[X86] SSE4_A should only imply SSE3 not SSSE3 in the frontend.
SSE4_1 and SSE4_2 due imply SSSE3. So I guess I got confused when
switching the code to being table based in D83273.
Fixes PR47464
This should fix builds with -march=amdfam10 emitting SSSE3 instructions
such as pshufb, which lead to programs crashing with SIGILL on such
processors.
Reported by: avg
MFC after: 6 weeks
X-MFC-With: r364284
getlogin_r is specified by POSIX to to take a size_t len, not int. Fix our
version to do the same, bump the symbol version due to ABI change and
provide compat.
This was reported to break compilation of Ruby 2.8.
Some discussion about the necessity of the ABI compat did take place in the
review. While many 64-bit platforms would likely be passing it in a 64-bit
register and zero-extended and thus, not notice ABI breakage, some do
sign-extend (e.g. mips).
PR: 247102
Submitted by: Bertram Scharpf <software@bertram-scharpf.de> (original)
Submitted by: cem (ABI compat)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26335
A bug in the EFI HTTP driver of TianoCore EDK2 causes memory
corruption when an http instance that uses tls is reconfigured,
leading to a crash.
Work around this by forcing a new http instance for each request
instead of reconfiguring the existing one.
The upstream bug report is https://bugzilla.tianocore.org/show_bug.cgi?id=1917
Submitted by: bcran
Reviewed By: imp, kevans, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21281
purpose of epoch_trace() and for calling subsequent panic, but to keep
code fully under INVARIANTS, so don't use bare function call to panic().
However, at the last stage of review a true value slipped in, while
always false was assumed. I checked that in email archive with kib@.
Noticed by: trasz
The request offset and length are always unsigned, so print them as
such.
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21388
stacks with a SENT_FIN outstanding. Both rack and bbr will only send a
FIN if all data is ack'd so this must be enforced. Also if the previous stack
sent the FIN we need to make sure in rack that when we manufacture the
"unknown" sends that we include the proper HAS_FIN bits.
Note for BBR we take a simpler approach and just refuse to switch.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D26269
Currently, certctl rehash will just keep clobbering .0 rather than
incrementing the suffix upon encountering a duplicate. Do this, and do it
for blacklisted certs as well.
This also improves the situation with the blacklist to be a little less
flakey, comparing cert fingerprints for all certs with a matching subject
hash in the blacklist to determine if the cert we're looking at can be
installed.
Future work needs to completely revamp the blacklist to align more with how
it's described in PR 246614. In particular, /etc/ssl/blacklisted should go
away to avoid potential confusion -- OpenSSL will not read it, it's
basically certctl internal.
PR: 246614
Reviewed by: Michael Osipov <michael.osipov siemens com>
Tested by: Michael Osipov
With suggestions from: Michael Osipov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26167
Main changes:
* Vim-style expandtab option
* Provides Turkish translation
* Backspace now deletes \ rather than being escaped
* T during motion commands is now VI-compatible
* Encoding related fixes, such as UTF-8 detection
* Fixed a number of memory management issues
MFC after: 3 weeks
This is being addressed as part of a side-patch I'm working on that builds
all the things with WARNS=6, instead of relying on it being supplied in just
shallow parts of the build with higher-level Makefile.inc.
Provide a prototype for mod_main and annotate the thread function argument
as unused.
MFC after: 1 week
In a side-change that I'm working on to start defaulting src builds to
WARNS=6 where WARNS isn't otherwise specified, GCC6 (and clang, to a lesser
extent) pointed out a number of issues with the resolv tests:
- Global method variable that gets shadowed in run_tests()
- Signed/unsigned comparison between i in run_tests() and hosts->sl_cur
The shadowed variable looks like it might actually be bogus as written, as
we pass it to RUN_TESTS -> run_tests, but other parts use the global method
instead. This change is mainly geared towards correcting that by removing
the global and plumbing the method through from run_tests -> run into the
new thread.
For the signed/unsigned comparison, there's no compelling reason to not just
switch i/nthreads/nhosts to size_t.
The review also included a change to the load() function that was better
addressed by jhb in r365302.
Reviewed by: ngie, pstef
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24844
Currently, WITHOUT_PORTSNAP forces WITHOUT_FREEBSD_UPDATE because the
latter relies on phttpget, which lives inside the portsnap build bits.
Remove the dependency between these two options by moving phttpget out into
^/libexec and building/installing it if either WITH_PORTSNAP or
WITH_FREEBSD_UPDATE.
Future work could remove the conditional if it's decided that users will use
it independently of either the current in-base consumers.
Reported by: swills
Reviewed by: jilles, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26255
Add support for user-supplied callbacks into phys pager operations,
providing custom getpages(), haspage(), and populate() methods
implementations. Pager stores user data ptr/val in the object to
provide context.
Add phys_pager_allocate() helper that takes user ops table as one of
the arguments.
Current code for these methods is moved to the 'default' ops table,
assigned automatically when vm_pager_alloc() is used.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24652
When emulating a single thread system for testing reasons, mp_maxid can
be 0. This trips up our math for calculating the order.
Account for this to fix xive attachment when emulating a single-thread
core on qemu powernv (a configuration that doesn't exist in the real world.)
Sponsored by: Tag1 Consulting, Inc.
Future changes would require additional initialization of OBJT_PHYS
objects, and vm_object_allocate() is not suitable for it.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24652
Adjust a couple of printf() lines that deal with dumping out addresses
to cast to uintmax_t.
This allows building a 64-bit libofw for use in things like a future
Petitboot loader for PowerPC64, and other FDT platforms that require
a 64-bit loader binary and want to use forth.
Sponsored by: Tag1 Consulting, Inc.
When doing a build for a modern CPUTYPE, llvm will throw errors if obsolete
instructions are used, even if they will never run due to runtime checks.
Hiding the dssall instruction from the assembler fixes kernel build when
overriding CPUTYPE, without having any effect on the generated binary.
This has been in my local tree for over a year and is well tested across
a variety of machines.
Sponsored by: Tag1 Consulting, Inc.
When enabling an interrupt, assert that we do in fact have a root PIC.
This would have saved me some debugging effort.
Sponsored by: Tag1 Consulting, Inc.
The cryptodev_process() method should either return 0 if it has
completed a request, or ERESTART to defer the request until later. If
a request encounters an error, the error should be reported via
crp_etype before completing the request via crypto_done().
Fix a few more drivers noticed by asomers@ similar to the fix in
r365389. This is an old bug, but went unnoticed since crypto requests
did not start failing as a normal part of operation until digest
verification was introduced which can fail requests with EBADMSG.
PR: 247986
Reported by: asomers
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26361
There are multiple USB/SATA bridges on the market that unconditionally
cut some LBAs off connected media. This could be a problem
for pre-partitioned drives so GEOM complains and does not create
devices in /dev for slices/partitions preventing access to existing data.
We have kern.geom.part.check_integrity that allows us to correct
partitioning if changed from default 1 to 0 but it works for MBR only.
If backup copy of GPT is unavailable due to decreases number of LBAs,
kernel still does not give access to partitions and prints to dmesg:
GEOM: md0: corrupt or invalid GPT detected.
GEOM: md0: GPT rejected -- may not be recoverable.
This change makes it work for GPT too, so it created partitions in /dev
and prints to dmesg this instead:
GEOM: md0: the secondary GPT table is corrupt or invalid.
GEOM: md0: using the primary only -- recovery suggested.
Then "gpart recover" re-created backup copy of GPT
and allows further manipulations with partitions.
This change is no-op for default configuration having
kern.geom.part.check_integrity=1
Reported by: Alex Korchmar
MFC after: 3 days.
Doing it this way eliminates the assumption about homogeneous support
for the feature, since HWCAP values are only set if support is present
on all CPUs.
Reviewed by: tuexen, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26032
Expose some of the new HWCAP features added in r65304. This includes the
addition of elf_hwcap2 into the sysvec, and a separate function to parse
for those features.
This only exposes features which require no further configuration, e.g.
indicating the presence of certain instructions. Larger features (SVE)
will not be advertised until we actually support them. The exact list of
features/extensions this patch exposes is:
- ARMv8.0-DGH
- ARMv8.0-SB
- ARMv8.2-BF16
- ARMv8.2-DCCVADP
- ARMv8.2-I8MM
- ARMv8.4-LRCPC
- ARMv8.5-CondM
- ARMv8.5-FRINT
- ARMv8.5-RNG
- PSTATE.SSBS
While here, annotate elf_hwcap and elf_hwcap2 as __read_frequently, and
move the declarations to the machine/md_var.h header.
Submitted by: mikael@ (D22314 portion)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26031
Differential Revision: https://reviews.freebsd.org/D22314
FreeBSD exports CPU features as bits in the AT_HWCAP and AT_HWCAP2
vectors via elf_aux_info(3). This interface is similar to getauxval(3)
on Linux, and for simplicity to consumers we try to maintain an
identical set of feature flags on arm64.
The first batch of AT_HWCAP flags were added in r350166, corresponding
to definitions that already existed in Linux. Unfortunately, one flag
was missed, and a portion of the values are shifted one bit to the right
as a result.
Add the missing definition for HWCAP_ASIMDHP, and adjust the affected
values to match their Linux counterparts.
Although this is an ABI-breaking change, there is no plan to provide
compat code for old binaries. An audit of our ports tree and other
software via Debian code search indicates that there are not yet any
consumers of this interface for FreeBSD/arm64.
Bump __FreeBSD_version to be on the safe side, in case compat code needs
to be added in the future.
Reviewed by: emaste, manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26329
There's a race where dying vnets move their interfaces back to their original
vnet, and if_epair cleanup (where deleting one interface also deletes the other
end of the epair). This is commonly triggered by the pf tests, but also by
cleanup of vnet jails.
As we've not yet been able to fix the root cause of the issue work around the
panic by not dereferencing a NULL softc in epair_qflush() and by not
re-attaching DYING interfaces.
This isn't a full fix, but makes a very common panic far less likely.
PR: 244703, 238870
Reviewed by: lutz_donnerhacke.de
MFC after: 4 days
Differential Revision: https://reviews.freebsd.org/D26324
This option was marked as broken because our riscv64-xtoolchain-gcc
package lacked support. Since we are moving away from xtoolchain gcc in
favor of freebsd-gcc9, there should be no issue in enabling this option
by default.
Notably, this enables -Wformat errors.
Reviewed by: kp, jhb
Differential Revision: https://reviews.freebsd.org/D26320
RISC-V is currently built with -Wno-format, which is how these went
undetected. Address them now before re-enabling those warnings.
Differential Revision: https://reviews.freebsd.org/D26319
A PL061 is a simple 8 pin GPIO controller. This GPIO device is used to
signal an internal request for shutdown on some virtual machines including
Arm-based Amazon EC2 instances.
Submitted by: Ali Saidi <alisaidi_amazon.com> (previouss version)
Reviewed by: Ali Saidi, manu
Differential Revision: https://reviews.freebsd.org/D24065
o Enhance dependency loop logging: print full chain instead of the
last link competing the loop;
o Add -g option to generate dependency graph suitable for GraphViz
visualization, loops and other graph generation issues are highlighted
automatically;
o Add -p option that enables grouping items that can be processed in
parallel.
Submitted by: Boris Lytochkin <lytboris at gmail>
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25389
This is a fix to r334065.
Without this change I once got stuck I/O with endless partition switching:
(sdda0:aw_mmc_sim2:0:0:0): sddastart
(sdda0:aw_mmc_sim2:0:0:0): Partition 0 -> -525703168
(sdda0:aw_mmc_sim2:0:0:0): xpt_action: func 0x91d XPT_MMC_IO
(sdda0:aw_mmc_sim2:0:0:0): xpt_done: func= 0x91d XPT_MMC_IO status 0x1
(sdda0:aw_mmc_sim2:0:0:0): sddadone
(sdda0:aw_mmc_sim2:0:0:0): Card status: 00000000
(sdda0:aw_mmc_sim2:0:0:0): Current state: 4
(sdda0:aw_mmc_sim2:0:0:0): Compteting partition switch to 0
Note that -525703168 (an int) is 0xe0aa6800 in binary representation.
The partition indexes are actually stored as uint8_t, so that value
was converted / truncated to zero.
MFC after: 1 week
Implement the remaining pieces needed to allow userland timestamp reading.
Rewritten based on an intial essay into the problem by Justin Hibbits.
(Copyright changed to my own on his request.)
Tested on ppc64 (POWER9 Talos II), powerpcspe (e500v2 RB800), and
powerpc (g4 PowerBook).
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26347
Work around llvm 11 miscompile in 32 bit powerpc that appears to cause ifuncs
to branch to the wrong address by forcing -O2. This worked in previous
versions because -O was mapped to -O2 previously (but is now -O1.)
While here, remove the old temporary workaround from r224882 that does the
opposite thing for powerpc non-DEBUG kernels, bringing it in line with other
platforms that compile at -O2.
This fixes kernel boot on powerpc and powerpcspe after the llvm11 transition.
Sponsored by: Tag1 Consulting, Inc.
This allows use of the standard src.conf configuration for controlling
whether the tree is cleaned before build or not. The default is still
to clean.
Setting either NOCLEAN or NO_CLEAN will mention the new src.conf option.
NOCLEAN remains a .warning, while for now NO_CLEAN is .info.
Reviewed by: bdrewery (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22762
