of this part of commits is to minimize unnecessary differences between
the other NFS's of similar origin. Yes, there are gratuitous changes here
that the style folks won't like, but it makes the catch-up less difficult.
a test of the irq number, and made failure of this test non-fatal.
Removed related unused complications for the APIC_IO case. Removed the
no-test3 flag.
Deverbosified the failure messages for the other tests. Removed the
per-port verbose flag - just use the general verbose flag.
that I checked (eg: ufs_link()) do the ABORTOP on the directory rather than
the file itself. After Michael Hancock's patches, the abortop doesn't seem
all that critial now since something else will free the pathname buffer.
rather than assuming 2^64. It may not like files that big. :-)
On the nfs server, calculate and report the max file size as the point
that the block numbers in the cache would turn negative.
(ie: 1099511627775 bytes (1TB)).
One of the things I'm worried about however, is that directory offsets
are really cookies on a NFSv3 server and can be rather large, especially
when/if the server generates the opaque directory cookies by using a local
filesystem offset in what comes out as the upper 32 bits of the 64 bit
cookie. (a server is free to do this, it could save byte swapping
depending on the native 64 bit byte order)
Obtained from: NetBSD
I had a reason for doing this, but it violates the principle of least
astonishment. (At some point I may put this back but attach it to one of
the LINK flags so the behavior can be toggled on and off.)
Also replace my tl_calchash() with a much less disgusting and substantially
smaller one supplied by Bill Fenner.
Clean up (or if antipodic: down) some of the msgbuf stuff.
Use an inline function rather than a macro for timecounter delta.
Maintain process "on-cpu" time as 64 bits of microseconds to avoid
needless second rollover overhead.
Avoid calling microuptime the second time in mi_switch() if we do
not pass through _idle in cpu_switch()
This should reduce our context-switch overhead a bit, in particular
on pre-P5 and SMP systems.
WARNING: Programs which muck about with struct proc in userland
will have to be fixed.
Reviewed, but found imperfect by: bde
These are probably generated by other PCI devices sharing the TLAN's
interrupt. The programmer's guide says to simply re-enable interrupts
and return if one of these is detected.
Prompted by bug report from: Bill Fenner
net.inet.ip.icmp.bmcastecho = 0 by removing the extra check for the
address being a multicast address. The test now relies on the link
layer flags that indicate it was received via multicast. The previous
logic was broken and replied to ICMP echo/timestamp broadcasts even
when the sysctl option disallowed them.
Reviewed by: wollman
i contains the contents of the EP_W0_CONFIG_CTRL register.
i was being used as the array index into an array on the stack.
j is initialized to 0 as it should be.
PR: kern/6757
Reviewed by: jmb
Submitted by: Stephane E. Potvin <sepotvin@videotron.ca>
Prior to this change, Accidental recursion protection was done by
the diverted daemon feeding back the divert port number it got
the packet on, as the port number on a sendto(). IPFW knew not to
redivert a packet to this port (again). Processing of the ruleset
started at the beginning again, skipping that divert port.
The new semantic (which is how we should have done it the first time)
is that the port number in the sendto() is the rule number AFTER which
processing should restart, and on a recvfrom(), the port number is the
rule number which caused the diversion. This is much more flexible,
and also more intuitive. If the user uses the same sockaddr received
when resending, processing resumes at the rule number following that
that caused the diversion. The user can however select to resume rule
processing at any rule. (0 is restart at the beginning)
To enable the new code use
option IPFW_DIVERT_RESTART
This should become the default as soon as people have looked at it a bit
passed to the user process for incoming packets. When the sockaddr_in
is passed back to the divert socket later, use thi sas the primary
interface lookup and only revert to the IP address when the name fails.
This solves a long standing bug with divert sockets:
When two interfaces had the same address (P2P for example) the interface
"assigned" to the reinjected packet was sometimes incorect.
Probably we should define a "sockaddr_div" to officially hold this
extended information in teh same manner as sockaddr_dl.
of the TCP payload. See RFC1122 section 4.2.2.6 . This allows
Path MTU discovery to be used along with IP options.
PR: problem discovered by Kevin Lahey <kml@nas.nasa.gov>
so it must be adjusted (minus 1) before using it to do the length check.
I'm not sure who to give the credit to, but the bug was reported by
Jennifer Dawn Myers <jdm@enteract.com>, who also supplied a patch. It
was also fixed in OpenBSD previously by andreas.gunnarsson@emw.ericsson.se,
and of course I did the homework to verify that the fix was correct per
the specification.
PR: 6738
for better packing. This means that we can choose better values for the
various hash entries without having to try and get it all to fit within
an artificial power of two limit for malloc's sake.
in -current is over, I'll put a 2.2.x specific version in the RELENG_2_2
branch. If somebody wants a 2.2 version of this driver now, they can check
out the previous version from CVS or ask me via e-mail.
Gee people, I didn't mean to stir up such a controversy. I just wanted
to make sure I could get this thing to work with both kernel versions
and didn't want to have to maintain two separate copies. All ya hadda
do was ask. :)
drivers here do and it also blows up in building GENERIC during
a release build if you try and include <osreldate.h> (which shot
my SNAP dead - argh!). Use __FreeBSD__ instead.
unexpectedly do not complete writes even with sync I/O requests.
This should help the behavior of mmaped files when using
softupdates (and perhaps in other circumstances also.)
This driver supports the following cards/integrated ethernet controllers:
Compaq Netelligent 10, Compaq Netelligent 10/100, Compaq Netelligent 10/100,
Compaq Netelligent 10/100 Proliant, Compaq Netelligent 10/100 Dual Port,
Compaq NetFlex-3/P Integrated, Compaq NetFlex-3/P Integrated,
Compaq NetFlex 3/P w/ BNC, Compaq Deskpro 4000 5233MMX.
It should also support Texas Instruments NICs that use the ThunderLAN
chip, though I don't have any to test. If you've got a card that uses
the ThunderLAN chip but isn't listed in the PCI vendor/product list in
if_tl.c, try adding it and see what happens.
The driver supports any MII compliant PHY at 10 or 100Mbps speeds in
full or half duplex. (Those I've personally tested are the National
Semiconductor DP83840A (Prosignia server), the Level 1 LXT970 (Deskpro
desktop), and the ThunderLAN's internal 10baseT PHY.) Autonegotiation,
hardware multicast filtering, BPF and ifmedia support are included.
This chip is pretty fast; Prosignia servers with NCR SCSI, ThunderLAN
ethernet and FreeBSD make for a nice combination.
cases we ignore it (eg: read/write) to maintain chmod-after-open semantics
but in other cases we do care, eg: creating files, access() etc. Never
ignore errors from VOP_ACCESS() on immutable files.
This apparently comes from BSDI (from Keith Bostic) via NetBSD.
PR: 5148
Submitted by: Yoshiro MIHIRA <sanpei@yy.cs.keio.ac.jp>
end up being the same, but it doesn't look like you're comparing
apples and oranges.
2. Use need_resched instead of reset_priority. This isn't right
either, since for example you'll round-robin against equal priority FIFO
processes when lowering the priority of another process,
but this works better and a real fix needs to be in kern_synch and
not out here.
3. This is not a device driver: copyin/copyout the structure.
Althought the comments say the datasheet doesn't list the device ID
registers on the M2/MX, they seem to be there and quite alive.
(It's interesting to note that the M2/MX calls itself a 686 class cpu but
is missing a heck of a lot of features, including VME, PGE, PSE, etc)
