on UFS2 inodes are initialised as they are needed, rather than at
newfs time. When quot encountered these inodes it could produce
crazy results.
Now, on UFS2 filesystems, quot's get_inode function will bzero
unallicated inodes before passing them back to a caller. This is
how UFS2 initialises new inodes, so this should work OK.
Also, while I'm here, make quot exit with an error if it finds
inodes of an unknown type. This should help catch future problems
of this type.
Reviewed by: iedowse
MFC after: 1 week
completely noop.
- Geometry sanitization for non-interactive mode is moved to correct place.
Reported by: Anton Yuzhaninov <citrin at citrin dot ru>
Pointyhat: me
wep key configure at key indices > 0 and 802.1x/EAPOL operation
with ap's that want the station to install a key at indices > 0.
Hard work by: Joe Love
Reviewed by: avatar
MFC after: 1 week
ENABLE_WPA_SUPPLICANT_EAPOL is no more, now use NO_WPA_SUPPLICANT_EAPOL
to build with only WPA-PSK support.
Reviewed by: ru, bsdimp (basic approach)
MFC after: 1 week
architecture to pass through to the underlying makefiles. This is
quite useful when building on an i386 box to populate an amd64 NFS
root.
Head nod: dougb
MFC after: 1 week
For example, you can dynamically generate and load configuration file
depending on the hardware configuration with the following template:
mediaSetCDROM
mediaOpen
command='/dist/rescue/sh /dist/scripts/install.sh'
system
mediaClose
configFile=/tmp/generated.cfg
loadConfig
Now we have full access to files on the media before installation begins.
+ Include netinet/in.h for ntohl()
* Since the return value was tested separately, cast the values to
size_t in order to shut up compiler warnings.
+ Raise WARNS= level to 6
PR: bin/71666
snapshot in order to avoid unnecessary re-downloading.
Remove the earlier "rm -f ${SNAPSHOTHASH}.tgz" to make this work.
Suggested by: Lars Engels
MFC after: 7 days
they have been rotated. Among other things, use warnx() instead of warn()
for some messages where the value if errno is irrelevant to the problem
being reported.
MFC after: 5 days
possible for information to be copied from the group file to the group
file in the FTP area. This patch based on a patch from Zak Johnson
<zakj at nox dot cx>.
PR: bin/25851
Submitted by: Ted Mittelstaedt <tedm at toybox punkt placo period com>
Approved by: jhb (proxy mentor)
MFC after: 3 days
MFC to: RELENG_5, RELENG_6
Security: Prevents possible group information leakage
PR: bin/90057
Submitted by: Charlie M. McDonald <BoredOutkast at yahoo punkt com>
Approved by: jhb (mentor by proxy)
MFC to: RELENG_5, RELENG_6
MFC After: 3 days
"crontab /etc/crontab", but not the same format due to the who field.
Add some limited anti-foot-shooting support and refuse to load
/etc/crontab as someone's crontab. Users wishing shoot their foot in
this manner may copy /etc/crontab elsewhere. :)
MFC After: 1 week
This option saves packages to PKGDIR (if defined or current directory by default)
as they are downloaded.
Silent a warning when -n is used and package has a +DISPLAY file.
Approved by: krion
MFC after: 1 week
prefix later, but doing so with @cwd %%OLDPREFIX%% (having
PLIST_SUB+="OLDPREFIX=${PREFIX}") hardcodes the value in the packing
list. That's not really a problem when dealing with ports but that's
a problem with packages since pkg_add -p option only overrides the
first @cwd occurrence.
This patch allow us to use @cwd without any argument. If no
directory argument is given, it will set current working directory
to the first prefix given by the @cwd command.
PR: bin/77212
Submitted by: flz
free(3).
- print_recsrc() should honor shortflag and give appropriate output for
later consumption by /etc/rc.d/mixer. This will ensure that recording
device selections survived across reboot. Output everything to stdout
instead if stderr.
MFC after: 3 days
- The code that creates hints.c and env.c from the skeleton files
moved into separate functions.
- Sanity checks for missing "ident" and "cputype" directives moved
into main(), alongside the existing check for "machine".
PR: bin/90310
Submitted by: Matt Emmerton <matt@gsicomp.on.ca>
for each of udp and tcp (and their IPv6 equivalents when INET6 is
enabled). Note that dependency here.
PR: docs/90435
Submitted by: Dmitry Kazarov <kazarov at mcm dot ru>
Pointed out by: Daniel Gerzo <danger at rulez dot sk>
MFC after: 8 days
classes from say, /lib/geom, cannot be statically linked completely.
Moreover, those shared objects may require other shared objects (i.e.
for geom, libraries like -lmd, -lcrypto).
The libs_so extension to crunchgen fixes this by allowing some libraries
to be linked in dynamically. This requires that a copy of rtld and the
shared libraries be made available to the crunched binary, and so is not
suitable for all environments. Crunchgen configurations which do not
use the 'libs_so' keyword are unaffected and produce identical binaries
with and without this commit.
Approved by: murray (mentor, in spirit), jhb
In collaboration with: Adrian Steinmann <ast at marabu dot ch>
MFC After: 6 weeks
page. I'm pretty sure that this description applies the same way to
ipv6, and at least mentioning SO_DONTROUTE is better than having no
description at all.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
register, remove or change services in the local database. For now only
accept the request if the peer has effective user ID the same as 'root'
user ID.
MFC after: 1 week
is caught. Can be assigned to a window manager shortcut to prevent accidents
with touchpads.
PR: bin/89357
Submitted by: Nick Hibma <nick -at- van-laarhoven.org>
MFC after: 1 week
containing the jailid, path, hostname, ip and the command used to start
the jail.
PR: misc/89883
Submitted by: L. Jason Godsey <lannygodsey -at- yahoo.com>
Reviewed by: phk
MFC after: 1 week
instance, the dreaded shared memory problem in PostgreSQL coming back to
haunt you after a binary update.
PR: 89817
Submitted by: edwin
MFC after: 2 days
much later than before, and it is now after we do a mkdir ../compile/FILE.
As a result, if you do 'config DOESNOTEXIST', it now creates the directory
../config/DOESNOTEXIST. It did not do that before. If DEFAULTS does not
exist, it still fails early before any permanent changes.
This shameless hack restores the old behavior of ensuring the config file
actually exists before mkdiring its counterpart directory.
Now I can rmdir ../compile/D and it will stay dead, after my fingers keep
sabotaging me with 'config D<tab><enter>'. (Some of my kernel names
started with D, which used to be 1-character unique and my fingers knew
this very well...)
this file. With ru@'s approval, change it to this version. In this case we
had to bump the version because the old parser would choke on | in the new
'or' syntax and consider that a device.
Approved by: ru@
Don't keep duplicate files in the files list just to
mark the device as "known" later. XXX: Since the
device list isn't unique (there can be two "device foo"
directives, as this the case with LINT+DEFAULTS), we
have to traverse it all to mark all copies of the same
device as "used", but this is not worse than it was.
proxy for hosts that are reachable through the same interface the
request came in from. This feature is mainly for hosts reachable
through some P2P link, e.g. the gif(4) tunnel.
when printing swapinfo output, rather than (total), as that is (strictly
speaking) more accurate.
Pointed out by: Rob <spamrefuse at yahoo dot com>
MFC after: 3 days
result in abort() beeing called. This is because there is a limit of
the number of groups in the RPC which is 16. When the actual number of
groups is too large it results in xdr_array() returning an error which,
in turn, authunix_create() handles by just calling abort().
Fix this by passing only the first 16 groups to authunix_create().
we're reading response headers. (Handle it as a connection-killing
error, rather than entering an infinite loop reading zero bytes.)
Reported by: simon
Discovered thanks to: A not-very-transparent transparent HTTP proxy.
MFC after: 3 days
given prefix is also used recursively for the dependency packages,
if any. If the -P flag appears after any -p flag on the
command line, it overrides it's effect, causing pkg_add to use the
given prefix recursively.
PR: bin/75742
Submitted by: Frerich Raabe <raabe AT kde DOT org>
MFC after: 3 days
into the contrib directory are still necessary for some of the Makefiles,
because the C-sources there use non-canonical includes ("" includes) to get
at the header files.
Clarify that it is not like the shlib versions, and not like param.h's
__FreeBSD_version/osreldate either.
When config(8) was actively changing a while back, the interface between
config and the build system (eg: /sys/conf/files.* and Makefile.*) was
changing rapidly. configvers is a version number of that interface.
User specified config files do not have a version number. The decision
about whether a user supplied config file is syntactically valid or not
belongs to the parser and sanity checks, not an arbitary number.
are synonymous, but ensure seems slightly closer and does not have the
connotation of buying insurance.
Reported by: Jason McIntyre <jmc at kerhand dot co dot uk>
directory before the specified config file. This is implemented by
opening DEFAULTS as stdin if it exists, and if so resetting stdin to the
actual config file when DEFAULTS is fully parsed via yywrap(). In short,
this lets us create DEFAULTS kernel configs in /sys/<arch>/conf that can
enable certain options or devices by default and allow users to disable
them via 'nooptions' or 'nodevice' rather than having to create kludge
NO_FOO options.
Requested by: scottl
Reviewed by: scottl
because it sets the floppy controller parameters, which requires O_RDWR.
Specifically, the FD_SOPTS ioctl requires this, and the code errors out
and aborts if it can't do it. Among other things, it is changing the
FDOPT_NOERRLOG flag. Broken in 6.0 as well.
to set the floppy controller parameters, but that requires that the
device node be open in O_RDWR mode now. I think it is broken in 6.0 as
well. This line looks like a stray anyway.
the start of the section headers has to take into account the fact
that the image_nt_header is really variable sized. It happens that
the existing calculation is correct for _most_ production binaries
produced by the Windows DDK, but if we get a binary with oddball
offsets, the PE loader could crash.
Changes from the supplied patch are:
- We don't really need to use the IMAGE_SIZEOF_NT_HEADER() macro when
computing how much of the header to return to callers of
pe_get_optional_header(). While it's important to take the variable
size of the header into account in other calculations, we never
actually look at anything outside the non-variable portion of the
header. This saves callers from having to allocate a variable sized
buffer off the heap (I purposely tried to avoid using malloc()
in subr_pe.c to make it easier to compile in both the -D_KERNEL and
!-D_KERNEL case), and since we're copying into a buffer on the
stack, we always have to copy the same amount of data or else
we'll trash the stack something fierce.
- We need <stddef.h> to get offsetof() in the !-D_KERNEL case.
- ndiscvt.c needs the IMAGE_FIRST_SECTION() macro too, since it does
a little bit of section pre-processing.
PR: kern/83477
the parent's signal mask. Once daemon() forked, signals would be ignored
in the child thread. While I'm here, check the return value of daemon().
This fixes termination in the daemon case (bug introduced in last commit).
Noticed by: Frederik Lindberg
status. Add a thread that waits for events on the named pipe instead of
polling the line status via apm or the ACPI sysctl. Additionally, use
robust error handling in case devd goes away or we temporarily can't set
a frequency (i.e., passive cooling has preempted our setting).
Later, this should be improved so that if adaptive control is not being used,
we will block while waiting for AC line events, saving a little CPU.
Submitted by: Frederik Lindberg <fli+freebsd-current/shapeshifter.se>
specified. The result is that the package will be listed with a '?'
as if it was not found within the INDEX file, so fix this behaviour.
* Remove trailing spaces.
PR: bin/87136
Submitted by: Sean Farley <sean-freebsd at farley dot org>
MFC after: 3 days
