Commit Graph

2129 Commits

Author SHA1 Message Date
Paul Richards
9b55e84fec Re-organise lnc driver in preparation for newbusifying it. 2000-05-16 02:08:04 +00:00
Paul Richards
5baeead2f1 Fix location of lnc pci code. 2000-05-14 19:10:46 +00:00
Paul Richards
ca9f504536 Build lnc driver from /sys/dev from now on. 2000-05-14 18:24:41 +00:00
Doug Rabson
5c885c3f83 Port ppc driver to alpha.
Submitted by: Andrew M. Miklic <miklic@ibm.net>
2000-05-14 13:47:57 +00:00
Peter Wemm
8594105eba Unbreak 'make reinstall' after last commit 2000-05-13 07:39:46 +00:00
David E. O'Brien
7dfe885ec1 Add {kernel,module}-{depend,clean,cleandepend,tags,install,reinstall}
targets.  The {depend,clean,cleandepend,tags,install,reinstall} targets
are composits of the {kernel,module}-* targets (based on NO_MODULES).
2000-05-13 03:15:37 +00:00
David E. O'Brien
77de1b4ff3 Fix modules: target.
Submitted by:	jhb

1. ${.CURDIR}/modules was a confusing way to spell ${.OBJDIR}/modules
2. ${.CURDIR}/../../modules is a verbose, wrong path to the module sources.
   The correct path is $S/modules, since ${.CURDIR} for the kernel may be
   in the obj tree but the sources are in the src tree.
3. The `obj' and `all' steps may be combined, as can `obj' and `depend'.
Submitted by:	bde

Backup ${DESTDIR}/modules to ${DESTDIR}/modules.old to match the same action
done to the kernel.
2000-05-10 17:24:08 +00:00
Yoshihiro Takahashi
a5b52892d8 Sync with sys/conf/Makefile.i386 revision 1.184, 1.185 and 1.186. 2000-05-10 13:57:22 +00:00
Darren Reed
40f251bc6d bring in net/pfil.c for pfil_hooks or ipfilter 2000-05-10 13:43:49 +00:00
Darren Reed
0656ae020e options PFIL_HOOKS -> opt_pfil_hooks.h 2000-05-10 13:43:27 +00:00
John Baldwin
f548daf09f Move UKBD_DFLT_KEYMAP into the options file since USB is machine
independent.  This allows the ukbd0 driver to compile on the Alpha.

Approved by:	o`brien (in principle)
2000-05-09 18:23:38 +00:00
Nick Hibma
8760f39d55 Create a separate target for the 'modules'. Without this the modules
are only rebuilt if the kernel has changed as well.

While there make 'all' and 'modules' a PHONY target.
2000-05-09 10:39:38 +00:00
Doug Rabson
80b173e496 Reserve 145 for DRI graphics system. 2000-05-07 13:31:41 +00:00
Matt Jacob
35be082bb7 add in the few bits necessary to support Alpha 4100 (Rawhide) systems 2000-05-07 04:58:32 +00:00
Jeroen Ruigrok van der Werven
fe43d8e2e0 cdrom.com will be ftpsoftware.com in future, reflect this.
Submitted by:	Alexander Langer <alex@big.endian.de> on IRC
2000-05-06 14:26:13 +00:00
David E. O'Brien
df07109126 Build modules in a subdir of the kernel build dir. Add a `cleandir'
target for those whose fingers try to use that to clean out the modules
build dir.
2000-05-05 06:00:08 +00:00
David E. O'Brien
6a5e9a6adb Set MAKEOBJDIRPREFIX to modules/ in the current directory and build modules
there.
2000-05-04 21:12:28 +00:00
Chuck Robey
10ae1068e5 Cause modules to build with the kernel build. Modules are removed
from the sys Makefile's SUBDIRs.  This is conditioned in make.conf by the
NO_MODULES variable and the existence of the modules directory.  The
actual location of the modules is not modified.  Changes in Makefiles
only, this does not affect Peter's recent changes.

Reviewed by:	Peter Wemm, who warned me I would get some flack, and
		he had the good idea for the NO_MODULES variable.
2000-05-02 02:26:04 +00:00
Nick Hibma
b5ea1f0c77 The USB double bulk pipe driver (Host to host cables). Currently there
are two supported chips, the NetChip 1080 (only prototypes available)
and the EzLink cable. Any other cable should be supported however as they
are all very much alike (there is a difference between them wrt
performance).

It uses Netgraph.

This driver was mostly written by Doug Ambrisko and Julian Elischer and
I would like to thank Whistle for yet another contribution. And my
aplogies to them for me sitting on the driver for so long (2 months).

Also, many thanks to Reid Augustin from NetChip for providing me with a
prototype of their 1080 chip.

Be aware of the fact that this driver is very immature and has only been
tested very lightly. If someone feels like learning about Netgraph however
this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00
Peter Wemm
09be11ba99 Remove KMODDEPS support. All our existing dependencies are specified
via the MODULE_VERSION() and MODULE_DEPEND() macros that both the loader
and kld system know how to deal with.  The old DT_NEEDED tag is still
supported by the loader (and will remain supported for a while) - but the
kernel side presently doesn't know how to deal with DT_NEEDED.
2000-05-01 18:06:49 +00:00
Peter Wemm
ab063af911 Move the MSG* and SEM* options to opt_sysvipc.h
Remove evil allocation macros from machdep.c (why was that there???) and
use malloc() instead.
Move paramters out of param.h and into the code itself.
Move a bunch of internal definitions from public sys/*.h headers (without
#ifdef _KERNEL even) into the code itself.

I had hoped to make some of this more dynamic, but the cost of doing
wakeups on all sleeping processes on old arrays was too frightening.
The other possibility is to initialize on the first use, and allow
dynamic sysctl changes to parameters right until that point. That would
allow /etc/rc.sysctl to change SEM* and MSG* defaults as we presently
do with SHM*, but without the nightmare of changing a running system.
2000-05-01 13:33:56 +00:00
Matthew N. Dodd
68c68f014d Split out the ISA bus front end code into its own file. PCCARD attachment
coming later this week.  Mitsuru IWASAKI provided a patch to -mobile which
I used to make sure I was doing the right thing but only a small part of
the actual patch was used.
2000-05-01 09:05:19 +00:00
Boris Popov
0bcd84403f Reserve major device number for nsmb (SMB/CIFS protocol) device. 2000-05-01 00:49:19 +00:00
Yoshihiro Takahashi
0b09ce0c5b - Added UKBD_DFLT_KEYMAP option.
Pointed out:	Tomokazu HARADA <tkhara@osk4.3web.ne.jp>

- Fixed disordering.
2000-04-30 09:12:48 +00:00
Peter Wemm
02d06d3007 LOAD_ADDRESS is not used here. See conf/ldscript.* for the link base
address.
2000-04-29 06:29:39 +00:00
Doug Rabson
20b11a6003 Reserve register t7 on alpha to point at per-cpu global variables. 2000-04-28 08:44:42 +00:00
Poul-Henning Kamp
599fcb028d Driver for DEC "Tulip" based WAN cards from LanMedia Corporation.
This driver should support both the SSI (V.35 etc) E1/T1 unchannelized,
DS3 and HSSI cards.  Only tested on the SSI card.

More info at: http://www.lanmedia.com

Thanks to LanMedia for donating two LMC1000P cards.

if_de.c driver modified by:     LanMedia
NetGraphification by:   	Stephen Kiernan <sk-ports@vegamuse.org>
2000-04-26 20:16:56 +00:00
David E. O'Brien
0c8aac01b6 Add linker_if.m to the mix. 2000-04-24 23:08:23 +00:00
David E. O'Brien
a4cf58bd99 Use kern/kern_random.c. 2000-04-24 21:53:54 +00:00
David E. O'Brien
b0e56cde37 * Use sys/sys/random.h rather than a i386 specific one.
* There was nothing that should be machine dependant about
  i386/isa/random_machdep.c, so it is now sys/kern/kern_random.c.
2000-04-24 17:30:08 +00:00
Mike Pritchard
b453864c6a Fix the grammar in my previous commit "lose" -> "loss".
I should have done it that way in the first place.

Pointed-out-by:  bde
2000-04-24 08:50:15 +00:00
Mike Pritchard
a9914af5ff Fix a typo in the comments.
Submitted by:	Allen Campbell <allenc@verinet.com>
2000-04-23 16:32:21 +00:00
Yoshihiro Takahashi
40190bd20e Sync with sys/conf/options.i386 revision 1.135. 2000-04-23 09:10:24 +00:00
Bill Paul
bd80fa2c7f Reoganize/update the SysKonnect driver:
- Break out the support for the XMAC II's PHY into an miibus driver.

- Reorganize the probe/attach stuff using newbus. Each XMAC is now
  attached to the parent GEnesis controller using newbus. This is
  necessary since each XMAC must also have an attached miibus, and
  the miibus read/write register routines need to be able to get
  at the softc struct for each XMAC, not the one for the parent
  controller. This allows me to get rid of the grotty code I added
  for selecting the unit numbers for the ifnet interfaces: the unit
  numbers are now derived from the newbus-assigned unit numbers,
  which should track with the ifnet interface numbers. I think.
  At the very least, there should never be any collisions.

- Add support for the SK-9821 and SK-9822 1000baseTX adapters. Special
  thanks to SysKonnect for loaning me two adapters for testing.
2000-04-22 02:16:41 +00:00
Warner Losh
7eaef3ae4b card_if.m used by oldcard now too 2000-04-20 07:55:56 +00:00
Warner Losh
a6fc5fff54 Add kern_event.c 2000-04-17 03:06:27 +00:00
Warner Losh
346ac3302e Forgot to commit this to add card_if.m.
Pointed out by: iwasaki-san.
2000-04-17 02:54:05 +00:00
Mike Smith
300451c472 Some more i386-only BIOS-friendliness:
- Add support for using the PCI BIOS functions for configuration space
   accesses, and make this the default.

 - Make PNPBIOS the default (obsoletes the PNPBIOS config option).

 - Add two new boot-time tunables to disable each of the above.
2000-04-16 20:48:33 +00:00
Poul-Henning Kamp
f7cdd63331 Add the scsi-target driver to LINT. 2000-04-16 06:50:03 +00:00
Robert Watson
a64ed08955 Introduce extended attribute support for FFS, allowing arbitrary
(name, value) pairs to be associated with inodes.  This support is
used for ACLs, MAC labels, and Capabilities in the TrustedBSD
security extensions, which are currently under development.

In this implementation, attributes are backed to data vnodes in the
style of the quota support in FFS.  Support for FFS extended
attributes may be enabled using the FFS_EXTATTR kernel option
(disabled by default).  Userland utilities and man pages will be
committed in the next batch.  VFS interfaces and man pages have
been in the repo since 4.0-RELEASE and are unchanged.

o ufs/ufs/extattr.h: UFS-specific extattr defines
o ufs/ufs/ufs_extattr.c: bulk of support routines
o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes
o contrib/softupdates/ffs_softdep.c: extattr.h includes
o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR

o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h
(This should not be the case, and will be fixed in a future commit)

Currently attributes are not supported in MFS.  This will be fixed.

Reviewed by:	adrian, bp, freebsd-fs, other unthanked souls
Obtained from:	TrustedBSD Project
2000-04-15 03:34:27 +00:00
KATO Takenori
49a8300403 Merged from sys/conf/Makefile.i386 rev 1.182. 2000-04-12 11:19:56 +00:00
Jeroen Ruigrok van der Werven
9d45f43586 The ASUSCOM_IPAC isn't broken according to submitter.
PR:		17840
Submitted by:	Ari Suutari <ari@suutari.iki.fi>
2000-04-10 18:33:23 +00:00
Archie Cobbs
a2b408ad06 Add new options NETGRAPH_MPPC_COMPRESSION and NETGRAPH_MPPC_ENCRYPTION.
(Note: NETGRAPH_MPPC_COMPRESSION is disabled until we find a non-proprietary
implementation of the MPPC compression algorithm.)
2000-04-09 21:15:23 +00:00
Warner Losh
9a8631b340 Add support for compiling kernel modules outside of the tree. If you
do not have the kernel you wish to compile against in either
/usr/src/sys or /sys, then you will need to set SYSDIR to point to the
sys directory of the source tree that contians the source.

Also, minor tweaks to the load/unload targets from Bruce.

I've had this through several make worlds, as well as using it on a
daily basis for the past couple of weeks to build modules needed for
testing at Timing Solutions.

Reviewed and revised by: bde
Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
Doug Rabson
c0de587901 Use makeobjops.pl instead of makedevops.pl. 2000-04-08 15:31:28 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Brian Somers
b44dfc0d29 Don't use ``grep | sed'' in the example for INCLUDE_CONFIG_FILE
when sed can do both.
2000-04-08 00:02:53 +00:00
Yoshihiro Takahashi
4b00895121 Newbusify adv driver.
Reviewed by:	imp
2000-04-07 11:32:42 +00:00
Warner Losh
0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
KATO Takenori
e4197aa9d6 Synced with sys/conf/Makefile.i386 revision 1.181. 2000-04-05 12:54:13 +00:00