Update man page.
sx driver), change a magic value in the PLX bridge chip. Apparently later
builds of the PCI cards had corrected values in the configuration eeprom.
This change supposedly fixes some pci bus problems.
information in support of DDB(4); these functions bypass normal linker
locking as they may run in contexts where locking is unsafe (such as the
kernel debugger).
Add a new interface linker_ddb_search_symbol_name(), which looks up a
symbol name and offset given an address, and also
linker_search_symbol_name() which does the same but *does* follow the
locking conventions of the linker.
Unlike existing functions, these functions place the name in a
caller-provided buffer, which is stable even after linker locks have been
released. These functions will be used in upcoming revisions to stack(9)
to support kernel stack trace generation in contexts as part of a live,
rather than suspended, kernel.
gets enabled when INVARIANTS is on instead of DIAGNOSTIC (which apparently
nobody uses). From Tor's description:
This happens when the block range spans two block maps, the first in the
inode (mapping up to NDADDR direct blocks) and the second being the first
indirect block. The current check assumes that both block maps are
indirect blocks.
Work done by: tegge
Tested by: kris, kensmith
in the tcp header. With relevant parts of the tcp header changing after
the 'signature' was computed, the signature becomes invalid.
Reviewed by: tools/regression/netinet/tcpconnect
MFC after: 3 days
Tested by: Nick Hilliard (see net@)
is required by the X.Org PCI domains code and additionally needs
a workaround for Hummingbird and Sabre bridges as these don't
allow their config headers to be read at any width, which is an
unusual behavior.
- In psycho(4) take advantage of DEFINE_CLASS_0 and use more
appropriate types for some softc members.
MFC after: 3 days
hack means you can get the units and flags to match up more easily with
serial consoles on machines with acpi tables that cause the com ports
to be probed in the wrong order (and hence get the wrong sio unit number).
This replaces the common alternative hack of editing the code to comment
out the acpi attachment. This could go away entirely when device wiring
patches are committed.
stomping on the units intended for the motherboard sio ports. This is
no real substitute for the not-yet-committed device wiring enhancements.
Code taken from sio's pci attachment.
allocation fails and pv entries are reclaimed, there may be an unused pv
entry in a pv chunk that survived the reclamation. However, previously,
after reclamation, get_pv_entry() did not look for an unused pv entry in
a surviving pv chunk; it simply retried the page allocation. Now, it
does look for an unused pv entry before retrying the page allocation.
Note: This only applies to RELENG_7. Earlier branches use a different
pv entry allocator.
MFC after: 6 weeks
Intel CPUs with family 0x6, model 0xE and later (i.e., Intel Core(TM))
have a PMC architecture that differs somewhat from previous CPUs in
family 0x6. Even though the basic programming model is similar, the
documented set of legal values that may be loaded into their PMC MSRs
differs from that of the previous PMCs in family 0x6 and reusing bit
values valid for the older PMCs could result in undefined behaviour in
the general case.
per-cpu area. cp_time[] goes away and a new function creates a merged
cp_time-like array for things like linprocfs, sysctl etc. The
atomic ops for updating cp_time[] in statclock go away, and the scope
of the thread lock is reduced.
sysctl kern.cp_time returns a backwards compatible cp_time[] array.
A new kern.cp_times sysctl returns the individual per-cpu stats.
I have pending changes to make top and vmstat optionally show per-cpu
stats.
I'm very aware that there are something like 5 or 6 other versions "out
there" for doing this - but none were handy when I needed them.
I did merge my changes with John Baldwin's, and ended up replacing a
few chunks of my stuff with his, and stealing some other code.
Reviewed by: jhb
Partly obtained from: jhb
since the branch caches on at least Athlon XP through Athlon 64 CPU's
don't understand such instructions and guarantee a cache miss taking
at least 10 cycles. Use the documented workaround "ret $0" instead
("nop; ret" also works, but "ret $0" is probably faster on old CPUs).
Normal code (even asm code) doesn't branch to "ret", since there is
usually some cleanup to do, but the __mcount, .mcount and .mexitcount
entry points were optimized too well to have the minimum number of
instructions (3 instructions each if profiling is not enabled) and
they did this. I didn't see a significant number of cache misses for
.mexitcount, but for the shared "ret" for __mcount and .mcount I
observed cache misses costing 26 cycles each. For a send(2) syscall
that makes about 70 function calls, the cost of these cache misses
alone increased the syscall time from about 4000 cycles to about 7000
cycles. 4000 is for a profiling (GUPROF) kernel with profiling disabled;
after this fix, configuring profiling only costs about 600 cycles in the
4000, which is consistent with almost perfect branch prediction in the
mcounting calls.
unused except to obfuscate disassemblies. -mprofiler-epilogue is
currently with gcc-4 (it does too little), but -finstrument-functions
is broken in a different way (it does too much).
amd64 version: meger whitespace fixes from i386 version.
Call uma_sel_align() there at well.
Set CPU_CONTROL_VECRELOC if we're using the high vectors page.
Submitted by: Rafal Jaworowski <raj AT semihalf DOT com>
MFC After: 1 week
bpf will see inner and outer headers or just inner or outer
headers for incoming and outgoing IPsec packets.
This is useful in bpf to not have over long lines for debugging
or selcting packets based on the inner headers.
It also properly defines the behavior of what the firewalls see.
Last but not least it gives you if_enc(4) for IPv6 as well.
[ As some auxiliary state was not available in the later
input path we save it in the tdbi. That way tcpdump can give a
consistent view of either of (authentic,confidential) for both
before and after states. ]
Discussed with: thompsa (2007-04-25, basic idea of unifying paths)
Reviewed by: thompsa, gnn
- On amd64, just assume type #1 is always used. PCI 2.0 mandated
deprecated type #2 and required type #1 for all future bridges which
was well before amd64 existed.
- For i386, ignore whatever value was in 0xcf8 before testing for type #1
and instead rely on the other tests to determine if type #1 works. Some
newer machines leave garbage in 0xcf8 during boot and as a result the
kernel doesn't find PCI at all (which greatly confuses ACPI which expects
PCI to exist when PCI busses are in the namespace).
MFC after: 3 days
Discussed with: scottl
ZFS porting style didn't extend this, instead using a heap of additional
header files that don't get installed.
My intention had been to allow OpenSolaris external code to build on
FreeBSD out of the box (i.e. without a src tree).
Make clear that this is not a good idea when called from
tcp_output()->ipsec_hdrsiz_tcp()->ipsec4_hdrsize_tcp()
as we do not know if IPsec processing is needed at that point.
T_DIRECT filtering so that disk drives can be attached via the
pass driver. Add CAM locking. Don't mark CAM commands as SG64
since the hardware isn't designed to deal with 64-bit passthru
commands. Hopefully the bounce buffer changes that were done
for the management/ioctl interface are robust enough to handle
this deficiency for CAM as well.
- Enable pcbeep control for Acer + ALC268 (nid 29). Give enough (fake)
hints so the parser will grab it and allocate "speaker" control.
- Fix regression while preparing DAC and ADC for multichannel
format. Since playback policy is to output to every possible path,
ensure that each DAC is started.
Reported / Tested by: Guy Brand
Currently, Giant is not too much contented so that it is ok to treact it
like any other mutexes.
Please don't forget to update your own custom config kernel files.
Approved by: cognet, marcel (maintainers of arches where option is
not enabled at the moment)
of some old programs. Since sigval is union type, this change will not have
binary compatibility problem.
MFC: after 3 days
Discussed with: rwatson, glebius
It should just contain the value we want to add, as if we're interrupted
between the add and the str, we will restart from the beginning. Just use
a register we can scratch instead.
MFC After: 1 week
routine. It is not needed as the existing tests for segment coalescing
already handle bounced addresses and it prevents legal segment coalescing
in certain edge cases.
MFC after: 1 week
Reviewed by: scottl
The call should happen with the driver lock held. We don't hold the driver
lock in newstate as it's a separate thread where we can't sleep (and we only
call wpi_cmd in async mode).
Discovered By: Attillo's callout rework
Approved By: mlaier (comentor)
currently, before to spin the turnstile spinlock is acquired and the
waiters flag is set.
This is not strictly necessary, so just spin before to acquire the
spinlock and to set the flags.
This will simplify a lot other functions too, as now we have the waiters
flag set only if there are actually waiters.
This should make wakeup/sleeping couplet faster under intensive mutex
workload.
This also fixes a bug in rw_try_upgrade() in the adaptive case, where
turnstile_lookup() will recurse on the ts_lock lock that will never be
really released [1].
[1] Reported by: jeff with Nokia help
Tested by: pho, kris (earlier, bugged version of rwlock part)
Discussed with: jhb [2], jeff
MFC after: 1 week
[2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
sends frames up the stack after changing the current channel then
the lookup by ieee channel number may fail leaving a null ptr in
se_chan; if this happens fallback to the channel recorded when the
frame is processed (curchan). Since the frame doesn't contribute
to scan results for the sta this is acceptable.
Reviewed by: thompsa
MFC after: 3 days
