A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
This is done so that the thread state changes during the switch
are not confused with the thread state changes reported when the thread
spins on a lock.
Here is an example, three consecutive entries for the same thread (from top to
bottom):
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"sleep", attributes: prio:84, wmesg:"-", lockname:"(null)"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"spinning", attributes: lockname:"sched lock 1"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"running", attributes: none
The above trace could leave an impression that the final state of
the thread was "running".
After this change the sleep state will be reported after the "spinning"
and "running" states reported for the sched lock.
Reviewed by: jhb, markj
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9961
Something evidently got mangled in my git tree in between testing and
review, as an old and broken version of the patch was apparently submitted
to svn. Revert this while I work out what went wrong.
Reported by: tuexen
Pointy hat to: rstone
When a high-priority thread is waiting for a mutex held by a
low-priority thread, it temporarily lends its priority to the
low-priority thread to prevent priority inversion. When the mutex
is released, the lent priority is revoked and the low-priority
thread goes back to its original priority.
When the priority of that thread is lowered (through a call to
sched_priority()), the schedule was not checking whether
there is now a high-priority thread in the run queue. This can
cause threads with real-time priority to be starved in the run
queue while the low-priority thread finishes its quantum.
Fix this by explicitly checking whether preemption is necessary
when a thread's priority is lowered.
Sponsored by: Dell EMC Isilon
Obtained from: Sandvine Inc
Differential Revision: https://reviews.freebsd.org/D9518
Reviewed by: Jeff Roberson (ule)
MFC after: 1 month
Commit r270423 fixed a regression in sched_yield() that was introduced
in earlier changes. Unfortunately, at the same time it introduced an
new regression. The problem is that SWT_RELINQUISH (6), like all other
SWT_* constants and unlike SW_* flags, is not a bit flag. So, (flags &
SWT_RELINQUISH) is true in cases where that was not really indended,
for example, with SWT_OWEPREEMPT (2) and SWT_REMOTEPREEMPT (11).
A straight forward fix would be to use (flags & SW_TYPE_MASK) ==
SWT_RELINQUISH, but my impression is that the switch types are designed
mostly for gathering statistics, not for influencing scheduling
decisions.
So, I decided that it would be better to check for SW_PREEMPT flag
instead. That's also the same flag that was checked before r239157.
I double-checked how that flag is used and I am confident that the flag
is set only in the places where we really have the preemption:
- critical_exit + td_owepreempt
- sched_preempt in the ULE scheduler
- sched_preempt in the 4BSD scheduler
Reviewed by: kib, mav
MFC after: 4 days
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9230
- Send IPI wakeups once SMP is started even if cold is true.
- Permit preemptions when cold is true.
These changes are needed for EARLY_AP_STARTUP.
MFC after: 2 weeks
Sponsored by: Netflix
The other CPU might resume and see a still-empty runq and go back to
sleep before sched_add() adds the thread to the runq. This results
in a lost wakeup and a potential hang if the system is otherwise
completely idle.
The race originated due to a micro-optimization (my fault) in 4BSD in
that it avoided putting a thread on the run queue if the scheduler was
going to preempt to the new thread. To avoid complexity while fixing
this race, just drop this optimization. 4BSD now always sets the
"owepreempt" flag when a preemption is warranted and defers the actual
preemption to the thread_unlock of the caller the same as ULE.
MFC after: 2 weeks
Sponsored by: Netflix
If a thread is created bound to a cpuset it might already be bound before
it's very first timeslice, and td_lastcpu will be NOCPU in that case.
MFC after: 1 week
p_sched is unused.
The struct td_sched is always co-allocated with the struct thread,
except for the thread0. Avoid useless indirection, instead calculate
td_sched location using simple pointer arithmetic in td_get_sched(9).
For thread0, which is statically allocated, create a structure to
emulate layout of the dynamic allocation.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D6711
Move it to the struct td_sched for 4BSD, removing always present
field, otherwise unused for ULE.
New scheduler method sched_estcpu() returns the estimation for
kinfo_proc consumption. As before, it always returns 0 for ULE.
Remove sched_tick() scheduler method, unused both by 4BSD and ULE.
Update locking comment for the 4BSD struct td_sched, copying it from
the same comment for ULE.
Spell MAXPRI as PRI_MAX_TIMESHARE in the 4BSD comment.
Based on some notes from, and reviewed by: bde
Sponsored by: The FreeBSD Foundation
a pcb from stoppcbs[] rather than the thread's PCB. However, exited threads
retained td_oncpu from the last time they ran, and newborn threads had their
CPU fields cleared to zero during fork and thread creation since they are
in the set of fields zeroed when threads are setup. To fix, explicitly
update the CPU fields for exiting threads in sched_throw() to reflect the
switch out and reset the CPU fields for new threads in sched_fork_thread()
to NOCPU.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3193
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
Differential Revision: https://reviews.freebsd.org/D2369
Reviewed by: kib@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
aborted, allowing other threads to run. Without this change thread is just
rescheduled again, that was illustrated by provided test tool.
PR: 192926
Submitted by: eric@vangyzen.net
MFC after: 2 weeks
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
Also directly call swapper() at the end of mi_startup instead of
relying on swapper being the last thing in sysinits order.
Rationale:
- "RUN_SCHEDULER" was misleading, scheduling already takes place at that stage
- "scheduler" was misleading, the function swaps in the swapped out processes
- another SYSINIT(SI_SUB_RUN_SCHEDULER, SI_ORDER_ANY) could never be
invoked depending on its relative order with scheduler; this was not obvious
and the bug actually used to exist
Reviewed by: kib (ealier version)
MFC after: 14 days
- remove extra dynamic variable initializations;
- restore (4BSD) and implement (ULE) hogticks variable setting;
- make sched_rr_interval() more tolerant to options;
- restore (4BSD) and implement (ULE) kern.sched.quantum sysctl, a more
user-friendly wrapper for sched_slice;
- tune some sysctl descriptions;
- make some style fixes.
the wrong direction. Before it, if preemption and end of time slice happen
same time, thread was put to the head of the queue as for only preemption.
It could cause single thread to run for indefinitely long time. r220198
handles it by not clearing TDF_NEEDRESCHED in case of preemption. But that
causes delayed context switch every time preemption happens, even when not
needed.
Solve problem by introducing scheduler-specifoc thread flag TDF_SLICEEND,
set when thread's time slice is over and it should be put to the tail of
queue. Using SW_PREEMPT flag for that purpose as it was before just not
enough informative to work correctly.
On my tests this by 2-3 times reduces run time deviation (improves fairness)
in cases when several threads share one CPU.
Reviewed by: fabient
MFC after: 2 months
Sponsored by: iXsystems, Inc.
With switchticks variable being reset each time thread preempted (that is
done regularly by interrupt threads) scheduling quantum may never expire.
It was not noticed in time because several other factors still regularly
trigger context switches.
Handle the problem by replacing that mechanism with its equivalent from
SCHED_ULE called time slice. It is effectively the same, just measured in
context of stathz instead of hz. Some unification is probably not bad.
compatible with the sched provider implemented by Solaris and its open-
source derivatives. Full documentation of the sched provider can be found
on Oracle's DTrace wiki pages.
Note that for compatibility with scripts originally written for Solaris,
serveral probes are defined that will never fire. These probes are defined
to fire when Solaris-specific features perform certain actions. As these
features are not present in FreeBSD, the probes can never fire.
Also, I have added a two probes that are not defined in Solaris, lend-pri
and load-change. These probes have been added to make it possible to
collect schedgraph data with DTrace.
Finally, a few probes are defined in Solaris to take a cpuinfo_t *
argument. As it was not immediately clear to me how to translate that to
FreeBSD, currently those probes are passed NULL in place of a cpuinfo_t *.
Sponsored by: Sandvine Incorporated
MFC after: 2 weeks
the cached name used for KTR_SCHED traces when a thread's name changes.
This way KTR_SCHED traces (and thus schedgraph) will notice when a thread's
name changes, most commonly via execve().
MFC after: 2 weeks
- Only initialize the per-cpu switchticks and switchtime in sched_throw()
for the very first context switch on APs during boot. This avoids a
small gap between the middle of thread_exit() and sched_throw() where
time is not accounted to any thread.
- In thread_exit(), update the timestamp bookkeeping to track the changes
to mi_switch() introduced by td_rux so that the code once again matches
the comment claiming it is mimicing mi_switch(). Specifically, only
update the per-thread stats directly and depend on ruxagg() to update
p_rux rather than adjusting p_rux directly. While here, move the
timestamp bookkeeping as late in the function as possible.
Reviewed by: bde, kib
MFC after: 1 week
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
be brought up in the order they are enumerated in the device tree (in
particular, that thread 0 on each core be brought up first). The SLIST
through which we loop to start the CPUs has all of its entries added with
SLIST_INSERT_HEAD(), which means it is in reverse order of enumeration
and so AP startup would always fail in such situations (causing a machine
check or RTAS failure). Fix this by changing the SLIST into an STAILQ,
and inserting new CPUs at the end.
Reviewed by: jhb
- Remove the following sysctl:
kern.sched.ipiwakeup.onecpu
kern.sched.ipiwakeup.htt2
Because they are absolutely obsolete. Probabilly the whole wakeup
forward mechanism should be revisited for a better fitting in modern
hw, in the future.
- As map2 variable is no longer used rename map3 to map2
- Fix a string by making more informative the msg and removing the
arguments passing.
Reviewed by: julian
Tested by: several
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).
Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.
The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN
while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.
Some technical notes:
- This commit may be considered an ABI nop for all the architectures
different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
accessed avoiding migration, because the size of cpuset_t should be
considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
primirally done in order to leave some more space in userland to cope
with KBI extensions). If you need to access kernel cpuset_t from the
userland please refer to example in this patch on how to do that
correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now
The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.
Tested by: pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by: jeff, jhb, sbruno
kern.sched.ipiwakeup.onecpu
kern.sched.ipiwakeup.htt2
Because they are absolutely obsolete. Probabilly the whole wakeup
forward mechanism should be revisited for a better fitting in modern
hw.
- As map2 variable is no longer used rename map3 to map2
- Fix a string by making more informative the msg and removing the
arguments passing
Approved by: julian
bound to an AP before SMP has started, the system will panic when we try
to touch per-CPU state for that AP because that state has not been
initialized yet. Fix this in the same way as ULE: place all threads in
the global run queue before SMP has started.
Reviewed by: jhb
MFC after: 1 month
too much time. This can finish in a scheduler deadlock with ping-pong
between two threads.
One sample of this is:
- device lapic (to have a preemption point on critical_exit())
- options DEVICE_POLLING with HZ>1499 (to have lapic freq = hardclock freq)
- running a cpu intensive task (that does not enter the kernel)
- only one CPU on SMP or no SMP.
As requested by jhb@ 4BSD have received the same type of fix instead of
propagating the flag to the new thread.
Reviewed by: jhb, jeff
MFC after: 1 month
- Move the realtime priority range up above kernel sleep priorities and
just below interrupt thread priorities.
- Contract the interrupt and kernel sleep priority ranges a bit so that
the timesharing priority band can be increased. The new timeshare range
is now slightly larger than the old realtime + timeshare ranges.
- Change the ULE scheduler to no longer use realtime priorities for
interactive threads. Instead, the larger timeshare range is now split
into separate subranges for interactive and non-interactive ("batch")
threads. The end result is that interactive threads and non-interactive
threads still use the same priority ranges as before, but realtime
threads now have a separate, dedicated priority range.
- Do not modify the priority of non-timeshare threads in sched_sleep()
or via cv_broadcastpri(). Realtime and idle priority threads will
no longer have their priorities affected by sleeping in the kernel.
Reviewed by: jeff
thread and proc have been copied and zeroed from the old thread and
proc. Otherwise attempts to modify thread or process data in sched_fork()
could be undone.
- Don't copy td_{base,}_user_pri from the old thread to the new thread in
sched_fork_thread() in ULE. This is already done courtesy the bcopy()
of the thread copy region.
- Always initialize the real priority (td_priority) of new threads to the
new thread's base priority (td_base_pri) to avoid bogusly inheriting a
borrowed priority from the parent thread.
MFC after: 2 weeks
use sched_lend_user_prio to set lent priority.
- Improve pthread priority-inherit mutex, when a contender's priority is
lowered, repropagete priorities, this may cause mutex owner's priority
to be lowerd, in old code, mutex owner's priority is rise-only.
It is possible a lower priority thread lending priority to higher priority
thread, in old code, it is ignored, however the lending should always be
recorded, add field td_lend_user_pri to fix the problem, if a thread does
not have borrowed priority, its value is PRI_MAX.
MFC after: 1 week
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
