in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
addresses. This allows the table to be consistent when IPv6
addresses have to be printed.
While there, document the -v option in the man page.
Sponsored by: Netflix, Inc.
- Capture exit code in pipeline and test in output.
- Drop awk use in favor of `sleep 2`. This helps guarantee the EPIPE
behavior without the potential race.
Now that CloudABI's sockets API has been changed to be addressless and
only connected socket instances are used (e.g., socket pairs), they have
become fairly similar to pipes. The only differences on CloudABI is that
socket pairs additionally support shutdown(), send() and recv().
To simplify the ABI, we've therefore decided to remove pipes as a
separate file descriptor type and just let pipe() return a socket pair
of type SOCK_STREAM. S_ISFIFO() and S_ISSOCK() are now defined
identically.
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
In the case where write(2) does not return -1, it does not initialize errno.
This can happen when a broken pipe causes a short write.
I attempted to adapt the submitted test case to ATF but could not figure out
how to make the test run in the ATF environment. So the aborted test is
left disabled, in case someone would like to run it manually or fix it.
PR: 221976
Submitted by: <martin AT lispworks.com> (earlier version)
Sponsored by: Dell EMC Isilon
Specifically, decode the siginfo structure returned by sigtimedwait(),
sigwaitinfo(), and wait6(). While here, also decode the signal number
returned in the second argument to sigwait().
kresolve_list() is calling many kldsym(2). Removing that call on when collecting
stats for the running kernel improves the startup time and CPU usage.
Submitted by: Nikita Kozlov (nikita.kozlov@blade-group.com)
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: blade
Differential Revision: https://reviews.freebsd.org/D12151
Now that all of the packaged software has been adjusted to either use
Flower (https://github.com/NuxiNL/flower) for making incoming/outgoing
network connections or can have connections injected, there is no longer
need to keep accept() around. It is now a lot easier to write networked
services that are address family independent, dual-stack, testable, etc.
Remove all of the bits related to accept(), but also to
getsockopt(SO_ACCEPTCONN).
Decode fields from the siginfo_t stored in the PT_LWPINFO structure when a
signal is caught by a traced process. This includes the signal code
(si_code) as well as additional members such as si_addr, si_pid, etc.
With Flower (CloudABI's network connection daemon) becoming more
complete, there is no longer any need for creating any unconnected
sockets. Socket pairs in combination with file descriptor passing is all
that is necessary, as that is what is used by Flower to pass network
connections from the public internet to listening processes.
Remove all of the kernel bits that were used to implement socket(),
listen(), bindat() and connectat(). In principle, accept() and
SO_ACCEPTCONN may also be removed, but there are still some consumers
left.
Obtained from: https://github.com/NuxiNL/cloudabi
MFC after: 1 month
fgrep/grep -F will error out at runtime if compiled with a regex(3)
that does not define REG_NOSPEC or REG_LITERAL. glibc is one such regex(3)
implementation, and as it turns out they don't support literal matching at
all.
Provide a primitive literal matcher for use with glibc and other
implementations that don't support literal matching so that we don't
completely lose fgrep/grep -F if compiled against libgnuregex on stable/10,
stable/11, or other systems that we don't necessarily support.
This is a wholly unoptimized implementation with no plans to optimize it as
of now. This is due to both its use-case being primarily on unsupported
systems in the near-distant future and that it's reinventing the wheel that
we already have available as a feature of regex(3).
Reviewed by: cem, emaste, ngie
Approved by: emaste (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12056
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
o Density code 0x5 is also known as QIC-11, and should have a footnote
reference.
o Add notes on QIC tape drives from the bug report. These may help anyone
trying to use a QIC drive.
o Take out a "more more" instance found by igor.
o Bump the man page date.
The PR is 14 years old, so it's past time to retire it.
PR: doc/53596
Submitted by: tedm@toybox.placo.com
Reviewed by: bcr
Sponsored by: Spectra Logic
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
When displaying in non-human form, if the free-memory number
is large (more than 7 digits), there is no space between it and
the page fault column.
PR: 221290
Submitted by: Josuah Demangeon <mail@josuah.net> (Original version)
Instead of using a non-configurable ".BAK" suffix, respect the
SIMPLE_BACKUP_SUFFIX environment variable also used by patch(1). This
simplifies cleanup operations in some patch/indent workflows.
Reviewed by: cem (earlier version), emaste, pstef
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D10921
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
- Use the title role for column headers.
- Fix a typo in a field name (lpwid -> lwpid).
- Place the fields of different threads in separate containers.
0.8.4:
- void anchor width optimization when we have a custom formatter (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221130)
- make "{[:/18}" do the right thing (also allows "{[:/%s}", wide ? 40 : 10)
- Can't skip anchor formatting in non-display styles
- add test case for {[:/18}
- add upload-xohtml-files to 'make upload'
0.8.3:
- xohtml: Add "-w" option to pull support files from gh_pages
- Add "upload-xohtml-files" target to publish support files in gh_pages/
- add HISTORY/AUTHORS section to man pages
0.8.2:
- xohtml: Add div.units as standard CSS text
- Don't treat values as format strings; they are not
- add "-p" to "mkdir -p build" in setup.sh
- add test case for {U:%%} (from df.c)
- detect end-of-string in '%' and '' escaping
- make xo_simple_field, for common simple cases
- xohtml: nuke "n" in "echo" commands
- rename "format" to "fmt" for consistency; same for "str" to "value"
Submitted by: phil
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
flowtable anymore (as flowtable was never considered to be useful in
the forwarding path).
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D11448
The CloudABI specification has had some minor changes over the last half
year. No substantial features have been added, but some features that
are deemed unnecessary in retrospect have been removed:
- mlock()/munlock():
These calls tend to be used for two different purposes: real-time
support and handling of sensitive (cryptographic) material that
shouldn't end up in swap. The former use case is out of scope for
CloudABI. The latter may also be handled by encrypting swap.
Removing this has the advantage that we no longer need to worry about
having resource limits put in place.
- SOCK_SEQPACKET:
Support for SOCK_SEQPACKET is rather inconsistent across various
operating systems. Some operating systems supported by CloudABI (e.g.,
macOS) don't support it at all. Considering that they are rarely used,
remove support for the time being.
- getsockname(), getpeername(), etc.:
A shortcoming of the sockets API is that it doesn't allow you to
create socket(pair)s, having fake socket addresses associated with
them. This makes it harder to test applications or transparently
forward (proxy) connections to them.
With CloudABI, we're slowly moving networking connectivity into a
separate daemon called Flower. In addition to passing around socket
file descriptors, this daemon provides address information in the form
of arbitrary string labels. There is thus no longer any need for
requesting socket address information from the kernel itself.
This change also updates consumers of the generated code accordingly.
Even though system calls end up getting renumbered, this won't cause any
problems in practice. CloudABI programs always call into the kernel
through a kernel-supplied vDSO that has the numbers updated as well.
Obtained from: https://github.com/NuxiNL/cloudabi
Given an empty pattern (i.e. grep "" A B), bsdgrep(1) would previously exit()
with the appropriate exit code upon encountering an empty file. Likely intended
as an optimization, but this behavior is technically incorrect since an empty
pattern should match every line.
PR: 220924
Reviewed by: emaste, cem (earlier version), ngie
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11698
libarchive may limit a single archive_write_data call to handling
0x7fffffff bytes. Add a loop to handle partial writes.
Reviewed by: kib, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11715
are _two_ options that control its behaviour wrt child processes; slightly
improve the example[1], and add Xrefs.
Discussed with: wblock [1]
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
5.0.0 (trunk r308421). Upstream has branched for the 5.0.0 release,
which should be in about a month. Please report bugs and regressions,
so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 2 months
- Visualize mutually exclusive options and their corresponding
arguments.
- Try to make the subtleties that are expressed in the code, and
potentially in the manpages, more apparent.
contrib/netbsd-tests/usr.bin/diff/t_diff.sh with the name of the script via
`basename $0`.
This was a change I forgot to port over from
^/head/gnu/usr.bin/diff/tests/Makefile@r272787.
__ILP32__/__LP64__ instead of by architecture.
The list was incomplete (previous commits purged invalid architectures,
like __alpha__, but failed to add new ones). It's best to base the symbol
presence on whether or not the architecture is ILP32 / LP64 capable, per
the compiler.
This fixes the ILP32/LP64 program environments on some architectures like
arm64, and by proxy fixes the tests on those architectures.
MFC after: 1 month
Reviewed by: no one (timed out on feedback from imp)
Differential Revision: D10787
i.e., when print_only is called.
Prior to this change, -rq was always returning 0. After this change it will
return 1 if there is a difference between two directories.
This fixes compatibility with GNU diff and unbreaks backwards compatibility
expectations.
Found when trying to extend diff_test:brief_format_test.
MFC after: 2 months
MFC with: r321076, r321077
-q is specified.
This improves compatibility with GNU diff.
Found by accident with `diff -Nrq /usr/tests /usr/tests.new | grep Kyuafile`.
MFC after: 2 months
Relnotes: yes
These are taken directly from the density report from a TS1155
tape drive. (Using mt getdensity)
lib/libmt/mtlib.c:
Add 3592B5 encrypted/unencrypted density codes, and bpmm/bpi
values. The bpmm/bpi values are the same as TS1150, but
there are 50% more tracks.
usr.bin/mt/mt.1:
Add 3592B5 encrypted/unencrypted density codes, bpmm/bpi
values and number of tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
tests are omitted for this initial run as there are still some bugs to work
out there.
This covers -s flag testing on devices and non-devices that would have
caught breakage found in PR 219173 as well as other subtle breakage caused
locally.
Reviewed by: cem, ngie
Approved by: cem (acting co-mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11279
This option has been missing from the usage message ever since the program
was first imported.
Submitted by: shivansh
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11529
Save output from ls -ldT and stat -l, then normalize all repeating whitespace using
sed to single column spaces.
This makes the test flexible with single-digit days, etc, similar to r320723. This
approach is just a bit more of a hammer approach because of how the columns are
ordered/spaced in both ls and stat.
MFC after: 1 week
MFC with: r319841
After the addition of SUBDIR.yes, uniquifying/ordering the SUBDIRs doesn't
make a whole lot of sense, and it's in effect a half measure.
Ordering SUBDIR (after adding SUBDIR.yes to it) in bsd.subdir.mk is a
separate change that warrants more discussion/testing, because while
the SUBDIR_PARALLEL work largely fixed dependency ordering for SUBDIRs,
there might be downstream FreeBSD consumers that rely on the SUBDIR
ordering.
MFC after: 2 months
Reviewed by: bdrewery
Differential Revision: D11398
Process core notes for a 32-bit process running on a 64-bit host need to
use 32-bit structures so that the note layout matches the layout of notes
of a core dump of a 32-bit process under a 32-bit kernel.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D11407
- Add "compatible with gpl dtc X.Y.Z" to version output so U-Boot doesn't complain
- Fix cross reference node
This fixes some Allwinner DTS (and probably others).
Per POSIX, join(1) (in modes other than -o) is a concatenation of selected
character fields. The joined field is first, followed by fields in the
order they occurred in the input files.
Our join(1) utility previously handled this correctly for lines with a match
in the other file. But it failed to order output fields correctly for
unmatched lines, printed in -a and -v modes.
A simple test case is:
$ touch a
$ echo "2 1" > b
$ join -v2 -2 2 a b
1 2
PR: 217711
Reported by: alt.j2-4o4s2yon at yopmail.com
Sponsored by: Dell EMC Isilon
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
file. That logic has grown quite significantly now;
o add a special handling for the snapshot images. Those have some
extra headers at the end of the image and we don't need those
in the output image really.
MFC after: 6 weeks
This change implements NOTE_ABSTIME flag for EVFILT_TIMER, which
specifies that the data field contains absolute time to fire the
event.
To make this useful, data member of the struct kevent must be extended
to 64bit. Using the opportunity, I also added ext members. This
changes struct kevent almost to Apple struct kevent64, except I did
not changed type of ident and udata, the later would cause serious API
incompatibilities.
The type of ident was kept uintptr_t since EVFILT_AIO returns a
pointer in this field, and e.g. CHERI is sensitive to the type
(discussed with brooks, jhb).
Unlike Apple kevent64, symbol versioning allows us to claim ABI
compatibility and still name the new syscall kevent(2). Compat shims
are provided for both host native and compat32.
Requested by: bapt
Reviewed by: bapt, brooks, ngie (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D11025
This includes decoding both scheduler policy constants and the sched_param
structure for sched_get_priority_max(), sched_get_priority_min(),
sched_getparam(), sched_getscheduler(), sched_rr_get_interval(),
sched_setparam(), and sched_setscheduler().
- xohtml: Add "-w" option to pull support files from gh_pages
- Add "upload-xohtml-files" target to publish support files in gh_pages/
- add HISTORY/AUTHORS section to man pages
- xohtml: Add div.units as standard CSS text
- Don't treat values as format strings; they are not
- add "-p" to "mkdir -p build" in setup.sh
- add test case for {U:%%} (from df.c)
- detect end-of-string in '%' and '' escaping
- make xo_simple_field, for common simple cases
- xohtml: nuke "n" in "echo" commands
- rename "format" to "fmt" for consistency; same for "str" to "value"
- update test cases
Submitted by: phil
Based on feedback from OpenZFS developers Matt Ahrens and George Wilson,
the calculation of the ratio no longer takes in to account overhead.
The old formula could result in reporting a negative compression ratio
This could confuse the user or give a false impression that there would be
an advantage to disabling the compressed ARC feature.
The new formula will more closely match an average of the on-disk
compression ratio, as reported by the ZFS property 'compressratio'
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Tests that exercise the following flags are added in this commit:
- -A
- -H
- -I
- -g
- -h
- -k
- -m
Additional tests will be added soon.
MFC after: 1 month
These are were created proactively, in anticipation of the support being
fully implemented sometime in the future.
The tests currently fail on ^/head@r319845, however. Expect them to fail.
PR: 219933
Tested with: gdiff
Testcases for -H, -L, and -f haven't been implemented yet, in part due
to additional complexity needed to validate the features:
* -H and -f will require an external "helper" program to display/modify
the state/permissions for a given path.
* -L is being covered partially via the -n testcase today.
MFC after: 1 month
o Separate fields of struct socket that belong to listening from
fields that belong to normal dataflow, and unionize them. This
shrinks the structure a bit.
- Take out selinfo's from the socket buffers into the socket. The
first reason is to support braindamaged scenario when a socket is
added to kevent(2) and then listen(2) is cast on it. The second
reason is that there is future plan to make socket buffers pluggable,
so that for a dataflow socket a socket buffer can be changed, and
in this case we also want to keep same selinfos through the lifetime
of a socket.
- Remove struct struct so_accf. Since now listening stuff no longer
affects struct socket size, just move its fields into listening part
of the union.
- Provide sol_upcall field and enforce that so_upcall_set() may be called
only on a dataflow socket, which has buffers, and for listening sockets
provide solisten_upcall_set().
o Remove ACCEPT_LOCK() global.
- Add a mutex to socket, to be used instead of socket buffer lock to lock
fields of struct socket that don't belong to a socket buffer.
- Allow to acquire two socket locks, but the first one must belong to a
listening socket.
- Make soref()/sorele() to use atomic(9). This allows in some situations
to do soref() without owning socket lock. There is place for improvement
here, it is possible to make sorele() also to lock optionally.
- Most protocols aren't touched by this change, except UNIX local sockets.
See below for more information.
o Reduce copy-and-paste in kernel modules that accept connections from
listening sockets: provide function solisten_dequeue(), and use it in
the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
infiniband, rpc.
o UNIX local sockets.
- Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
local sockets. Most races exist around spawning a new socket, when we
are connecting to a local listening socket. To cover them, we need to
hold locks on both PCBs when spawning a third one. This means holding
them across sonewconn(). This creates a LOR between pcb locks and
unp_list_lock.
- To fix the new LOR, abandon the global unp_list_lock in favor of global
unp_link_lock. Indeed, separating these two locks didn't provide us any
extra parralelism in the UNIX sockets.
- Now call into uipc_attach() may happen with unp_link_lock hold if, we
are accepting, or without unp_link_lock in case if we are just creating
a socket.
- Another problem in UNIX sockets is that uipc_close() basicly did nothing
for a listening socket. The vnode remained opened for connections. This
is fixed by removing vnode in uipc_close(). Maybe the right way would be
to do it for all sockets (not only listening), simply move the vnode
teardown from uipc_detach() to uipc_close()?
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9770
It implements missing man(7) macros used in base by kerberos/ntp and makes them
supported by mandoc.
This import should have been done before the removal of groff.
Reported by: gordon
The cmd argument passed to extattrctl() is not decoded as a string constant
but is just printed in hex. The value is filesystem-specific but in
practice is only used with UFS1 filesystems.
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
- dup and dup2 print fd arguments in decimal.
- pread and pwrite are similar to read and write with the addition of the
file offset.
- getdirentries displays the output entries as a string for now and also
prints the value returned in *basep. Eventually the buffer for
getdirentries should perhaps be decoded as an array of dirent
structures.
PR: 214885
Submitted by: Jonathan de Boyne Pollard <J.deBoynePollard-newsgroups@NTLWorld.COM>
J. Sorenson and J. Webster, Strong pseudoprimes to twelve prime
bases, Math. Comp. 86(304):985-1003, 2017.
teach primes(6) to enumerate primes up to 2^64 - 1. Until Sorenson
and Webster's paper, we did not know how many strong speudoprime tests
were required when testing alleged primes between 3825123056546413051
and 2^64 - 1.
Reported by: Luiz Henrique de Figueiredo
Relnotes: primes(6) now enumerates primes beyond 3825123056546413050,
up to a new limit of 2^64 - 1.
MFC After: 1 week
Add a new sysdecode_getrusage_who() which decodes the RUSAGE_* constant
passed as the first argument to getrusage(). Use this function in both
kdump and truss to decode the first argument to getrusage().
PR: 215448
Submitted by: Anton Yuzhaninov <citrin+pr@citrin.ru>
MFC after: 1 month
This is undocumented to match GNU diff where -H is also undocumented.
Some existing software (such as kompare) uses this option by default.
Reviewed by: emaste, rpokala
Differential Revision: https://reviews.freebsd.org/D11022
^/head@r319125 changed the location of the backup pmbr, requiring the
output files to be regenerated, since they're binary disk dumps.
The output files were regenerated with "make rebase"--fixed in
^/head@r319294.
MFC with: r319125, r319294
PR: 219673
Sponsored by: Dell EMC Isilon
"make rebase" can be used for rebasing the output files from mkimg
after making a change to mkimg. This will come in handy soon, per
bug 219673.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
This helps ensure that the output files are regenerated if the input files
change, after the output files have been created.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
platform (returned by -m) can be different from the machine's processor
architecture (-p)
- Document that make(1) sets universal MACHINE and MACHINE_ARCH variables
based on these values
Reviewed by: imp, manpages (bjk)
Approved by: bjk, imp (implied)
Differential Revision: https://reviews.freebsd.org/D10489
The following changes have been made over the last couple of months:
Features:
- With bsdgrep -r, the working directory is implied if no directory is
specified
- bsdgrep will now behave as bsdgrep -r does when it's named rgrep
- bsdgrep now understands -z/--null-data to use \0 as EOL
- GNU regex compatibility is now indicated with a "GNU compatible" in
the version string
Fixes:
- --mmap no longer hangs when coming across an EOF without an
accompanying EOL
- -o/--color matching generally improved, now produces earliest /
longest matches
- Context output now more closely aligns with GNU grep
- Zero-length matches no longer exhibit broken behavior
- Every output line now honors -b/-H/-n flags
Tests have been added for previous regressions as well as other
previously untested behaviors.
Various other fixes have been commited, and refactoring for further /
later improvements has taken place.
(The original submission changed the version string to 2.5.2, but I
decided to use 2.6.0 to reflect the addition of new features.)
Submitted by: Kyle Evans <kevans91@ksu.edu>
Differential Revision: https://reviews.freebsd.org/D10982
The PMBR last sector should be number of sector - 1 (As stated in UEFI Spec
2.6 page 118 table 17).
This fixes warning printed by linux tools like parted or fdisk.
Sponsored by: Gandi.net
of calling grep -r without it, and saving the output to a file
This ensures that any errors thrown via grep -r are caught, not lost, and uses
existing atf-sh idioms for saving files.
Tested with: bsdgrep, gnu grep (base, ports)
Sponsored by: Dell EMC Isilon
- Add the missing option 'n' to the getopt(3) string
- Add the missing options 'libxo' and 'N' to the usage message
- Add the missing options 'M' and 'N' to the man-page
Submitted by: Keegan Drake H.P. <kdrakehp@zoho.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10915
Correct a couple of minor BSD grep assumptions that are valid for line
processing but not future chunk-based processing.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: bapt, cem
Differential Revision: https://reviews.freebsd.org/D10824
