Let firmware do its best first, and if it can't, try software recovery.
I would remove software timeout handler completely, but found bunch of
complains on command timeout on sparc64 mailing list few years ago, so
better be safe in case of interrupt loss.
MFC after: 2 weeks
For 24xx and above use 2 vectors (default and response queue).
For 26xx and above use 3 vectors (default, response and ATIO queues).
Due to global lock interrupt hardlers never run simultaneously now, but
at least this allows to save one regitster read per interrupt.
MFC after: 2 weeks
Since we support RQSTYPE_RPT_ID_ACQ, that functionality is only useful
in loop mode, which probably doesn't worth having this hack in 2017.
MFC after: 2 weeks
There were two copies of the code: one in generic code was half-broken, and
another in platform code was never called. Leave only one in generic code
and working.
MFC after: 2 weeks
Instead of single isp_intr() function doing all possible magic, introduce
four different functions to handle mailbox operation completions, async
events, response and ATIO queues. The goal is to isolate different code
paths to make code more readable, and to make easier support for multiple
interrupt vectors. Even oldest hardware in many cases can identify what
code path it should run on interrupt. Contemporary hardware can assign
them to different interrupt vectors.
MFC after: 2 weeks
It was implemented to reduce context switches when uploading firmware to
card's RAM. But this mechanism is not used last 10 years since all mbox
operations are now polled, and it was never used for cards produced in
last 15 years. Newer cards can use DMA to upload firmware.
MFC after: 2 weeks
This change fixes DMA resource leak on driver unload. Also it removes
DMA resources allocation for hardcoded number of requests before fetching
the real number from firmware. Also it prepares ground for more flexible
IRQs allocation according to firmware capabilities.
MFC after: 2 weeks
Its more important for SPI HBAs, as they don't support CDBs above 12 bytes.
The new error code makes CAM to fall back to alternative commands.
MFC after: 2 weeks
This allows to properly handle cases when target wants to receive or send
more data then initiator wants to send or receive. Previously in such
cases isp(4) returned CAM_DATA_RUN_ERR, while now it returns resid > 0.
MFC after: 2 weeks
- Move private data about ATIOs/INOTs from per-LUN to per-channel data.
This allows active commands to continue operation after LUN destruction.
This also simplifies lookup of the data by tag in some situations.
- Unify three restart_queue processing implementations.
- Complete all ATIOs from restart_queue on LUN disable.
- Delete ATIO private data when command completed or aborted, not depending
on the ATIO being requeued, that was ugly hack and could never happen. CAM
should always call ether XPT_CONT_TARGET_IO with status or XPT_ABORT.
- Implement XPT_ABORT for queued ATIOs/INOTs to allow CAM do graceful
shutdown, not depending on LUN disable, as it is done in ahd(4)/targ(4).
- Unify isp_endcmd() arguments to make it more usable in generic code.
- Remove never really used LUN state reference counter.
MFC after: 2 weeks
For some reason isp_handle_platform_notify_fc() allocated INOT just
before calling isp_handle_platform_target_tmf(), which also allocates
INOT. It seems to be a braino introduced in r196008.
MFC after: 2 weeks
All resources lack of which may put CTIO into the queue are either
per-channel or potentially per-queue, but none of them are per-LUN.
This is a first step to fix live LUN disabling. Before this change
any CTIOs held in a queue in time of disabling were just leaked.
MFC after: 2 weeks
The isp(4) driver was changing the tag type for REQUEST SENSE
commands to Head of Queue, when the CAM CCB flag
CAM_TAG_ACTION_VALID was NOT set. CAM_TAG_ACTION_VALID is set
when the tag action in the XPT_SCSI_IO is not CAM_TAG_ACTION_NONE
and when the target has tagged queueing turned on.
In most cases when CAM_TAG_ACTION_VALID is not set, it is because
the target is not doing tagged queueing. In those cases, trying to
send a Head of Queue tag may cause problems. Instead, default to
sending a simple tag.
IBM tape drives claim to support tagged queueing in their standard
Inquiry data, but have the DQue bit set in the control mode page
(mode page 10). CAM correctly detects that these drives do not
support tagged queueing, and clears the CAM_TAG_ACTION_VALID flag
on CCBs sent down to the drives.
This caused the isp(4) driver to go down the path of setting the
tag action to a default value, and for Request Sense commands only,
set the tag action to Head of Queue.
If an IBM tape drive does get a Head of Queue tag, it rejects it with
Invalid Message Error (0x49,0x00). (The Qlogic firmware translates that
to a Transport Error, which the driver translates to an Unrecoverable
HBA Error, or CAM_UNREC_HBA_ERROR.) So, by default, it wasn't possible
to get a good response from a REQUEST SENSE to an FC-attached IBM
tape drive with the isp(4) driver.
IBM tape drives (tested on an LTO-5 with G9N1 firmware and a TS1150
with 4470 firmware) also have a bug in that sending a command with a
non-simple tag attribute breaks the tape drive's Command Reference
Number (CRN) accounting and causes it to ignore all subsequent
commands because it and the initiator disagree about the next
expected CRN. The drives do reject the initial command with a head
of queue tag with an Invalid Message Error (0x49,0x00), but after that
they ignore any subsequent commands. IBM confirmed that it is a bug,
and sent me test firmware that fixes the bug. However tape drives in
the field will still exhibit the bug until they are upgraded.
Request Sense is not often sent to targets because most errors are
reported automatically through autosense in Fibre Channel and other
modern transports. ("Modern" meaning post SCSI-2.) So this is not
an error that would crop up frequently. But Request Sense is useful on
tape devices to report status information, aside from error reporting.
This problem is less serious without FC-Tape features turned on,
specifically precise delivery of commands (which enables Command
Reference Numbers), enabled on the target and initiator. Without
FC-Tape features turned on, the target would return an error and
things would continue on.
And it also does not cause problems for targets that do tagged
queueing, because in those cases the isp(4) driver just uses the
tag type that is specified in the CCB, assuming the
CAM_TAG_ACTION_VALID flag is set, and defaults to sending a Simple
tag action if it isn't an ordered or head of queue tag.
sys/dev/isp/isp.c:
In isp_start(), don't try to send Request Sense commands
with the Head of Queue tag attribute if the CCB doesn't
have a valid tag action. The tag action likely isn't valid
because the target doesn't support tagged queueing.
Sponsored by: Spectra Logic
MFC after: 3 days
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
