RAD_MICROSOFT_MS_CHAP_ERROR and RAD_MICROSOFT_MS_CHAP2_SUCCESS
messages, and remove the hack in chap.c to ignore that ident field
on the client side.
This anomoly was hacked around during development, and I forgot to
go back and fix it properly.
Spotted by: Sergey Korolew <ds@rt.balakovo.ru>
RAD_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY
RAD_MICROSOFT_MS_MPPE_ENCRYPTION_TYPES
RAD_MICROSOFT_MS_MPPE_RECV_KEY
RAD_MICROSOFT_MS_MPPE_SEND_KEY
These attributes may be supplied by a RADIUS server when MSCHAPv2 is
used to authenticate.
It *should* now be possible to build ppp with -DNODES and still support
CHAP/MSCHAP/MSCHAPv2/MPPE via a RADIUS server, but the code isn't yet
smart enough to do that (building with -DNODES just looses these
facilities).
Sponsored by: Monzoon
sufficient.
In fact, using both breaks the radiator RADIUS daemon when used with
a db as it maps both attributes to the same field value and then
fails the insert.
I decided to remove RAD_NAS_IP_ADDRESS on the basis that rfc2138 says:
An Access-Request MUST contain a User-Name attribute. It SHOULD
contain either a NAS-IP-Address attribute or NAS-Identifier
attribute (or both, although that is not recommended). It MUST
despite the fact that this not recommended bit was removed from the
updated rfc.
configured).
Handle internal failures in radius_Authenticate() correctly.
Bump the ppp version number.
This doesn't yet work with MPPE. More will follow.
Sponsored by: Mozoon
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.
When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.
When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).
This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.
Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>
just send PROTO_IP packets when we've got only one link up in multi-link
mode.
Problem noted by: Adrian Close <adrian@fernhilltec.com.au>
MFC after: 1 week
instead of u_char *.
The changes are cosmetic except:
RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd
