for vt. Restore syscons' rendering of background (bg) brightness as
foreground (fg) blinking and vice versa, and add rendering of blinking
as background brightness to vt.
Bright/saturated is conflated with light/white in the implementation
and in this description.
Bright colors were broken in all cases, but appeared to work in the
only case shown by "vidcontrol show". A boldness hack was applied
only in 1 layering-violation place (for some syscons sequences) where
it made some cases seem to work but was undone by clearing bold using
ANSI sequences, and more seriously was not undone when setting
ANSI/xterm dark colors so left them bright. Move this hack to drivers.
The boldness hack is only for fg brightness. Restore/add a similar hack
for bg brightness rendered as fg blinking and vice versa. This works
even better for vt, since vt changes the default text mode to give the
more useful bg brightness instead of fg blinking.
The brightness bit in colors was unnecessarily removed by the boldness
hack. In other cases, it was lost later by teken_256to8(). Use
teken_256to16() to not lose it. teken_256to8() was intended to be
used for bg colors to allow finer or bg-specific control for the more
difficult reduction to 8; however, since 16 bg colors actually work
on VGA except in syscons text mode and the conversion isn't subtle
enough to significantly in that mode, teken_256to8() is not used now.
There are still bugs, especially in vidcontrol, if bright/blinking
background colors are set.
Restore XOR logic for bold/bright fg in syscons (don't change OR
logic for vt). Remove broken ifdef on FG_UNDERLINE and its wrong
or missing bit and restore the correct hard-coded bit. FG_UNDERLINE
is only for mono mode which is not really supported.
Restore XOR logic for blinking/bright bg in syscons (in vt, add
OR logic and render as bright bg). Remove related broken ifdef
on BG_BLINKING and its missing bit and restore the correct
hard-coded bit. The same bit means blinking or bright bg depending
on the mode, and we want to ignore the difference everywhere.
Simplify conversions of attributes in syscons. Don't pretend to
support bold fonts. Don't support unusual encodings of brightness.
It is as good as possible to map 16 VGA colors to 16 xterm-16
colors. E.g., VGA brown -> xterm-16 Olive will be converted back
to VGA brown, so we don't need to convert to xterm-256 Brown. Teken
cons25 compatibility code already does the same, and duplicates some
small tables. This is mostly for the sc -> te direction. The other
direction uses teken_256to16() which is too generic.
in practice).
db_expr_t is a signed type, but right shifts are fudged to evaluate
them in an unsigned type, and the unsigned type was broken by hard-
coding it as 'unsigned', so casting to it lost the top bits on arches
with db_expr_t larger than u_int.
The unsigned type with the same size as db_expr_t is not declared;
assume that db_addr_t gives it. Fixing this properly is less important
than using the correct type for db_expr_t (originally always long for
C90, but always intmax_t since C99).
Rules are unlinked in shutdown_pf(), so we must call
pf_unload_vnet_purge(), which frees unlinked rules, after that, not
before.
Reviewed by: eri, bz
Differential Revision: https://reviews.freebsd.org/D10040
It is O(n) in the length of the haystack (big) string, and has special
cases for short needle (little) strings, of one to four bytes, to avoid
excessive overhead.
There are a small set of nearly trivial cases where the startup overhead
of the musl implementation makes it slightly slower -- for example, a 31
byte needle that matches the beginning of the haystack. It's faster for
non-trivial cases, and significantly so for inputs that trigger worst-
case behaviour of the previous implementation. As an example, in my
tests a 16K needle that matches the end of a 64K haystack is nearly
2000x faster with this implementation.
Reviewed by: bapt (earlier), ed (earlier)
Obtained from: musl (snapshot at commit c718f9fc)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2601
This adds support for matching against a core lookup table when performing
early boot core lookup, and includes the BCM4706/Northstar-specific
ChipCommon core ID in the set of supported ChipCommon cores.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D10033
Extend the Book-E pmap to support 64-bit operation. Much of this was taken from
Juniper's Junos FreeBSD port. It uses a 3-level page table (page directory
list -- PP2D, page directory, page table), but has gaps in the page directory
list where regions will repeat, due to the design of the PP2D hash (a 20-bit gap
between the two parts of the index). In practice this may not be a problem
given the expanded address space. However, an alternative to this would be to
use a 4-level page table, like Linux, and possibly reduce the available address
space; Linux appears to use a 46-bit address space. Alternatively, a cache of
page directory pointers could be used to keep the overall design as-is, but
remove the gaps in the address space.
This includes a new kernel config for 64-bit QorIQ SoCs, based on MPC85XX, with
the following notes:
* The DPAA driver has not yet been ported to 64-bit so is not included in the
kernel config.
* This has been tested on the AmigaOne X5000, using a MD_ROOT compiled in
(total size kernel+mdroot must be under 64MB).
* This can run both 32-bit and 64-bit processes, and has even been tested to run
a 32-bit init with 64-bit children.
Many thanks to stevek and marcel for getting Juniper's FreeBSD patches open
sourced to be used here, and to stevek for reviewing, and providing some
historical contexts on quirks of the code.
Reviewed by: stevek
Obtained from: Juniper (in part)
MFC after: 2 months
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D9433
By default bmake does not allow meta mode to work unless an OBJDIR is
present. It allows this if curdirok= is set with a value not starting
with [0NnFf], but usually it is "yes".
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
For instance, in the dtrace/dtrace module, building dtrace_asm.o wants
to build genassym.o first, but it doesn't build the missing ilinks
and if_*.h headers which are part of the OBJS_DEPEND_GUESS list
of dependencies to build if a .depend file is missing.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The objects that may be in the dependency graph may not match
${OBJS}. Ensure the ilink link is added as a dependency for
all of them when a .depend file is missing for that objfile.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
functions in the LinuxKPI. Add a usage atomic to the task_struct
structure to facilitate refcounting the task structure when returned
from get_pid_task(). The get_task_struct() and put_task_struct()
function is used to manage atomic refcounting. After this change the
task_struct should only be freed through put_task_struct().
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
a separator between host and port, and using strchr() to search for it.
Rewrite fetch_resolve() so it handles bracketed literals correctly, and
remove similar code elsewhere to avoid passing unbracketed literals to
fetch_resolve(). Remove #ifdef INET6 so we still parse IP literals
correctly even if we do not have the ability to connect to them.
While there, fix an off-by-one error which caused HTTP 400 errors to be
misinterpreted as redirects.
PR: 217723
MFC after: 1 week
Reported by: bapt, bz, cem, ngie
On the original i386, %dr[4-5] were unimplemented but not very clearly
reserved, so debuggers read them to print them. i386 was still doing
this.
On the original athlon64, %dr[4-5] are documented as reserved but are
aliased to %dr[6-7] unless CR4_DE is set, when accessing them traps.
On 2 of my systems, accessing %dr[4-5] trapped sometimes. On my Haswell
system, the apparent randomness was because the boot CPU starts with
CR4_DE set while all other CPUs start with CR4_DE clear. FreeBSD
doesn't support the data breakpoints enabled by CR4_DE and it never
changes this flag, so the flag remains different across CPUs and
the behaviour seemed inconsistent except while booting when the CPU
doesn't change.
The invalid accesses broke:
- read access for printing the registers in ddb "show watches" on CPUs
with CR4_DE set
- read accesses in fill_dbregs() on CPUs with CR4_DE set. This didn't
implement panic(3) since the user case always skipped %dr[4-5].
- write accesses in set_dbregs(). This also didn't affect userland.
When it didn't trap, the aliasing made it fragile.
Don't print the dummy (zero) values of %dr[4-5] in "show watches" for
i386 or amd64. Fix style bugs near this printing.
amd64 also has space in the dbregs struct for the reserved %dr[8-15]
and already didn't print the dummy values for these, and never accessed
any of the 10 reserved debug registers.
Remove cpufuncs for making the invalid accesses. Even amd64 had these.
It seems to be old code from the armv6 project branch that never had a
kernel config.
Reviewed by: mmel
Sponsored by: ABT Systems Lrd
Differential Revision: https://reviews.freebsd.org/D7166
nodes from the DTB by default. This will allow us to enumerate the CPUs
without hard coding the CPU count into code.
Reviewed by: br
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D9827
As ZFS can request up to SPA_MAXBLOCKSIZE memory block e.g. during zfs recv,
update the threshold at which we start agressive reclamation to use
SPA_MAXBLOCKSIZE (16M) instead of the lower zfs_max_recordsize which
defaults to 1M.
PR: 194513
Reviewed by: avg, mav
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D10012
be migrated to this and will allow the removal of this option.
Reviewed by: ian
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D9907
some associated helper functions in the LinuxKPI. Let the existing
linux_alloc_current() function allocate and initialize the new
structure and let linux_free_current() drop the refcount on the memory
mapping structure. When the mm_struct's refcount reaches zero, the
structure is freed.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Provides:
amount of compressed data
logical size of compressed data (how much it would have taken uncompressed)
compression ratio (logical size : total ARC size)
Overhead (space consumed for compression headers)
Example output:
ARC: 31G Total, 18G MFU, 9067M MRU, 2236K Anon, 615M Header, 2947M Other
25G Compressed, 54G Uncompressed, 1.76:1 Ratio, 2265M Overhead
Reviewed by: jpaetzel, smh, imp, jhb (previous version)
MFC after: 2 week
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9829
registers.
- Add slot type capability bits. These bits should allow recognizing
removable card slots, embedded cards and shared buses (shared bus
supposedly is always comprised of non-removable cards).
- Dump CAPABILITIES2, ADMA_ERR, HOST_CONTROL2 and ADMA_ADDRESS_LO
registers in sdhci_dumpregs().
- The drive type support flags in the CAPABILITIES2 register are for
drive types A,C,D, drive type B is the default setting (value 0) of
the drive strength field in the SDHCI_HOST_CONTROL2 register.
Obtained from: DragonFlyBSD (9e3c8f63, 455bd1b1)
the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)
Of these "partitions", only the enhanced user data area one actually
slices the user data area partition and, thus, gets handled with the
help of geom_flashmap(4). The other types of partitions have address
space independent from the default partition and need to be switched
to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".
The second kind of these "partitions" doesn't fit that well into the
design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
of these "partitions" up as disk(9)'s (except for the RPMB partition
as it didn't seem to make much sense to be able to put a file-system
there and may require authentication; therefore, RPMB partitions are
solely accessible via the newly added IOCTL interface currently; see
also below). This approach for one resulted in cleaner code. Second,
it retains the notion of mmcsd(4) children corresponding to a single
physical device each. With the addition of some layering violations,
it also would have been possible for mmc(4) to add separate mmcsd(4)
instances with one disk each for all of these "partitions", however.
Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
issuing CMD6, which has been factored out into mmc_subr.c.
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
- Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications. However, quite some work is
left to be done in this regard; all other R1B-type commands done by
the MMC layer also should be followed by a SEND_STATUS (CMD13), the
erase timeout calculations/handling as documented in specifications
are entirely ignored so far, the MMC layer doesn't provide timeouts
applicable up to the bridge drivers and at least sdhci(4) currently
is hardcoding 1 s as timeout for all command types unconditionally.
Let alone already available return codes often not being checked in
the MMC layer ...
- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter will be added to ports as sysutils/mmc-utils in
a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
partitioning eMMC devices (tested working).
- For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.
- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.
- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
controllers as such in order to match the PCI one.
Additionally, in the entry for the 80860F14 SDXC controller remove
the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
OKed by: imp
Submitted by: ian (mmc_switch_status() implementation)
We should be more verbose about read errors from biosdisk, except filter
out the floppy controller errors, which apparently are resulting from
read attempt from device without the media present.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10032
D8376 extended softfloat/hardfloat support, but used a macro that never
actually gets set except in libc and msun's Makefile.inc. So libc and libm
got built correctly, but any program including fenv.h itself assumed it was
on a hardfloat systen and emitted inline fpu instructions for
fedisableexcept() and friends.
Using __mips_soft_float makes everything work in all cases, since it's a
compiler-internal macro that is always set correctly for the target
PR: 217845
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
Fix the regex used to find vmprot table entries and add the missing include.
This fixes kdumps output of PFLT arguments which would previously look like:
5202 101546 ktrace PFLT 0x5ae000 0x2<><invalid>2
They now display correctly:
5202 101546 ktrace PFLT 0x5ac000 0x2<VM_PROT_WRITE>
MFC after: 1 week
pairwise to support the FreeBSD way of pushing and popping the page
fault flags. Ensure this by requiring every occurrence of pagefault
disable function call to have a corresponding pagefault enable call.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
codes. This will be used to fix bright colors.
Improve teken_256to8(). Use a lookup table instead of calculations. The
calculations were inaccurate since they used indexes into the xterm-256
6x6x6 color map instead of actual xterm colors. Also, change the threshold
for converting to a primary color: require the primary's component to be
2 or more higher instead of just higher. This affects about 1/5 of the
table entries and gives uniformly distributed colors in the 6x6x6 submap
except for greys (35 entries each for red, green, blue, cyan, brown and
magenta, instead of approx. only 15 each for the mixed colors). Even
more mixed colors would be better for matching colors, but uniform
distribution is best for preserving contrast.
For teken_256to16(), bright colors are just the ones with luminosity >=
60%. These are actually light colors (more white instead of more
saturation), while xterm bright colors except for white itself are
actually saturated with no white, so have luminosity only 50%.
These functions are layering violations. teken cannot do correct
conversions since it shouldn't know the color maps of anything except
xterm. Translating through xterm-16 colors loses information. This
gives bugs like xterm-256 near-brown -> xterm-16 red -> VGA red.
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
As we provide the disk size verification and correction via disk_ioctl
and disk state provided by disk_open(), we can not share the partition
state in disk_devdesc structure. Also the sharing does make a lot of sense
with ufs, as only one partition is open at any given time, but zfs pools
do keep the disk devices open.
To make sure we do get the correct information about the open device,
just remove the cache.
Reviewed by: allanjude, smh
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9757
