that had the IPv6 fragmentation header:
o Neighbor Solicitation
o Neighbor Advertisement
o Router Solicitation
o Router Advertisement
o Redirect
Introduce M_FRAGMENTED mbuf flag, and set it after IPv6 fragment reassembly
is completed. Then check the presence of this flag in correspondig ND6
handling routines.
PR: 224247
MFC after: 2 weeks
- Fix reference of uninitialized error value in bhndb_generic_resume() if
the dynamic window count is 0.
- Fix incorrect bhnd_pmu(4) UPTME_MASK and PLL0_PC2_WILD_INT_MASK
constants.
- Variable definitions referenced by our generated SPROM layouts will never
be NULL, but add explicit asserts to make that clear.
- Add missing variable initialization in bhnd_nvram_sprom_ident().
- Fix leak of driver array in bhnd_erom_probe_driver_classes().
- Fix zero-length memset() in bhndb_pci_eio_init().
- Fix an off-by-one error and potential invalid OOBSEL bit shift operation
in bcma_dinfo_init_intrs().
- Remove dead code in siba_suspend_hw().
- Fix duplicate call to bhnd_pmu_enable_regulator() in both the enable and
disable code paths of bhnd_compat_cc_pmu_set_ldoparef().
Reported by: Coverity
CIDs: 1355194, 1362020, 1362022, 1373114, 1366563, 1373115,
1381569, 1381579, 1383555, 1383566, 1383571
Sponsored by: The FreeBSD Foundation
Currently Facility Unavailable is absent and once an application
tries to use or access a register from a feature disabled in the
CPU it causes a kernel panic.
A simple test-case is:
int main() { asm volatile ("tbegin.;"); }
which will use TM (Hardware Transactional Memory) feature which
is not supported by the kernel and so will trigger the following
kernel panic:
----
fatal user trap:
exception = 0xf60 (unknown)
srr0 = 0x10000890
srr1 = 0x800000000000f032
lr = 0x100004e4
curthread = 0x5f93000
pid = 1021, comm = htm
panic: unknown trap
cpuid = 40
KDB: stack backtrace:
Uptime: 3m18s
Dumping 10 MB (3 chunks)
chunk 0: 11MB (2648 pages) ... ok
chunk 1: 1MB (24 pages) ... ok
chunk 2: 1MB (2 pages)panic: IOMMU mapping error: -4
cpuid = 40
Uptime: 3m18s
----
Since Hardware Transactional Memory is not yet supported by FreeBSD, treat
this as an illegal instruction.
PR: 224350
Submitted by: Gustavo Romero <gromero_AT_ibm_DOT_com>
MFC after: 2 weeks
memory:
Load the kernel eflags less magically, as in locore. The magic increased
when I removed eflags from the pcb in r305899.
Remove a jump to low memory that became garbage when the i386 version was
mostly replaced by the amd64 version in r235622.
The amd64 version is very similar. It still loads the flags magically,
but is not missing comments about using the special page table.
Reviewed by: kib
If a route is modified in a way that changes the route's source
address (i.e. the address used to access the gateway), then a
reference on the ifaddr representing the old source address will
be leaked if the address type does not have an ifa_rtrequest
method defined. Plug the leak by releasing the reference in
all cases.
Differential Revision: https://reviews.freebsd.org/D13417
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: Dell
Without the identifier in the list booting FreeBSD results in printing the
following (from a PowerKVM boot):
cpu0: Unknown PowerPC CPU revision 0x1201, 2550.00 MHz
For now, add the same feature list as POWER8. As new capabilities are added to
support POWER9 specific features, they will be added to this.
PR: 224344
Submitted by: Breno Leitao <breno_DOT_leitao_AT_gmail_DOT_com>
dvp->v_mount after dvp is unlocked.
The vnode might be reclaimed after unlock, so v_mount becomes NULL.
Cache the struct mount pointer before the unlock, the struct is
type-stable.
Note that devfs_allocv() reads mp->mnt_data but does not operate on it
further when dirent is doomed. The unmount cannot proceed until all
dirents are reclaimed.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Add the BCM4322X D11 core revision and missing BCM43224 PCI device ID to
our device tables.
- Disable the DMA engine parity check (rather than adding parity support
to the to-be-replaced bwn(4) DMA implementation).
Currently, N-PHY support in bwn(4) is GPL licensed, and is not included by
default. Until this is replaced with Broadcom's ISC-licensed N-PHY
implementation, bwn(4) must be rebuilt to enable N-PHY support.
To build bwn(4) with N-PHY support, add the following lines to your kernel
configuration file and rebuild the kernel (and modules):
options BWN_GPL_PHY
To test bwn(4) with a BCM43224/BCM43225 device, install the firmware from
the net/bwn-firmware-kmod port, and place the following lines in
loader.conf(5):
hw.bwn_pci.preferred="1"
if_bwn_pci_load="YES
bwn_v4_ucode_load="YES"
bwn_v4_n_ucode_load="YES"
bwn_v4_lp_ucode_load="YES"
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Official Linux dts's put the individual portals under a simple-bus, rather
than under a '*-portals' grouping. This adds a hack to permit that, which
gets us closer to using stock device trees for DPAA-based devices.
- The window target must always be updated when stealing a register window.
- Fix missing initialization of bhndb(4) region alloc_flags when
registering statically mapped port regions (caught by scan-build).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
g_mirror_event_send() acquires the I/O queue lock to deliver a wakeup
to the worker thread, and this is done after enqueuing the event.
So it's sufficient to check the event queue before atomically releasing
the queue lock and going to sleep.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Otherwise a gmirror that has received a BIO_DELETE request will never be
marked clean (unless sc_writes overflows).
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Decode on Book-E:
* ESR (Exception Syndrome Register)
* MCSR (Machine Check Status Register)
On AIM:
* MSSSR (Memory Subsystem Status Register)
Makes it easier to tell at a glance the type of trap and machine check
conditions now.
Previously, the counter was only incremented when m_append() failed. Since
the function can also fail on m_dup() now, increment the counter there as
well.
Sponsored by: Limelight Networks
The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
Upstream dts for allwinner will require a syscon driver, since the emac node
coming in 4.15 will be using xref to /soc/syscon for configuring the emac
clock. Add a generic syscon driver to attach to /soc/syscon for use by
if_awg, providing basic read/write functionality to consumers.
syscon driver will also be used by arm64 at least for A64+H5 emac/if_awg.
Written by: mmel
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13295
The laundry thread keeps track of the number of inactive queue scans
performed by the page daemon, and was previously using the v_pdwakeups
counter to count them. However, in some cases the inactive queue may
be scanned multiple times after a single wakeup, so it's more accurate
to use a dedicated counter.
Reviewed by: alc, kib (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13422
Logically, extend r286288 to cover all threads, by default.
The world has largely moved on from i386. Most FreeBSD users and developers
test on amd64 hardware. For better or worse, we have written a non-trivial
amount of kernel code that relies on stacks larger than 8 kB, and it "just
works" on amd64, so there has been little incentive to shrink it.
amd64 had its KSTACK_PAGES bumped to 4 back in Peter's initial AMD64 commit,
r114349, in 2003. Since that time, i386 has limped along on a stack half
the size. We've even observed the stack overflows years ago, but neglected
to fix the issue; see the 20121223 and 20150728 entries in UPDATING.
If anyone is concerned with this change, I suggest they configure their
AMD64 kernels with KSTACK_PAGES 2 and fix the fallout there first. Eugene
has identified a list of high stack usage functions in the first PR below.
PR: 219476, 224218
Reported by: eugen@, Shreesh Holla <hshreesh AT yahoo.com>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
during startup. When a brand new chip leaves the factory, it is in a
special power-saving mode that disables most functions on the chip to
save battery power. The chip is stuck in this mode until the first write
to the time registers, which automatically clears the special power-saving
mode and starts the oscillator.
Also, the day-of-week register in this chip counts 1-7, not 0-6, so write
the values accordingly.
These changes are based on the patch submitted by Brian Scott, but I
elimated warnings since this condition is expected, and added some comments,
and so in general blame me for any mistakes.
PR: 223642
pmap_track_page() only works with physical memory pages, which have a
constant vm_page_t address. Microoptimize pmap_track_page() to perform one
less operation under the lock.
This commit defines some macros used by the pNFS server code.
They will not be used until the main pNFS server code merge occurs,
which will probably be in April 2018.
r292392 modified the active queue scan to weigh clean pages differently
from dirty pages when attempting to meet the inactive queue target. When
r306706 was merged into the PQ_LAUNDRY branch, this mechanism was
broken. Fix it by scalaing the correct page shortage variable.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13423
FFS performs asynchronous inode initialization, using a barrier write
to ensure that the inode block is written before the corresponding
cylinder group header update. Some GEOMs do not appear to handle
BIO_ORDERED correctly, meaning that the barrier write may not work as
intended. The sysctl allows one to work around this problem at the
cost of expensive file creation on new filesystems. The default
behaviour is unchanged.
Reviewed by: kib, mckusick
MFC after: 1 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13428
Fix memory leak where mbuf chain wasn't free()d if iflib_ether_pad()
has a failure in m_dup().
Reported by: "Ryan Stone" <rysto32@gmail.com>
Sponsored by: Limelight Networks
If ethernet padding is enabled, and a read-only mbuf is passed,
it would modify the mbuf using m_append(). Instead, call m_dup() and
append to the new packet.
Reported by: Pyun YongHyeon
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13414
