Commit Graph

232 Commits

Author SHA1 Message Date
Warner Losh
462fcd56a6 Older versions of the intersil firmware is a lot slower than newer
versions of the firmware.  It responds more slowly to commands, and we
bogusly failed them.  We assume that all versions of the intersil
firmware before 1.0 are 10 times slower and will give it 10x the time
to finish.

# for 5.2 we should always just assume 5s.
2003-12-09 07:41:07 +00:00
Warner Losh
51c3136508 Fix Lucent cards.
o Back out workaround for not resetting lucent cards more than once.  With
  these fixes, it appaers they are no longer necessary.
o Set wi_gone when the card goes awol: typically when we get 0xffff back from
  the card.  Also, don't interact with a card that's gone, so we fail in
  seconds rather than minutes.  Also reduce amount of time we wait to .5s
  in wi_cmd.
o clear wi_gone on ifconfig down to give some cards a chance after they wedge
  (this appears to unwedge one of my prism cards with old firmware).  ifconfig
  up will fail quickly enough if the card really is out to lunch.
o Add delay in wi_init of 100ms.
o wi_stop(ifp, 0->1) changes so that we clear sc_enabled so that we
  exit out of the interrupt routine by just acking the interrupt

Submitted by: iedowse
Approved by: re@ (scottl)

# after the freeze I'll fix some of the minor style issues that reviewers
# of this patch have told me about.
2003-12-02 04:59:59 +00:00
Brian Feldman
def19aab78 Truly fix the lockup mentioned in 1.153. The PRISM hardware is not
capable of functioning in HostAP mode with a zero-length SSID, so
use " " if one is not set.
2003-11-04 23:47:19 +00:00
Brian Feldman
8b42c60645 Despite making the card not lock up, thae workaround from 1.153 didn't
actually make hostap mode work again.  Back it out while I try to find
a solution.
2003-11-04 22:36:48 +00:00
Brian Feldman
2cb7584b69 Fix wi(4)'s WI_RID_SCAN_RES ioctl (wicontrol -L). The wrong length
is computed, so the user thinks that for non-PRISM cards there are
more APs represented than exist.
2003-11-04 00:31:58 +00:00
Brian Feldman
86e011b3e8 On my ZoomAir-branded Intersil PRISM2 cards, if you try to set the
operating mode to HostAP, the card will lock up indefinitely (but
the wi(4) driver can recover if you eject the card).  The problem is
that the card needs to be "reset" in a way before you even change the
media to hostap.  In practice this isn't as noticeable because you
probably do some operation beforehand which prevents the lock-up
before you enable hostap mode.

e.g.:
"ifconfig wi0 up media autoselect mediaopt hostap" will lock up
(if you just inserted the card).
"ifconfig wi0 up ssid foo media autoselect mediaopt hostap" won't lock up.
2003-11-04 00:24:13 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Sam Leffler
b237430cfe mark interrupt handlers MPSAFE 2003-10-29 18:32:14 +00:00
Warner Losh
2e6a21aa7f Sony PEGA-WL110 Wireless LAN
Obtained from: NetBSD (onoe-san)
2003-09-22 05:33:22 +00:00
Warner Losh
45a3024ec7 New Proxim Harmony OEM card.
Submitted by: Jeremy Bingham
2003-09-20 05:27:18 +00:00
Sam Leffler
8df91fc8bc o add experimental radiotap capture format
o add netbsd logic to convert rssi to device-independent values

Obtained from:	NetBSD (rssi conversion code)
2003-09-05 22:29:30 +00:00
Warner Losh
76387a8ff1 This doesn't work, so back them out. 2003-08-24 05:18:10 +00:00
Warner Losh
cfab163573 Return -100 rather than 0 for pccard probe routines. This allows
other drivers to attach to these cards, if so desired.
2003-08-24 03:32:47 +00:00
Warner Losh
90cf0136c4 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:08:17 +00:00
Warner Losh
9125ded8ee LINKSYS2 -> BROMAX 2003-08-21 17:40:59 +00:00
Warner Losh
3d844b955b Update to reflect NETGEAR_2 -> INTERSIL and INTERSIL -> INTERSIL2
changes to pccarddevs.
2003-08-21 17:13:33 +00:00
Sam Leffler
0a915fad5d MFp4 changes to fix locking issues and correct reference
count handling of station entries in hostap mode:

Input path:

o driver is now expected to find the node associated with the
  sender of a received frame; use ic_bss if none is located
o driver passes the (referenced) node into ieee80211_input for
  use within the wlan module and is responsible for cleaning up
  on return
o the antenna state is no longer passed up with each frame; this
  is now considered driver-private state and drivers are responsible
  for keeping it in the driver-private part of a node

Output path:

Revamp output path for management frames to eliminate redundant
locking that causes problems and to correct reference counting
bogosity that occurs when stations are timed out due to inactivity
(in AP mode).  On output the refcnt'd node is stashed in the pkthdr's
recvif field (yech) and retrieved by the driver.  This eliminates
an unref/ref scenario and related node table unlock/lock due to the
driver looking up the node.  This is particularly important when
stations are timed out as this causes a lock order reversal that
can result in a deadlock.  As a byproduct we also reduce the overhead
for sending management frames (minimal).  Additional fallout from
this is a change to ieee80211_encap to return a refcn't node for
tieing to the outbound frame.  Node refcnts are not reclaimed until
after a frame is completely processed (e.g. in the tx interrupt
handler).  This is especially important for timed out stations as
this deref will be the final one causing the node entry to be
reclaimed.

Additional semi-related changes:
o replace m_copym use with m_copypacket (optimization)
o add assert to verify ic_bss is never free'd during normal operation
o add comments explaining calling conventions by drivers for frames
  going in each direction
o remove extraneous code that "cannot be executed" (e.g. because
  pointers may never be null)
2003-08-19 22:17:04 +00:00
Warner Losh
88755a2793 Add microsoft mn-520 wlan card.
Submitted by: Kirk Strauser
2003-08-14 06:30:06 +00:00
Marcel Moolenaar
6098c5e1a2 Add the PCI Id of the Intersil prism3 (mini-PCI) WLAN chip. The Vaio
PCG-505BX (for example) has one of those:

wi0: <Intersil Prism3> mem 0xf8000000-0xf8000fff at device 2.0 on pci2
wi0: 802.11 address: 00:02:8a:94:d8:73
wi0: using RF:PRISM3(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.5.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
2003-08-08 23:33:42 +00:00
John Polstra
c009dcfdc2 Fix a couple of bugs in the resume handler. Don't call the if_init
function unless the device is configured up.  Without this fix, the
device ends up in the RUNNING state even though it is configured down.
Also, check the RUNNING flag before calling the if_start function, in
case the if_init function failed for one reason or another.
2003-07-26 20:54:57 +00:00
Sam Leffler
6e1ca44727 o Add monitor mode support. This tested fine with prism cards but may require
newer lucent/hermes firmware than indicated (investigating).  I'm committing
  this now since it shouldn't hurt anything.
o Vaguely related, add bogus frame length check from netbsd.

Obtained from:	netbsd
2003-07-21 23:20:40 +00:00
Sam Leffler
45bbf62fb5 track changes to 802.11 code:
o override new_state method per new model
o use ieee80211_state_name instead of private copy
2003-07-20 21:38:20 +00:00
Warner Losh
f90eb14ba9 Add Addtron AWA-100 wireless PCI card
Submitted by: Robin Reagan
Pr: 37526
2003-07-19 05:53:57 +00:00
Warner Losh
9b92f5db40 Add Linksys WCF12: from Scott Lambert 2003-07-19 05:51:44 +00:00
Warner Losh
fa3682c1c9 OpenBSD calls this AIRVAST, so use that instead 2003-07-15 07:22:21 +00:00
Warner Losh
6a78c9e48a Add Siemens SpeedStream 1021
Obainted from: openbsd (in spirit); millert
2003-07-15 03:34:08 +00:00
Warner Losh
40d3bedc9e Add support for asus wl100
PR: 49033/53249
2003-07-11 09:19:04 +00:00
Warner Losh
247056ed2a Add corega PCCL-11 to match entry added to pccarddevs a while ago.
Noticed going into openbsd...
2003-07-07 07:57:35 +00:00
Scott Long
b3655267ff Revert the previous commit, it snuck in by accident.
Submitted by:	ru
2003-07-03 10:16:40 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Sam Leffler
91f243876f catch failure to fetch the card's "own channel"; this should not happen 2003-06-29 20:14:35 +00:00
Sam Leffler
2c71d3c795 update for new 802.11 support 2003-06-28 06:17:26 +00:00
Sam Leffler
3cd0b4fd09 Return support needed by dstumbler:
o add back rx monitor support
o make WI_RID_SCAN_RES DTRT
o fix a bug handling zero-length RID requests (used by dstumbler to set
  a zero-length SSID)
o make RID_SCAN_REQ DTRT
o add back WI_RID_OWN_SSID
o fix wi_scan_ap to take a channel mask and txrate (for prism cards)

These changes fix dstumbler -o (monitor mode).  A minor change to dstumbler
is needed to get normal AP scanning mode to work right; this is preferred to
modifying the driver.

PR:		kern/53187
Reviewed by:	Bruce M Simpson <bms@spc.org>
2003-06-27 00:49:04 +00:00
Warner Losh
9b1b4524e6 As a workaround for the latest problems, don't init hermes cards more
than once.  This appears to work around the hanging issues, at the
expense of warnings about bad RID allocations.  I'm not sure this is a
permanant workaround, but does appear to help in the tests that I've
done here.
2003-06-13 00:40:37 +00:00
Warner Losh
c88a674b8d ARtem ONAIR card
Submitted by: Ben Gras
2003-06-11 16:56:02 +00:00
Warner Losh
7988ce93e8 Minor tweaks that are effectively all style tweaks. 2003-06-11 16:51:27 +00:00
Warner Losh
729a248d63 Call wi_free() in all the relevant error cases. 2003-06-11 16:41:07 +00:00
Warner Losh
459caa871c Call wi_free on the failure cases of pccard.
Tested by: scottl
2003-06-11 16:39:20 +00:00
Warner Losh
854cb5a41a Don't hold a driver lock across bus_teardown_intr. Jhb points out
that one cannot generally hold a lock and call bus_teardown_intr.
This is race free with wi_intr because bus_teardown_intr won't allow
wi_intr to be called after it returns.

# jeff hsu points out that there might be a race between this unlock
# and wi_start.  While that may be true also, it won't impact this commit.

Submitted by: jhb
2003-04-29 03:22:39 +00:00
Warner Losh
c14b840a2b Initialize error. 2003-04-27 23:44:05 +00:00
Warner Losh
a4da74c1d9 Make 2/3 of my symbol cards work again. The 3rd symbol card card has
firmware 1.50.12, but 2.20.1 and 3.10.4 work.  The 1.50.12 card gets
past doing dhclient, but hangs on transmit a little after the ip
address is set.  The 1.50.12 card has always been 'cranky' and Bill
Paul's tearing it apart at FreeBSD '99 hasn't helped.

sc_reset and sc_enable are subtlely different things.  sc_reset means
exactly "WI_CMD_INI has happened."  sc_enabled means "WI_CMD_ENABLE
has been sent to the card without a WI_CMD_DISABLE following."  This
is a little different than what they mean on NetBSD (where both of
these concepts are comingled).  NetBSD will try to only enable symbol
cards once, while FreeBSD only sends the WI_CMD_INI once.

Also, only try once to reset the card on a symbol.

This makes the lucent cards no worse than before, but apparently not
much better either.  I got fewer hangs in my testing than I have in
the past, but I don't know if it is statistically significant or not.
2003-04-27 15:56:05 +00:00
Warner Losh
7110005e4b Add generic OEM1 PRISM3 card.
Submitted by: mwlucas
2003-04-27 03:34:05 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Warner Losh
81f290a510 Fix interrupt race.
From NetBSD
2003-04-10 07:55:55 +00:00
Warner Losh
f5746231ff Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
Warner Losh
2701fed4cf Back out the _ND change. I plan on making all drivers default to that with
a special _DESC version for those cards whose CIS is insufficient for some
reason.  This should save about 3k of kernel strings when complete.
2003-04-10 04:14:35 +00:00
Warner Losh
b899d58ee4 Use the new _ND macros to not include the description strings. If any
of the entries have a description, we'll use that to override the
description that the pccard layer generates for us.

This saves about 930 bytes in the module, so I feel it won't hurt the
crowded boot disks....

# other modules to follow
2003-04-08 15:36:43 +00:00
Warner Losh
c3805dd0ad Don't set the decription, since the pccard layer does that for us now.
Remove the duplicate entries that were there to disambiguate different
cards that were the same, yet people wanted to have different dmesg.
2003-04-08 15:26:02 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Warner Losh
fb9e391927 MFP4 27224 and 27225:
Change 27224 by imp@imp_hammer on 2003/03/22 00:16:22
	Put what I think are the correct TX RATE translation tables
	in place for LUCENT firmware.  This is based on the 4.x driver.
	Maybe it should be table driven?

	ifconfig wi0 media DS/11Mbps still fails, but it fails before
	we even get to the txrate stuff, so other things are wrong.

Change 27225 by imp@imp_hammer on 2003/03/22 00:45:11
	Default ic_fixed_rate to -1.  This is the same thing as autoselect.
	There really should be a #define for this...
2003-03-22 15:39:38 +00:00