o The function is defined unconditionally but depends on SPR_SVR,
which is defined conditionally.
o spr.h defines mfspr() and mtspr(), which is no worse to use.
while holding the socket buffer lock. These leads to an
immediate panic due to recursing the socket buffer lock. This
bug was introduced in uipc_syscalls.c:1.240, but masked by
another bug until that was fixed in uipc_syscalls.c:1.269.
Note that the current fix isn't perfect, but better than
panicking: normally we guarantee that simultaneous invocations
of a system call to write on a stream socket won't be
interlaced, which is ensured by use of the socket buffer sleep
lock. This is guaranteed for the sendfile headers, but not
trailers. In practice, this is likely not a problem, but
should be fixed.
MFC after: 3 days
Pointy hat to: andre (1.240), cperciva (1.269)
Retire pmap_track_modified(). We no longer need it because we do not
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
Approved by: imp
total of 6 interrupt resources for scc(4) on macio(4). This
is 3 per channel, of which the 1st of each channel is the
interrupt associated with the SCC. The other 2 are for DMA
operation.
Change scc_bfe_attach() to accept an argument that's the
number of interrupts per channel (ipc) and change each bus
front-end (bfe) to pass that argument through a wrapper
for the device_attach method.
For now, we only allocate the 1st interrupt of each channel
to perserve behaviour.
by the parent for interrupt resources. This corrects parsing of
the interrupts property.
With parsing of the property fixed, add all interrupts to the
resource list. Bump the max. number of interrupts from 5 to 6
as scc(4) attached to macio(4) has 6 interrupts (3 per channel).
Submitted by: Nathan Whitehorn <nathanw@uchicago.edu>
- detect number of LAWs in run time and initalize accordingly
- introduce decode windows target IDs used in MPC8572
- other minor updates
Obtained from: Freescale, Semihalf
doesn't require parts of the Expansion ROM to be copied around,
for obtaining the MAC address on !OFW platforms.
- Don't unnecessarily cache bus space tag and handle nor RIDs
in the softcs of the front-ends.
- Don't use function calls in initializers.
- Let the SBus front-end depend on sbus(4).
info about all currently mounted file systems. When an address is given
as an argument, prints detailed info about the given mount point.
MFC after: 2 weeks
infrastructure. Its only consumer ever was sio(4) and thus was
unused on sparc64 since removing the last traces of sio(4) in
sparc64 configuration files in favor for uart(4) over three
years ago. If similar functionality is required again it should
be brought back as an MD intr_pending() which works for all
busses by using for example interrupt controller hooks.
when creating the parent bus DMA tag. While at it correct the style
and a nearby comment.
- Take advantage of m_collapse(9) for performance reasons.
MFC after: 2 weeks
PR 122839 is fixed in both em and in igb
Second, the issue on building modules since the static kernel
build changes is now resolved. I was not able to get the fancier
directory hierarchy working, but this works, both em and igb
build as modules now.
Third, there is now support in em for two new NICs, Hartwell
(or 82574) is a low cost PCIE dual port adapter that has MSIX,
for this release it uses 3 vectors only, RX, TX, and LINK. In
the next release I will add a second TX and RX queue. Also, there
is support here for ICH10, the followon to ICH9. Both of these are
early releases, general availability will follow soon.
Fourth: On Hartwell and ICH10 we now have IEEE 1588 PTP support,
I have implemented this in a provisional way so that early adopters
may try and comment on the functionality. The IOCTL structure may
change. This feature is off by default, you need to edit the Makefile
and add the EM_TIMESYNC define to get the code.
Enjoy all!!
assumptions about the state of the cooling devices. Instead, switch them
off on init and, only after that, we are in TZ_ACTIVE_NONE.
Submited by: Andriy Gapon <avg at icyb.net.ua>
Reviewed by: njl
from idle over the next tick.
- Add a new MD routine, cpu_wake_idle() to wakeup idle threads who are
suspended in cpu specific states. This function can fail and cause the
scheduler to fall back to another mechanism (ipi).
- Implement support for mwait in cpu_idle() on i386/amd64 machines that
support it. mwait is a higher performance way to synchronize cpus
as compared to hlt & ipis.
- Allow selecting the idle routine by name via sysctl machdep.idle. This
replaces machdep.cpu_idle_hlt. Only idle routines supported by the
current machine are permitted.
Sponsored by: Nokia
o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to
legal values.
o Use appropriate maxsize, nsegments and maxsegsize parameters when
creating DMA tags and correct some comments related to them.
o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
some time now so collapse calls accordingly.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
hme_rint() and hme_start_locked().
o Keep state of the link state and use it to enable or disable the MAC
in hme_mii_statchg() accordingly as well as to return early from
hme_start_locked() in case the link is down.
o Introduce a sc_flags and use it to replace individual members like
sc_pci.
o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(),
hme_mii_writereg() and hme_stop() to ensure the respective bit
has been written before we starting polling on it and for the right
bits to change.
o Rather just returning in case hme_mac_bitflip() fails and leaving us
in an undefined state report the problem and move on; chances are
the requested configuration will become active shortly after.
o Don't call hme_start_locked() in hme_init_locked() unconditionally
but only after calls to hme_init_locked() when it's appropriate, i.e.
in hme_watchdog().
o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf().
o In hme_load_txmbuf():
- use a maximum of the newly introduced HME_NTXSEGS segments instead
of the incorrect HME_NTXQ, which reflects the maximum TX queue
length, for loading the mbufs and put the DMA segments back onto
the stack instead of the softc as 16 should be ok there.
- use the common errno(2) return values instead of homegrown ones,
- given that hme_load_txmbuf() is allowed to fail resulting in a
packet drop for quite some time now implement the functionality of
hme_txcksum() by means of m_pullup(9), which de-obfuscates the code
and allows to always retrieve the correct length of the IP header, [1]
- also add a KASSERT which asserts nsegs is valid,
- take advantage of m_collapse(9) instead of m_defrag(9) for
performance reasons.
o Don't bother to check whether the interface is running or whether its
queue is empty before calling hme_start_locked() in hme_tint(), the
former will check these anyway.
o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may
take quite a while to return when it calls hme_start_locked().
o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly.
o Add a shadow sc_ifflags so we don't reset the chip when unnecessary.
o Handle IFF_ALLMULTI correctly. [2]
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o Use the maximum of 256 TX descriptors for better performance as using
all of them has no additional static cost rather than using just half
of them.
Reported by: rwatson [2]
Suggested by: yongari [1]
Reviewed by: yongari
MFC after: 1 month
in order to get rid of bus space handle and tag in struct sym_hcb.
- Remove unused members related to bus addresses in struct sym_hcb.
- sym(4) takes care of allocating an instance of struct sym_hcb
itself so don't let newbus allocate it as an unused softc also.
- Add basic MPSAFE locking. This includes changing the sym(4) CCBs
to be allocated up-front instead of on demand as needed. Besides
making these allocations more likely to succeed, this also solves
the problem of calling bus_dmamap_create(9) with the SIM mutex
held.
Reviewed by: scottl
MFC after: 1 month
- Remove superfluous returns in functions returning void.
- In sym_alloc_lcb_tags() return directly instead of jumping
to a label which just returns.
- Fix some spelling in comments.
- Remove trailing whitespace.
exit requires entering the audit code. The result is much the same,
but they mean different things.
MFC afer: 3 days
Submitted by: Diego Giagio <dgiagio at gmail dot com>
the method for the (indent == NULL) case (i.e. the kern.geom.conftxt
sysctl). The purpose is to extend the conftxt output with scheme-
specific fields which can be used by libdisk. In particular, have
the schemes dump the xs and xt fields, which contain the backward
compatible values for class type and partition type. This allows
libdisk to work with the legacy slicers as well as with gpart and
helps/promotes migration.
