illumos/illumos-gate@9185393f299185393f29https://www.illumos.org/issues/6412
It seems that zfs receive -F -u would mount a received filesystem after
receiving a full stream if a destination filesystem already existed (and, thus,
got destroyed and re-created) and was mounted.
How to reproduce:
$ zfs create rpool/sandbox
$ zfs create rpool/sandbox/from
$ zfs create rpool/sandbox/to
$ zfs snap rpool/sandbox/from@snap
$ zfs send rpool/sandbox/from@snap | zfs recv -v -F -u rpool/sandbox/to
receiving full stream of rpool/sandbox/from@snap into rpool/sandbox/to@snap
received 41.7KB stream in 1 seconds (41.7KB/sec)
$ zfs get mounted rpool/sandbox/to
NAME PROPERTY VALUE SOURCE
rpool/tmp/sandbox/to mounted yes -
This behavior can be problematic if the mountpoint property changes either
because it had a non-inherited value or the stream contains properties because
it has been generated with either -R or -p.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
illumos/illumos-gate@bf4d553b8abf4d553b8ahttps://www.illumos.org/issues/5778
DATA_TYPE_INT8_ARRAY is missing from the array check in nvpair_type_is_array()
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@icyb.net.ua>
illumos/illumos-gate@ee3c499ad1ee3c499ad1https://www.illumos.org/issues/5752
dump_nvlist() is not aware of the boolean array value type:
bad config type 24 for "foobar"
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
illumos/illumos-gate@620f322510620f322510https://www.illumos.org/issues/6051
Currently lzc_receive() requires that its snapname argument is a snapshot name
(contains '').
@zfs receive allows to specify just a dataset name and would try to deduce the
snapshot name from the stream.
I propose to allow lzc_receive() to do the same.
That seems to be quite easy to implement, it requires only a small amount of
logic, it does not require any additional system calls or any additional data
from the stream.
The benefit is that the new behavior would allow to keep the snapshot names the
same between the sender and receiver at zero cost, without a need to pass the
names out of band.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@icyb.net.ua>
illumos/illumos-gate@260af64db7260af64db7https://www.illumos.org/issues/3746
From the original change log:
It was possible for a reference to be added even with the lock held, and
for references added just after a lock release to be lost.
This bug was also independently found and reported in wesunsolve.net
issues 6985013 6995524.
In zrl_add(), always use an atomic operation to update the refcount.
The mutex in the ZRL only guarantees that wakeups occur for waiters on the
lock. It offers no protection against concurrent updates of the refcount.
The only refcount transition that is safe to perform without an atomic
operation is from ZRL_LOCKED back to 0, since this can only be performed
by the thread which has the ZRL locked.
Authored by: Will Andrews <will@freebsd.org>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Pavel Zakharov <pavel.zakha@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Youzhong Yang <yyang@mathworks.com>
Using a benchmark which creates 2 million files in one TXG, I observe
that the thread running spa_sync() is on CPU almost the entire time we
are syncing, and therefore can be a performance bottleneck. About 50% of
the time in spa_sync() is in dmu_objset_do_userquota_updates().
The problem is that dmu_objset_do_userquota_updates() calls
zap_increment_int(DMU_USERUSED_OBJECT) once for every file that was
modified (or created). In this benchmark, all the files are owned by the
same user/group, so all 2 million calls to zap_increment_int() are
modifying the same entry in the zap. The same issue exists for the
DMU_GROUPUSED_OBJECT.
We should keep an in-memory map from user to space delta while we are
syncing, and when we finish, iterate over the in-memory map and modify
the ZAP once per entry. This reduces the number of calls to
zap_increment_int() from "number of objects modified" to "number of
owners/groups of modified files".
This reduced the time spent in spa_sync() in the file create benchmark
by ~33%, from 11 seconds to 7 seconds.
Closes#107
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Jinshan Xiong <jinshan.xiong@intel.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@5fc46359c5
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Toomas Soome <tsoome@me.com>
openzfs/openzfs@c8811bd3e2
Until we can resolve the numerous hole_birth bugs that have cropped up
recently, and come up with a way going forwards to protect users from
corruption, we should disable the hole_birth feature. Using a tunable
allows those who are confident that their data is correct to continue to
take advantage of the feature.
Closes#188
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
dsl_dataset_space is looking at the ds_bp's fill count while
dmu_objset_write_ready() is concurrently modifying it. This fix adds an
rrwlock to protect the ds_bp.
Closes#180
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Closes#109
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@d3e523d489
This resolves two 'zfs recv' issues. First, when receiving into an
existing filesystem, a snapshot created during the receive process is
not added to the guid->dataset map for the stream, resulting in failed
lookups for deduped streams when a WRITE_BYREF record refers to a
snapshot received earlier in the stream. Second, the newly created
snapshot was also not set properly, referencing the snapshot before the
new receiving dataset rather than the existing filesystem.
Closes#159
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Author: Chris Williamson <chris.williamson@delphix.com>
openzfs/openzfs@b09697c8c1
zap_lockdir() / zap_unlockdir() should take a "void *tag" argument which
tags the hold on the zap. This will help diagnose programming errors
which misuse the hold on the ZAP.
Sponsored by: Intel Corp.
Closes#108
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@0780b3eab5
7298 printa() of multiple aggregations can fail for llquantize()
illumos/illumos-gate@0ddc0ebb74
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Adam Leventhal <adam.leventhal@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Bryan Cantrill <bryan@joyent.com>
illumos/illumos-gate@29bdd2f91629bdd2f916https://www.illumos.org/issues/7277
ztest always prints the debug messages (zfs_dbgmsg()) by calling
zfs_dbgmsg_print(). We should add a flag to zdb to make it do this as well
before exiting.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
7115 6922 generates ESC_ZFS_VDEV_REMOVE_AUX a bit too often
illumos/illumos-gate@b72b6bb10ab72b6bb10ahttps://www.illumos.org/issues/7136
6922 added ESC_ZFS_VDEV_REMOVE_AUX and ESC_ZFS_VDEV_REMOVE_DEV sysevents
whenever an aux device gets removed from a pool. However, those sysevents will
be created without the vdev_guid and vdev_path fields. It would be better to
always populate those fields.
https://www.illumos.org/issues/7115
The addition of spa_event_notify in vdev removal code (see #6922) causes events
to be generated even if the spare failed to be removed with EBUSY.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@12b90ee2d312b90ee2d3https://www.illumos.org/issues/7230
A test failure occurred where a send stream had only a BEGIN record. This
should not be possible if the send returns without error. Prevented this from
happening in the future by adding an assertion to dmu_send_impl() to verify
that if the function returns 0 (success) both a BEGIN and END record are
present. Did this by adding flags to dmu_sendarg_t (indicating whether BEGIN or
END records sent), having dump_record() set flags appropriately, adding VERIFY
statement to dmu_send_impl().
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matt Krantz <matt.krantz@delphix.com>
illumos/illumos-gate@bd56f80007bd56f80007https://www.illumos.org/issues/7235
The function dsl_dataset_set_blkptr() is unused. We should remove it.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@0f7643c7370f7643c737https://www.illumos.org/issues/7090
When write I/Os are issued, they are issued in block order but the ZIO pipeline
will drive them asynchronously through the allocation stage which can result in
blocks being allocated out-of-order. It would be nice to preserve as much of
the logical order as possible.
In addition, the allocations are equally scattered across all top-level VDEVs
but not all top-level VDEVs are created equally. The pipeline should be able to
detect devices that are more capable of handling allocations and should
allocate more blocks to those devices. This allows for dynamic allocation
distribution when devices are imbalanced as fuller devices will tend to be
slower than empty devices.
The change includes a new pool-wide allocation queue which would throttle and
order allocations in the ZIO pipeline. The queue would be ordered by issued
time and offset and would provide an initial amount of allocation of work to
each top-level vdev. The allocation logic utilizes a reservation system to
reserve allocations that will be performed by the allocator. Once an allocation
is successfully completed it's scheduled on a given top-level vdev. Each top-
level vdev maintains a maximum number of allocations that it can handle
(mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels *
mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab
groups and round robin across all eligible metaslab groups to distribute the
work. As top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@b702644a6eb702644a6ehttps://www.illumos.org/issues/7164
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", we should interpret it as the topmost
dataset (rather than the whole pool)
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
illumos/illumos-gate@ae24175b2bae24175b2bhttps://www.illumos.org/issues/6391
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
64d7b6cf75
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Cyril Plisko <cyril.plisko@mountall.com>
illumos/illumos-gate@f9eb9fdf19f9eb9fdf19https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50:
29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@aab8072633aab8072633https://www.illumos.org/issues/7147
Here's the dbuf we're currently reading:
966f200::dbuf
addr object lvl blkid holds os
966f200 4 0 0 1 ztest/ds_3
966f200::print dmu_buf_t db_data
db_data = 0x9ae0400
0x9ae0400/10J
0x9ae0400: c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d
The pattern we're expecting is actually this: a34ae10b5f2db2. If we attempt to
read the block on disk we find that it has matches what ztest_ddt_repair()
would have written:
~c1c7ced932020d=J
ff3e383126cdfdf2
966f200::print dmu_buf_impl_t db_blkptr | ::blkptr
DVA0=<0:71d3c00:800>
[L0 UINT64_OTHER] SHA256 OFF LE contiguous dedup single
size=400L/400P birth=55L/55P fill=1
cksum=18486450d3ce8c6d:75a72f4bbf117b0f:2d3a226314eb5650:2eb0fd68648b1af0
1. zdb -U /rpool/tmp/zpool.cache -R ztest 0:71d3c00:800 | head
Found vdev type: mirror
0:71d3c00:800
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
000000: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000010: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000020: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000030: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000040: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000050: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@926549256b926549256bhttps://www.illumos.org/issues/7086
In dbuf_dirty(), we need to grab the dn_struct_rwlock before looking at the
db_blkptr, to prevent it from being changed by syncing context.
Otherwise we may see that ztest got a segfault from this stack:
libzpool.so.1`dva_get_dsize_sync+0x98(872f000, b32b240, fed7811b, 0, b4cda20, 0)
libzpool.so.1`bp_get_dsize+0x60(872f000, b32b240, 0, 97cb780, 9d4c1a8, 0)
libzpool.so.1`dbuf_dirty+0x9b3(ce0a100, 97cb780, 9, fecd2530)
libzpool.so.1`dmu_buf_will_dirty+0xc3(ce0a100, 97cb780, ea293d6c, 1)
libzpool.so.1`zap_lockdir+0x1a0(8aaa3c0, 1, 0, 97cb780, 1, 1)
libzpool.so.1`zap_remove_norm+0x30(8aaa3c0, 1, 0, 8728b10, 0, 97cb780)
libzpool.so.1`zap_remove+0x29(8aaa3c0, 1, 0, 8728b10, 97cb780, a)
ztest_replay_remove+0x225(ea294588, 8728ae8, 0, 38010000, 0, 0)
ztest_remove+0x9f(ea294588, ea293f50, 4, 3)
ztest_object_init+0x78(ea294588, ea293f50, 4e0, 1)
ztest_dmu_object_alloc_free+0x71(ea294588, 13)
ztest_dmu_objset_create_destroy+0x224(80cef08, 13, 0, 805d36c, 9017ad44, 0)
ztest_execute+0x89(a, 807c720, 13, 0)
ztest_thread+0xea(13, 0, 0, 0)
libc.so.1`_thrp_setup+0x88(f0983240)
libc.so.1`_lwp_start(f0983240, 0, 0, 0, 0, 0)
Looking into it a bit, we see that this is an embedded blockpointer, so
BP_GET_NDVAS should have returned 0:
b32b240::blkptr
EMBEDDED [L0 ZAP_OTHER] et=0 LZ4 size=200L/4aP birth=80L
Instead, it looks like another thread is modifying this blockpointer:
b32b240::ugrep | ::whatis
f47a0e0c is in [ stack tid=0x19f ]
ebd6ec40 is in [ stack tid=0x226 ]
ea293bd0 is in [ stack tid=0x244 ]
ea293be4 is in [ stack tid=0x244 ]
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@c39a2aae1ec39a2aae1ehttps://www.illumos.org/issues/7072
upstream:
38733 zfs fails to expand if lun added when os is in shutdown state
DLPX-36910 spares and caches should not display expandable space
DLPX-39262 vdev_disk_open spam zfs_dbgmsg buffer
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@4b5c8e93ca4b5c8e93cahttps://www.illumos.org/issues/7104
The current default indirect block size is 16KB. We can improve
performance by increasing it to 128KB. This is especially helpful for
any workload that needs to read most of the metadata, e.g.
scrub/resilver, file deletion, filesystem deletion, and zfs send.
We also need to fix a few space estimation errors to make the tests
pass.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@25f7d993ad25f7d993adhttps://www.illumos.org/issues/7071
upstream
DLPX-40482 lzc_snapshot does not fill in errlist on ENOENT
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@759e89be35759e89be35https://www.illumos.org/issues/6447
I got a patch from someone who uses nvpair code outside of illumos. It fixes a
couple of gcc warnings/bugs for him.
1. silence uninitialized use warnings
2. add parentheses around assignment used as truth value
3. fix printf format specifier (ll is for integers only)
4. strstr, strspn, strcspn, and strcmp are declared in string.h, not
strings.h.
5. avoid scanning integer into boolean variable
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Steve Dougherty <sdougherty@barracuda.com>
illumos/illumos-gate@10e67aa0db10e67aa0dbhttps://www.illumos.org/issues/7082
upstream
DLPX-40542 bptree_iterate() passes wrong args to zfs_dbgmsg()
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9adfa60d489adfa60d48https://www.illumos.org/issues/6314
Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but
dsl_dataset_name copies the datasets' name PLUS the snapshot name to it,
resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@f83b46baf9f83b46baf9https://www.illumos.org/issues/6872
We compile the zfs libraries with -Wno-uninitialized. We should remove
this. Change makefiles, fix new warnings, fix pbchk errors.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@8808ac5dae8808ac5daehttps://www.illumos.org/issues/4521
zfstest is trying to execute evil "zfs unmount -a", which fails (fortunately,
as it would otherwise leave me with my ~ missing):
03:44:11.86 cannot unmount '/export/home/yuri': Device busy cannot unmount '/
export/home': Device busy
03:44:11.86 ERROR: /usr/sbin/zfs unmount -a exited 1
This affects, at least, zfs_mount_009_neg and zfs_mount_all_001_pos, both
failing on that step. The pool containing the /export/home hierarchy is
included in KEEP variable, but it doesn't seem to affect anything here.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
illumos/illumos-gate@6fdcb3d1c26fdcb3d1c2https://www.illumos.org/issues/5813
Lets pull in this patch from freebsd:
http://svnweb.freebsd.org/base?view=revision&revision=271764
zfs_setprop_error(): Handle errno value E2BIG.
This errno value is emitted by dsl_props_set_check() in
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c, and
is used to mean that the property value is too long. For the record,
the maximum length is ZAP_MAXVALUELEN, which is 8*1024 bytes.
Instead of claiming an unknown error (and abort()ing), provide
something more specific to the scenario involved. As far as I
can tell, E2BIG is not emitted for any other scenario.
MFC after: 1 week
Sponsored by: Spectra Logic
Affects: All ZFS versions starting 27 Feb 2009 (illumos ccba0801)
This change modified the value returned by
dsl_props_set_check(), so that it can distinguish between
a name that's too long and a value that's too long, but
libzfs was not updated accordingly.
MFSpectraBSD: r1051499 on 2014/03/28 11:07:59
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Will Andrews <will@freebsd.org>
illumos/illumos-gate@4cde22c2994cde22c299https://www.illumos.org/issues/6873
lzc_destroy_snaps() returns an nvlist in errlist.
zfs_destroy_snaps_nvl() should nvlist_free() it before returning.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@20fea7a47420fea7a474https://www.illumos.org/issues/6879
In libzfs_sendrecv, there's a typo:
case DRR_SPILL:
if (byteswap) {
drr->drr_u.drr_write.drr_length =
BSWAP_64(drr->drr_u.drr_spill.drr_length);
}
Instead of drr_write.drr_length, we should be assigning the result of the
byteswap to drr_spill.drr_length.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
illumos/illumos-gate@4a20c933b14a20c933b1https://www.illumos.org/issues/6111
If you create a zfs child folder, zfs send returns an error when a recursive
incremental send is done between two snapshots made prior to the folder
creation.
The problem can be reproduced with the following steps.
root@zfs:/# zfs create pool/test
root@zfs:/# zfs snapshot pool/test@snap1
root@zfs:/# zfs snapshot pool/test@snap2
root@zfs:/# zfs create pool/test/child
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap2 > /dev/null
WARNING: could not send pool/test/child@snap2: does not exist
WARNING: could not send pool/test/child@snap2: does not exist
root@zfs:/# echo $?
1
root@zfs:/# zfs snapshot -r pool/test@snap3
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
root@zfs:/# zfs send -R -I pool/test@snap2 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
Since pool/test/child was created after snap2, zfs send should not expect snap2
to be in pool/test/child when doing a recursive send. It should examine the
compare the creation time of the snapshot and each child folder to decide if
the folder will be sent. The next incremental send between snap2 and snap3
would properly create the child folder and snap3 which first appears in the
child folder.
The problem is identical if '-i' is used instead of '-I'.
Reviewed by: Alex Aizman alex.aizman@nexenta.com
Reviewed by: Alek Pinchuk alek.pinchuk@nexenta.com
Reviewed by: Roman Strashkin roman.strashkin@nexenta.com
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Alex Deiter <alex.deiter@nexenta.com>
illumos/illumos-gate@20a95fb2c420a95fb2c4https://www.illumos.org/issues/5768
zfsctl_snapshot_inactive() leaks a hold on the dvp (directory vnode) if v_count > 1.
reproduce by:
create a fs with 100 snapshots.
have a thread do:
while true; do ls -l /test/snaps/.zfs/snapshot >/dev/null; done
have another thread do:
while true; do zfs promote test/clone; zfs promote test/snaps; done
use dtrace to delay & observe:
dtrace -w -xd \\
-n 'vn_rele:entry/args0 == (void*)0xffffff01dd42ce80ULL/{[stack()]=count();
chill(100000);}' \\
-n 'zfsctl_snapshot_inactive:entry{ if (args[0]->v_count > 1) trace(args[0]-
>v_count); self->vp=args[0];}' \\
-n 'gfs_vop_inactive:entry/callers["zfsctl_snapshot_inactive"]/{self->good=1;
[stack()]=count()}' \\
-n 'zfsctl_snapshot_inactive:return{if (self->good) self->good=0; else printf
("bad return");}' \\
-n 'gfs_dir_lookup:return/callers["zfsctl_snapshot_inactive"] && self->vp-
>v_count > 1/{trace(self->vp->v_count)}'
the address is found by selecting one of the output of this at random:
dtrace -n 'zfsctl_snapshot_inactive:entry{print(args[0]);'
when you see "bad return", we have hit the bug. Then doing "zfs umount test/
snaps" will fail with EBUSY.
When we hit this case, we also leak the hold on the target vnode (vn). When the
inactive callback is called on a vnode with v_count > 1, it needs to be
decremented.
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Rich Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@0c779ad4240c779ad424https://www.illumos.org/issues/7054
upstream:
ee0003de7d3e598499be7ac3fe6b61efcc47cb7f
DLPX-40399 dmu_tx_hold_t should use refcount_t to track space
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@99189164df99189164dfhttps://www.illumos.org/issues/6940
Similar to #6334, but this time with empty directories:
$ zfs create tank/quota
$ zfs set quota=10M tank/quota
$ zfs snapshot tank/quota@snap1
$ zfs set mountpoint=/mnt/tank/quota tank/quota
$ mkdir /mnt/tank/quota/dir # create an empty directory
$ mkfile 11M /mnt/tank/quota/11M
/mnt/tank/quota/11M: initialized 9830400 of 11534336 bytes: Disc quota exceeded
$ rmdir /mnt/tank/quota/dir # now unlink the empty directory
rmdir: directory "/mnt/tank/quota/dir": Disc quota exceeded
From user perspective, I would expect that ZFS is always able to remove files
and directories even when the quota is exceeded.
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Simon Klinkert <simon.klinkert@gmail.com>
7020 sdev_cleandir can loop forever
Note that the bulk of the upstream change is not applicable to FreeBSD
and the affected files are not even in the vendor area.
illumos/illumos-gate@45b174751545b1747515https://www.illumos.org/issues/7019
Currently zfsdev_ioctl, when confronted by a request with the FKIOCTL flag set,
skips all processing of secpolicy functions. This means that ZFS is not doing
any kind of verification of the credentials or access rights of the caller and
assuming that (as it is an in-kernel client) all such checks have already been
done.
This turns out to be quite a dangerous assumption, especially with respect to
sdev. In general I don't think it's particularly reasonable to offload this
enforcement of access rights onto other kernel subsystems when ZFS has some
particular local semantics in this area (delegated datasets etc) and does not
provide any kind of API to allow other subsystems to avoid code duplication
when doing it. ZFS should apply its normal access policy to requests from
within the kernel, and callers should take care to give it the correct
credentials and call it from the correct context in order to get the results
they need.
You can observe the currently unfortunate consequences of this bug in any non-
global zone that has access to /dev/zvol or any subset of it via sdev profiles.
In particular, a zone used to contain a KVM or similar which has a single zvol
passed through to it using a <device match= block in its zone XML.
Even though sdev makes something of an attempt to control for whether the
caller should have access to nodes in /dev/zvol, it doesn't do this correctly,
or really at all in the lookup call path. So, if we have a zone that's been
given access to any part of /dev/zvol, it can simply look up the full path to
any other zvol on the entire system, and the node will appear and be able to be
used.
https://www.illumos.org/issues/7020
sdev_cleandir can currently hang forever when it encounters a child node that
is busy, or when it is given a matching expr and the first entry on the list
does not match.
The previous code (circa 2013) iterated over the children of the node using a
for loop with SDEV_NEXT_ENTRY, which was then changed to a while ((dv =
SDEV_FIRST_ENTRY(ddv)) { loop. Unfortunately the continue statements that
previously made it skip over an entry were left as they were, which now result
in an infinite busy-loop in the kernel.
You can trigger this pretty easily by setting up an sdev exclude rule in
zonecfg.
Diagnosis: look for a runaway process consuming 100% CPU in kernel -- they have
a distinctive stack:
# mdb -k
> 0t1234::pid2proc | ::walk thread | ::findstack -v
[ ffffd001efcd3310 _resume_from_idle+0x112() ]
ffffd001efcd3360 apix_hilevel_intr_epilog+0xc1(ffffd001efcd33d0, 0)
ffffd001efcd33c0 apix_do_interrupt+0x34a(ffffd001efcd33d0, 0)
ffffd001efcd33d0 _sys_rtt_ints_disabled+8()
ffffd001efcd3550 rw_enter+0x58()
ffffd001efcd35e0 sdev_cleandir+0x60(ffffd0631b6d75d8, 0, 0)
ffffd001efcd3630 devzvol_prunedir+0xec(ffffd0631b6d76e8)
ffffd001efcd36d0 devzvol_readdir+0x150(ffffd06333250e00, ffffd001efcd3790,
ffffd062dc990e18, ffffd001efcd37dc, 0, 0)
ffffd001efcd3760 fop_readdir+0x6b(ffffd06333250e00, ffffd001efcd3790,
ffffd062dc990e18, ffffd001efcd37dc, 0, 0)
ffffd001efcd3830 walk_dir+0xee(ffffd06333250e00, ffffd0669e4483c8,
fffffffffbbdf410)
ffffd001efcd3850 prof_make_names_walk+0x2e(ffffd0669e4483c8,
fffffffffbbdf410)
ffffd001efcd38b0 prof_make_names+0xfc(ffffd0669e4483c8)
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@63364b0ee263364b0ee2https://www.illumos.org/issues/6922
ZFS does not do a config_sync after removing an aux (spare, log, or cache)
device. AFAICT this isn't being done because it is slow and was deemed
unnecessary. However, it should be such a rare operation that speed doesn't
matter, and not doing it results in two problems:
1) It is theoretically possible to remove an aux device from one pool and
attach it to another, then lose power. When power is restored, both pools would
think that they own the aux device.
2) Removal of the aux device doesn't send any useful sysevents to userland.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alan Somers <asomers@gmail.com>
