vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
but returned them incorrectly, causing tar to actually
erase the resulting file while trying to restore the
link. This one-line fix corrects the hardlink descriptions
to avoid this problem.
Thanks to Jung-uk Kim for pointing this out.
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
in up to 16 (KI_NGROUPS) values and steal a bit from ki_cr_flags
(all bits currently unused) to indicate overflow with the new flag
KI_CRF_GRP_OVERFLOW.
This fixes procstat -s.
Approved by: re (kib)
without VIMAGE virtualization in the kernel.
If we cannot resolve a symbol try to see if we can find it with
prefix of the virtualized subsystem, currently only "vnet_entry"
by identifying either the vnet of the current process for a
live system or the vnet of proc0 (or of dumptid if compiled
in a non-default way).
The way this is done currently allows us to only touch libkvm
but no single application. Once we are going to virtualize more
subsystems we will have to review this decision for better scaling.
Submitted by: rwatson (initial version of kvm_vnet.c, lots of ideas)
Reviewed by: rwatson
Approved by: re (kib)
other than the current system-wide size (32-bits) has been updated so
for now just cautiously turn the check off. While here fix the check
for IDs being too large which doesn't work due to type mis-matches.
Reviewed by: jhb (previous version)
Approved by: re (kib)
MFC after: 1 month (type mis-match fixes only)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
structs had incorrect member offsets, limiting dtrace's usefulness
when working with them. An example of incorrect info (struct
rtentry) from before this fix:
<1738> STRUCT rtentry (200 bytes)
rt_nodes type=1731 off=0
rt_gateway type=849 off=65280 <== WRONG, should be 8 * 96
rt_flags type=3 off=65344 <== wrong again, and so on..
...
Approved by: re (kib), gnn (mentor)
MFC after: 2 weeks
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
behavior is mandated by POSIX.
- Do not fail requests that pass a length greater than SSIZE_MAX
(such as > 2GB on 32-bit platforms). The 'len' parameter is actually
an unsigned 'size_t' so negative values don't really make sense.
Submitted by: Alexander Best alexbestms at math.uni-muenster.de
Reviewed by: alc
Approved by: re (kib)
MFC after: 1 week
Right now nmemb is returned when size is 0. In newer versions of the
standards, it is explicitly required that fwrite() should return 0.
Submitted by: Christoph Mallon
Approved by: re (kib)
- Fix possible uninitialised variables and null derefs
- Support big transfers
- Various bug fixes and style changes
Submitted by: Sylvestre Gallon
Sponsored by: Google Summer of Code 2009
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
The most notable is that it is not bumped in rwlock_rdlock_common() when
the hard path (__thr_rwlock_rdlock()) returns successfully.
This can lead to deadlocks in libthr when rwlocks recursion in read mode
happens.
Fix the interested parts by correctly handling rdlock_count.
PR: threads/136345
Reported by: rink
Tested by: rink
Reviewed by: jeff
Approved by: re (kib)
MFC: 2 weeks
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC generates
local calls to this function which result in absolute relocations put into
position-independent code segment, making dynamic loader do extra work everys
time given shared library is being relocated and making affected text pages
non-shareable.
Reviewed by: kib
Approved by: re (kensmith)
This adds the following functions to the acl(3) API: acl_add_flag_np,
acl_clear_flags_np, acl_create_entry_np, acl_delete_entry_np,
acl_delete_flag_np, acl_get_extended_np, acl_get_flag_np, acl_get_flagset_np,
acl_set_extended_np, acl_set_flagset_np, acl_to_text_np, acl_is_trivial_np,
acl_strip_np, acl_get_brand_np. Most of them are similar to what Darwin
does. There are no backward-incompatible changes.
Approved by: rwatson@
part of libc is still not thread safe but this would at least
reduce the problems we have.
PR: threads/118544
Submitted by: Changming Sun <snnn119 gmail com>
MFC after: 2 weeks
- The uid/cuid members of struct ipc_perm are now uid_t instead of unsigned
short.
- The gid/cgid members of struct ipc_perm are now gid_t instead of unsigned
short.
- The mode member of struct ipc_perm is now mode_t instead of unsigned short
(this is merely a style bug).
- The rather dubious padding fields for ABI compat with SV/I386 have been
removed from struct msqid_ds and struct semid_ds.
- The shm_segsz member of struct shmid_ds is now a size_t instead of an
int. This removes the need for the shm_bsegsz member in struct
shmid_kernel and should allow for complete support of SYSV SHM regions
>= 2GB.
- The shm_nattch member of struct shmid_ds is now an int instead of a
short.
- The shm_internal member of struct shmid_ds is now gone. The internal
VM object pointer for SHM regions has been moved into struct
shmid_kernel.
- The existing __semctl(), msgctl(), and shmctl() system call entries are
now marked COMPAT7 and new versions of those system calls which support
the new ABI are now present.
- The new system calls are assigned to the FBSD-1.1 version in libc. The
FBSD-1.0 symbols in libc now refer to the old COMPAT7 system calls.
- A simplistic framework for tagging system calls with compatibility
symbol versions has been added to libc. Version tags are added to
system calls by adding an appropriate __sym_compat() entry to
src/lib/libc/incldue/compat.h. [1]
PR: kern/16195 kern/113218 bin/129855
Reviewed by: arch@, rwatson
Discussed with: kan, kib [1]
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
