Commit Graph

19 Commits

Author SHA1 Message Date
Andrew Thompson
787096051b These days P2P means peer-2-peer (also well known from serveral filesharing
protocols) while PointToPoint has been PtP links. Change the variables
accordingly while the code is still fresh and undocumented.

Requested by:	bz
2006-12-11 23:46:40 +00:00
Shteryana Shopova
daacddcac8 Add two new flags to if_bridge(4) indicating whether the edge flag
of the bridge port and path cost have been administratively set or
calculated automatically by RSTP.

Make sure to transition from non-edge to edge when the port goes down
and the edge flag was manually set before.
This is needed to comply with the condition
	((!portEnabled && AdminEdge) || ....)
in the Bridge Detection State Machine (IEE802.1D-2004, p. 171).

Reviewed by:	thompsa
Approved by:	bz (mentor)
2006-12-04 14:45:02 +00:00
Andrew Thompson
6c32e05ca3 Sync with the OpenBSD port of RSTP
- use flags rather than sperate ioctls for edge, p2p
 - implement p2p and autop2p flags
 - define large pathcost constant as ULL
 - show bridgeid and rootid in ifconfig

Obtained from:	Reyk Floeter <reyk@openbsd.org>
2006-11-27 00:35:40 +00:00
Andrew Thompson
3df7fad0cf Add a new address cache type called sticky. On an interface marked sticky any
address learned by the bridge is made permanent, the address will not age out
and most importantly will not migrate to another interface.

This can be used to stop mac address poisoning or clients roaming in much the
same way as static entries without the hassle of preloading the table.
2006-11-09 06:32:38 +00:00
Andrew Thompson
3fab76690c Bring in support for the Rapid Spanning Tree Protocol (802.1w).
RSTP provides faster spanning tree convergence, the protocol will exchange
information with neighboring switches to quickly transition to forwarding
without creating loops. The code will default to RSTP mode but will downgrade
any port connected to a legacy STP network so is fully backward compatible.

Reviewed by:	syrinx
Tested by:	syrinx
2006-11-01 09:07:47 +00:00
Andrew Thompson
51383c37cd Add some statistics that are needed to support RFC4188 as part of the SoC2006
work on a bridge monitoring module for BSNMP.

Submitted by:	shteryana (SoC 2006)
2006-07-31 20:24:46 +00:00
Andrew Thompson
9674cf0e27 Remove the dependency of bridgestp.h on if_bridgevar.h by moving a couple of
private structures to if_bridge.c.
2006-07-27 21:01:48 +00:00
Andrew Thompson
96e47153ea /tmp/cvsuusTrc 2006-07-26 10:43:02 +00:00
Andrew Thompson
e1457c3eb1 If we miss the LINK_UP event from the network interface then the bridge port
will remain in the disabled state until another link event happens in the
future (if at all). Add a timer to periodically check the interface state and
recover.

Reported by:	Nik Lam <freebsdnik j2d.lam.net.au>
MFC after:	3 days
2006-03-06 02:28:41 +00:00
Andrew Thompson
7c2fb83a0b Add code that clears certain capabilities from the member interface, these are
restored when its removed from the bridge.

At the moment we only clear IFCAP_TXCSUM. Since a locally generated packet on
the bridge may be sent out any one or more interfaces it cant be assumed that
every card does hardware csums. Most bridges don't generate a lot of traffic
themselves so turning off offloading won't hurt, bridged packets are
unaffected.

Tested by:	Bruce Walker (bmw borderware.com)
MFC after:	5 days
2006-01-14 03:51:31 +00:00
Andrew Thompson
ec311647fb Minor whitespace cleanup. 2006-01-02 09:50:34 +00:00
Andrew Thompson
e0a87e8acd Change from a callback in if_ethersubr to using EVENTHANDLER in order to detach
span ports when they disappear. The span port does not have a pointer to the
softc so revert r1.31 and bring back the softc linked-list.

MFC after:	2 weeks
2005-12-17 06:33:51 +00:00
Andrew Thompson
91f6764e93 Add support for creating span ports so that one can snoop bridged traffic
from another interface/machine/network.

Obtained from:	OpenBSD
MFC after:	2 weeks
2005-12-14 02:52:13 +00:00
Andrew Thompson
4e7e0183e1 Move the cloned interface list management in to if_clone. For some drivers the
softc lists and associated mutex are now unused so these have been removed.

Calling if_clone_detach() will now destroy all the cloned interfaces for the
driver and in most cases is all thats needed to unload.

Idea by:	brooks
Reviewed by:	brooks
2005-11-08 20:08:34 +00:00
Andrew Thompson
fd6238a659 Further clean up the bridge hooks in if_ethersubr.c and ng_ether.c
- move the function pointer definitions to if_bridgevar.h
- move most of the logic to the new BRIDGE_INPUT and BRIDGE_OUTPUT macros
- remove unneeded functions from if_bridgevar.h and sort a little.
2005-10-14 02:38:47 +00:00
Andrew Thompson
ea32e73208 - Previously when broadcasting to N number of interfaces we would run pfil
hooks for each outgoing interface but also run pfil hooks _N times_ on the
  bridge interface. This is changed so pfil hooks are run once for the bridge
  interface (bridge0) and then only on the outgoing interfaces in the broadcast
  loop.

- Simplify bridge_enqueue() by moving bridge_pfil() to the callers.

- Check (inet6_pfil_hook.ph_busy_count >= 0), it may be possible to have a
  packet filter hooked for only ipv6 but we were only checking if ipv4 hooks
  were busy.

- Minor optimisation for null mbuf check after bridge_pfil(), move it into the
  if-block as it couldnt possibly be null outside.

Prodded by:	mlaier
Approved by:	re (scottl), mlaier (mentor)
2005-07-06 01:24:45 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Andrew Thompson
c8b0129238 Add dummynet(4) support to if_bridge, this code is largely based on bridge.c.
This is the final piece to match bridge.c in functionality, we can now be a
drop-in replacement.

Approved by:	mlaier (mentor)
2005-06-10 01:25:22 +00:00
Andrew Thompson
31997bf223 Add if_bridge, which provides more advanced Ethernet bridging and 802.1d
spanning tree support.

Based on Jason Wright's bridge driver from OpenBSD, and modified by Jason R.
Thorpe in NetBSD.

Reviewed by:	mlaier, bms, green
Silence from:	-net
Approved by:	mlaier (mentor)
Obtained from:	NetBSD
2005-06-05 02:59:26 +00:00