Commit Graph

10369 Commits

Author SHA1 Message Date
Jens Schweikhardt
26cd969f5e Correct a grammo and capitalize a few abbreviations. 2005-11-12 21:45:20 +00:00
Paul Saab
cad572c41b Update PCI ids to add the E200, E200i, P400, and P400i storage
controllers.  Remove the E400 since it is not a real product.

Submitted by:	HP
2005-11-11 16:45:33 +00:00
Jean-Yves Lefort
d0d5f05bff List /boot/device.hints entries for the second joystick.
Approved by:	joel
2005-11-11 12:53:37 +00:00
Ruslan Ermilov
6d8200ff0c Add /dev/speaker support to amd64.
The following repo-copies were made (by Mark Murray):

sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c
sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h
share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
2005-11-11 09:57:32 +00:00
Tim Kientzle
4a483830a2 Use .Nx macro for NetBSD.
Thanks to: Ruslan Ermilov
2005-11-10 15:42:51 +00:00
Hartmut Brandt
c6adb7badd s/Three file/Three files/
Submitted by:	ru
2005-11-10 13:12:06 +00:00
Hartmut Brandt
da41a1d420 Remove hard sentence breaks. Correct the width calculation for the list
indent.

Submitted by:	ru
2005-11-10 12:08:17 +00:00
Hartmut Brandt
af1fee9b7c Don't include bsd.init.mk so early - it's just not needed here.
Use . instead of ${.OBJDIR}.
Move DEFSDIR and BMIBSDIR under the resp. .if clauses so that they
get defined only if DEFS and BMIBS are defined.

Submitted by:	ru
2005-11-10 12:07:12 +00:00
Hartmut Brandt
59ee90cb1a This is a short man page which describes bsd.snmpmod.mk. It documents
only the features that this file layers on top of bsd.lib.mk and should
therefore cross-reference to bsd.lib.mk, which doesn't exist.
2005-11-10 10:09:42 +00:00
Hartmut Brandt
3c2659d809 Add a .mk file for building modules for the SNMP daemon. This may be
use in-tree as well as for 3rd party modules. This file is more or less
what was in usr.sbin/bsnmpd/modules/Makefile.inc with some modifications
and omissions. Usage examples can be found under usr.sbin/bsnmpd/modules/*.

Idea by:	phk
2005-11-10 10:03:22 +00:00
Tim Kientzle
2d8e1893d4 Credit NetBSD as the source for the /rescue concept.
While I'm here, update my own email address.

Thanks to: Luke Mewburn for pointing out the oversight.
2005-11-10 06:36:06 +00:00
Pav Lucistnik
ca965aa706 Add new ports-net-im collection. 2005-11-09 10:16:26 +00:00
Vinod Kashyap
90e0829525 Added list of supported 9xxxSX models. 2005-11-09 00:23:54 +00:00
Philip Paeps
07a61baefe Change author's email address.
Submitted by:	Sean Bullington shegget -at- gmail.com
2005-11-06 00:41:41 +00:00
Ralf S. Engelschall
9f9e9e1b8d Update list of controllers ciss(4) driver
actually supports according to implementation.

Submitted by: Christoph Schug <chris@schug.net>
MFC after: 1 week
2005-11-03 13:02:35 +00:00
Ruslan Ermilov
6660f1d7c1 Serialize access to the info/dir file; needed for parallel installs.
Reported by:	scottl

I'm not very fond of using the non-standard lockf(1) here, but I
have no better idea at the moment.  NetBSD uses ln(1) to create a
lock file, but this approach can result in a deadlock if make is
interrupted, leaving an orphaned lock file.
2005-11-03 08:56:39 +00:00
Maxim Konovalov
fe35a11a2b o NetBSD 2.0.3 and NetBSD 2.1 added.
Obtained from:	NetBSD
MFC after:	3 days
2005-11-03 08:06:06 +00:00
Maxim Konovalov
b9bc21b20b Merge from RELENG_6: FreeBSD 6.0. Not sure the release date is correct
because no release announce yet.
2005-11-03 07:59:58 +00:00
Ruslan Ermilov
41d2125edb Fix .Dd argument. 2005-11-03 07:26:54 +00:00
Maxim Konovalov
69fdf27869 o OpenBSD 3.8 added. 2005-11-01 10:32:42 +00:00
Ruslan Ermilov
ee042e1ba6 Document NGM_IFACE_GET_IFINDEX. 2005-10-28 19:05:44 +00:00
Ruslan Ermilov
c2888a85bc Belatedly document the NGM_KSOCKET_ACCEPT ("accept") control message. 2005-10-28 14:15:54 +00:00
John Baldwin
518bf2dcc7 Update example libmap.conf file:
- Remove pointless examples that map libpthread to itself.
- Update shared libraries for 6.0 bumps.

Reported by:	rwatson
MFC after:	1 day
2005-10-27 16:59:02 +00:00
John Baldwin
90e2fc863a Spell 'argument' correctly.
Submitted by:	Andre Guibert de Bruet andy at siliconlandmark dot com
2005-10-26 17:39:35 +00:00
Yaroslav Tykhiy
8d52cc90fb Use consistent punctuation and vertical indenting around .Dl's.
Wrap a too long line.
2005-10-26 04:20:18 +00:00
Yaroslav Tykhiy
5a3c72ce8f Document that `reload' is not provided by default
yet it can be enabled when applicable.
2005-10-26 04:12:34 +00:00
Christian Brueffer
6a38205e3d Xref polling(4). 2005-10-25 18:57:03 +00:00
Maxim Konovalov
7c802bac72 s/RADUIS/RADIUS/
Submitted by:	jisakiel@yahoo.es
MFC after:	1 week
2005-10-23 19:37:55 +00:00
Gleb Smirnoff
463a11c662 Fix typo from last commit.
Submitted by:	simon
2005-10-22 20:47:38 +00:00
Gleb Smirnoff
66b1745e3e Add bge(4) to the list of supported devices. 2005-10-22 14:38:52 +00:00
Tom Rhodes
bf148c3eaf A better, more correct explination of NO_SHARED. This could probably
use a quick touch up, but at least it's correct.

Requested by:	ru
2005-10-22 10:24:53 +00:00
SUZUKI Shinsuke
743eee666f sync with KAME regarding NDP
- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month
2005-10-21 16:23:01 +00:00
Andrey A. Chernov
8fc5a80ac3 xterm-basic: add AX flag
(the same in xterm-supplied termcap)
2005-10-18 16:11:48 +00:00
John Baldwin
e26af7a74a Remove a spurious newline. The TAILQ_INIT() is part of the 'faster tailq
deletion' example.

MFC after:	1 week
2005-10-17 17:53:17 +00:00
Bjoern A. Zeeb
e08d691ba3 Document that changes to nsswitch.conf might be needed when
compiling with NO_NIS.
[ also see make.conf(5) and nsswitch.conf(5) ]

Reviewed by:    ru
Requested by:   dougb (and bin/87221)
MFC:            22 days
2005-10-17 17:01:54 +00:00
Andrey A. Chernov
34d990f73c xterm-basic:
1) use standard vt100 as/ae instead of ^N/^O which not works in real xterm
2) Remove ^O from me, it not belongs there
2005-10-17 06:09:56 +00:00
Ruslan Ermilov
b122ac0407 Remove redundant (in FreeBSD) include. 2005-10-14 15:45:38 +00:00
Joel Dahl
3a22b03d6c Add support for ATI IXP[234]00. 2005-10-13 18:28:26 +00:00
Xin LI
9803e24996 Mention that hptmv(4) actually works for the amd64 platform as well.
Suggested by:	Mikhail Teterin [mi+mx aldan algebra com]
Submitted by:	me
PR:		docs/87302
2005-10-13 17:20:06 +00:00
John Baldwin
2ddd41fbec - Clarify when the softc is allocated. It is allocated when a device is
probed and attached, not on the first call to device_get_softc().
- Add a cross reference to DEVICE_PROBE regarding the caveats of using the
  softc in a driver's probe routine.
- Fix a grammar bogon.

PR:		docs/87176 (1)
Submitted by:	Devon H. O'Dell dodell at offmyserver dot com (1)
MFC after:	3 days
2005-10-13 16:57:53 +00:00
John Baldwin
10ebc7c038 - When bintime was added to this manpage, standalone .Nm changed from
microtime to bintime.  However, one standaline .Nm wasn't changed, and as
  a result, the manpage claimed that bintime was added in both 5.0 and 3.0.
  Fix by listing microtime explicitly.
- Fix a grammar bogon.

PR:		docs/87147 (1)
Submitted by:	Matthew Luckie (1)
MFC after:	3 days
2005-10-13 16:01:28 +00:00
Bjoern A. Zeeb
33cd26c2ca Document that changes to nsswitch.conf might be needed when
compiling with NO_NIS.

PR:		bin/87221
Reviewed by:	simon
MFC after:	4 weeks
2005-10-12 19:05:22 +00:00
Yaroslav Tykhiy
250da51b4b Record sk(4) as having native support for extended VLAN frames.
PR:		kern/79998
MFC after:	1 month
2005-10-11 22:59:01 +00:00
Giorgos Keramidas
d3d902048c Fix a syntax nit (superfluous 'a').
Submitted by:	Anders Hanssen <anders@rethink.no>
2005-10-11 16:05:35 +00:00
Joel Dahl
475b5abcb7 - Xref snd_mss(4).
-  Remove a few items from the HARDWARE list.  This support is
   already described in the snd_mss(4) manual page.
2005-10-10 17:49:40 +00:00
Joel Dahl
8be03f2496 Add manual page for snd_mss(4) and hook it up to the build.
Reviewed by:	brueffer
2005-10-10 17:46:43 +00:00
Ceri Davies
0dc624236a Correct typo.
Discussed with:	glebius
2005-10-10 15:25:39 +00:00
Gleb Smirnoff
b5db9fa7d1 - Note that ng_iface(4) now supports ALTQ.
- Explain when ALTQ should be used on ng_iface(4) and when not.
2005-10-10 15:14:37 +00:00
Yaroslav Tykhiy
08b9134350 Replace "/etc/make.conf" with references to make.conf(5)
where applicable.  The main reason for this change is that
the location of make.conf is not constant and can be
modified via __MAKE_CONF.  This change also improves
hyper-text linkage in our manpages.

MFC after:	2 weeks
2005-10-10 14:55:59 +00:00
Yaroslav Tykhiy
253c3c7312 Clarify the usage and effects of sys.mk, make.conf(5), and __MAKE_CONF.
MFC after:	2 weeks
2005-10-10 14:49:55 +00:00