- Add __alignof() for non-GCC and GCC < 2.95.
- Simply implement the C1X keywords on top of the existing __macros.
- Add struct __hack to _Static_assert to require consumers to add a
semicolon.
- Add an extra underscore to __assert_ to allow it to be combined with
locally defined versions of CTASSERT in the tree.
- Add proper casts to __offsetof() to make it work for cases where
sizeof(size_t) != sizeof(uintptr_t).
- Globally replace size_t and uintptr_t by __size_t and __uintptr_t.
This removes the dependency on <sys/types.h> / <stdint.h>. Practically
any header file ends up including <machines/_types.h> somehow.
- Change argument names of macros to match with the rest of the file.
MFC after: 3 months
- Device configuration via plain text config file. Also able to operate
when not attached to the chip as the master driver.
- Generic "work request" queue that serves as the base for both ctrl and
ofld tx queues.
- Generic interrupt handler routine that can process any event on any
kind of ingress queue (via a dispatch table).
- A couple of new driver ioctls. cxgbetool can now install a firmware
to the card ("loadfw" command) and can read the card's memory
("memdump" and "tcb" commands).
- Lots of assorted information within dev.t4nex.X.misc.* This is
primarily for debugging and won't show up in sysctl -a.
- Code to manage the L2 tables on the chip.
- Updates to cxgbe(4) man page to go with the tunables that have changed.
- Updates to the shared code in common/
- Updates to the driver-firmware interface (now at fw 1.4.16.0)
MFC after: 1 month
The feature has been standard for a while in UFS as a means to reduce
fragmentation, therefore maintaining consistent performance with
filesystem aging. This is also very similar to what ext4 calls
"delayed allocation".
In his 2010 GSoC, Zheng Liu ported and benchmarked the missing
FANCY_REALLOC code to find more consistent performance improvements than
with the preallocation approach.
PR: 159233
Author: Zheng Liu <gnehzuil AT SPAMFREE gmail DOT com>
Sponsored by: Google Inc.
Approved by: jhb (mentor)
MFC after: 2 weeks
Since mpboot.s enables processor support for PG_PS before enabling
paging, there is no reason that the identity must use 4 KB page mappings.
Discussed with: jhb
- Write Buffers have to be drained after write to Page Table even if caches
are in write-through mode.
- Make sure to sync PTE in pmap_zero_page_generic().
Submitted by: Michal Mazur
Reviewed by: cognet
Obtained from: Semihalf
MFC after: 1 month
the full length from offset is being flushed. Note that for now VOP_FSYNC
does not support offset and length parameters so we still do the same full
VOP_FSYNC. This issue was reported at FreeNAS support site as FreeNAS
ticket #1096.
Submitted by: "ceckerle" <ce.freenas eckerle net>
Prodded by: gcooper
Reviewed by: rmacklem
MFC after: 2 weeks
* Add in a default GPIO section for AR91XX_BASE.hints, which doesn't
define the GPIO function masks or any GPIO pines.
* Add in the GPIO line definitions for LEDs and GPIO pins for the
TP-WR1043nd.
I've verified the LEDs work fine using gpioset.
config and function mask setup.
* "gpiomask" now specifies which GPIO pins to enable, for devices to bind to.
* "function_set" allows bits in the function register to be set at GPIO setup.
* "function_clear" allows bits in the function register to be cleared at
GPIO setup.
The function_set/function_clear bits allow for individual GPIO pins to either
drive a GPIO line or an alternate function - eg USB, JTAG, etc. This allows
for things like CS1/CS2 be enabled for those boards w/ >1 SPI device connected,
or disabling JTAG for the AR7240 (which is apparently needed ..)
I've verified this on the AR71xx.
attached this way.
The AR5212 based NICs have a variety of RF frontends, so there's a linker set
which the AR5212 attach routine calls. The same framework is used for the
AR5416 and later but as there's a fixed RF frontend for each 11n NIC, it
is just directly attached.
However in the case of compiling a cut down HAL (eg _just_ AR9130 WMAC support),
the linker set ends up being empty and this causes the compile to fail.
So this is just a workaround for that - it means those users who wish an 11n
only HAL can compile the 11n chipsets and RF frontend they need, and just
"ath_ar5212" for the AR5212/AR5416 common code, and it'll just work.
Sponsored by: Hobnob, Inc.
* Call it before sending probe responses, so the ACL code has the
chance to reject sending them.
* Pass the whole frame to the ACL code now, rather than just the
destination MAC - that way the ACL module can look at the frame
contents to determine what the response should be.
This is part of some uncommitted work to support band steering.
Sponsored by: Hobnob, Inc.
The reverse direction of a pipe is lazily allocated on the first write in
that direction (because pipes are usually used in one direction only). A
special case is needed to ensure the pipe appears writable before the first
write because there are 0 bytes of pending data in 0 bytes of buffer space
at that point, leaving 0 bytes of data that can be written with the normal
code.
Note that the first write returns [ENOMEM] if kern.ipc.maxpipekva is
exceeded and does not block or return [EAGAIN], so selecting true for write
is correct even in that case.
PR: kern/93685
Submitted by: gianni
MFC after: 2 weeks
objects created by shm_open(2) into the kernel's address space. This
provides a convenient way for creating shared memory buffers between
userland and the kernel without requiring custom character devices.
This removes the obfuscations mentioned in ext2_readwrite and
places the clustering funtion in a location similar to other
UFS-based implementations.
No performance or functional changeses are expected from
this move.
PR: kern/159232
Suggested by: bde
Approved by: jhb (mentor)
MFC after: 2 weeks
sintrnames and sintrcnt are initialized with non-zero values, which were
discarded by the .bss directive, so consumers like "vmstat -i" were not
getting correct data.
Submitted by: Lukasz Plachno
Obtained from: Semihalf
MFC after: 1 month
- Add _Alignas(). Unfortunately this macro is only partially functional.
The C1X standard will allow both an integer and a type name to be
passed to this macro, while this macro only allows an integer. To be
portable, one must use _Alignas(_Alignof(double)) to use type names.
- Don't do _Static_assert() when __COUNTER__ is not supported. We'd
better keep this implementation robust and allow it to be used in
header files, without mysteriously breaking older compilers.
will time out and close opened /dev/dspX.Y device(s), if
any. This is a workaround because we cannot unregister PCM
devices while the audio character device is in use.
Add a missing inclusion guard.
MFC after: 1 weeks
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.
This patch also fixes some build issues in avr32dci.c
MFC after: 2 weeks
- _Alignof(), which returns the aligment of a certain type.
- _Static_assert(), which can be used to check compile-time assertions.
- _Thread_local, which uses TLS on a variable.
MFC after: 3 months
Reviewed by: mdf
messages.
o Add check for actually resolved speed in miibus_statchg callback
instead of blindly reprogramming BCE_EMAC_MODE register. The
callback may be called multiple times(e.g. link UP, link
transition, auto-negotiate complete etc) while auto-negotiation
is in progress. All unresolved link state changes are ignored
now and setting BCE_EMAC_MODE after link establishment is done
once.
o bce(4) is careful enough not to drive MII_TICK if driver got a
valid link. To detect lost link, bce(4) relied on link state
change interrupt and if driver see the interrupt, it forced to
drive MII_TICK by calling bce_tick() in interrupt handler.
Because bce(4) generates multiple link state change interrupts
while auto-negotiation is in progress, bce_tick() would be
called multiple times and this resulted in generating multiple
link UP/DOWN messages.
With this change, bce_tick() is not called in interrupt handler
anymore such that miibus_statchg callback handles link state
changes with consistent manner.
Reviewed by: davidch
