By default, axgbe driver does a receiver reset after predefined number
of retries for the link to come up. However, this receiver reset
doesn't always suffice, due to an hardware issue.
In that case, as a workaround, a complete phy reset is necessary.
This patch introduces a sysctl that can be set to 1 to let the driver
reset the phy completely, rather than just doing receiver reset.
The workaround will be removed once the issue is fixed by means
of firmware update.
This patch also fixes the handling of the direct attach cables
properly.
Submitted by: rajesh1.kumar_amd.com
Differential Revision: https://reviews.freebsd.org/D28266
Handle the case of a tagged command arriving when there's an untagged
one still outstanding gracefully instead of panicing.
While at it:
- Replace fancy arithmetics with a simple assignment as busy_itl can
only ever be either 0 or 1.
- Fix a comment typo in sym_free_ccb().
- In ___dma_getp(), remove dead code. [1]
- In sym_sir_bad_scsi_status(), add missing FALLTHROUGH. [2]
While at it:
- For getbaddrcb(), remove __unused from the nseg argument as it's in
fact used when compiling with INVARIANTS.
- In sym_int_sir(), ensure in all branches that cp is not NULL before
using it.
Reported by: Coverity
CID: 1008861 [1], 114996 [2]
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
For hardware offload solicited data may potentially be handled more
efficiently than unsolicited due to direct data placement. Or there
can be some unsolicited write buffering limitations. It may create
situations where FirstBurstLength limit is really useful.
Software driver though has no those factors, having to do memcopy()
any way and having no so hard limit on the temporary storage. Same
time more active use of unsolicited transfers allows to avoid some
of Ready To Transfer (R2T) PDU round-trip times and processing.
This change effectively doubles from 64KB to 128KB the maximum size
of write command that can be transferred within one link RTT. Tests
of (64KB, 128KB] QD1 writes mixed with simultaneous QD8 reads over
the same connection, increasing RTT, shows almost double write speed
and half latency, while we should be able to afford few megabytes of
RAM for additional buffering on a target these days.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This was blindly moved in r360722 but the variable being printed is not
yet initialised. It's of little use and can easily be added back in the
right place if needed by someone debugging, so just delete it.
Reported by: bryanv
Rather than have every device register itself for both virtio_pci and
virtio_mmio, provide a VIRTIO_DRIVER_MODULE wrapper to declare both,
merge VIRTIO_SIMPLE_PNPTABLE with VIRTIO_SIMPLE_PNPINFO and make the
latter register for both buses. This also has the benefit of abstracting
away the available transports and their names.
Reviewed by: bryanv
Differential Revision: https://reviews.freebsd.org/D28073
We must check MagicValue not just Version before anything else, and then
we must check DeviceID and immediately abort if zero (and this must not
be an error).
Do all this when probing rather than at the start of attaching as that's
where this belongs, and provides a clear boundary between the device
detection and device initialisation parts of the specified driver
initialisation process. This also means we don't create empty device
instances for placeholder devices, reducing clutter on systems that
pre-allocate a large number, such as QEMU's AArch64 virt machine (which
provides 32).
Reviewed by: bryanv
Differential Revision: https://reviews.freebsd.org/D28070
Define the maximum numbers of segments to allow for non-page alignment
at the beginning and end of a maxphys size transfer. Also set
ccb_pathinq.maxio consistent with maxphys.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28043
on success instead of 0 to match Linux.
Imprivata binary depends on this.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
Differential revision: https://reviews.freebsd.org/D28218
Many I2C "compatibility" mouse devices found on touchpads continue to
return last report data in sampling mode after touch has been ended.
That results in cursor drift. Filter out such a reports with comparing
content of current report with content of previous one.
Reported by: many
Tested by: omatsuda, gllb (github.com)
Obtained from: sysutils/iichid
There is a report that reading of surface/button switch feature report
causes SYN1B7D touchpad malfunction. As specs does not require it to
be readable assume that report usages have default value on attach and
last written value during operation. Do not apply default usage values
on attachment and resume.
While here fix manpage typos and add avg@ to copyright header.
Reported by: Jakob Alvermark <jakob_AT_alvermark_DOT_net>
Reviewed by: avg
Differential revision: https://reviews.freebsd.org/D28196
This patch is a quick hack to change the internal Ethertype used
within the chip. All frames with this type are dropped silently.
This patch allows you to overwrite the factory default 0x88a8, which
is used by IEEE 802.1ad VLAN stacking.
Reviewed by: kp, philip, brueffer
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24179
Try to standardize how drivers negotiate feature and the
function names
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27930
- Add and fix a few error path counters
- Improve sysctl descriptions
- Use flags consistently to determine IPv4 vs IPv6
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27926
Prior to V1, the driver would enable interrupts and then notify the
host that DRIVER_OK. Since for V1, DRIVER_OK needs to be set before
notifying the virtqueues, there may be items in the queues waiting
to be processed by the time interrupts are enabled.
This fixes a bug where the Rx queue would appear stuck, only being
usable after an interface down/up cycle.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27922
For multiqueue, we may use fewer than the provided maximum number of
queues. Try to limit allocations of the unused queues: no interrupts,
no indirect descriptors, and no taskqueues.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27921
Verify the max_virtqueue_pairs is within the range allowed by
the spec.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27920
This useful when running on hosts that support checksum offloading
but not the GUEST_TSO (LRO) feature. Or potentially, some GRO-like
support when doing forwarding.
Only enable SW LRO when the host LRO is not available since both
tends to be harmful, and difficult to enable/disable selectively
with only a single IFCAP_LRO flag.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27919
This allows the Rx checksum and LRO to be modified without a full
reinit of the device.
Remove IFCAP_RXCSUM_IPV6 from the interface capabilities since in
VirtIO Rx checksums are just enabled or disabled for all protocols.
Properly update IFCAP_LRO if LRO is becomes disabled when Rx
checksums are disabled.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27916
In modern VirtIO, the virtqueues cannot be notified before setting
DRIVER_OK status.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27932
Defer the ether_ifattach until the interface capabilities
are configured
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27913
This improves spec compliance because the driver is not suppose
to notify the device prior to setting the DRIVER_OK status, which
could happen with the VIRTIO_NET_F_CTRL_MAC_ADDR.
The VIRTIO_NET_F_MAC feature should always be negotiated so would
be a rare situation.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27910
This may have been required in an early, early, early version of the
specification but I cannot find any reference to it, and a promiscuous
default seems very odd so remove this code.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27909
This features lets the guest driver know the speed and duplex of
the "link". Instead of trying to support many media types based
on the possible/likely speeds/duplexes, only use the speed to
set the interface baudrate.
Cleanup ifmedia code to match other drivers.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27908
This feature lets the guest driver know the maximum MTU size
supported by the host device. If set, use this to limit the
acceptable MTUs, and improve how the receive mbuf cluster size
then is selected.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27907
- Fix the NEEDS_CSUM and DATA_VALID checksum flags. The NEEDS_CSUM
checksum is incomplete (partial) so offer a fallback for the driver
to calculate the checksum. Simplify DATA_VALID because we know
the host has validated the checksum.
- Default 4K mbuf clusters for mergeable buffers. May need to
scale this down to 2K clusters in certain configurations such
many queue pairs, big queues (like 4096 in GCP), and low memory.
- Use the MTU when calculated the receive mbuf cluster size
when not doing TSO/LRO. This will need more adjustment once
the MTU feature is supported.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27906
Very basic support to get packets flowing on modern QEMU but still
several conformance issues remain that will be addressed in later
commits.
First of many passes at cleaning up various accumulated cruft
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27904
Rework the header file changes from 2cc8a52 to use our
canonical upstream, Linux.
geom_disk already checks DISKFLAG_CANDELETE for BIO_DELETE
so remove an unnecessary check.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27902
