Add shims to map NetBSD's API to CPUSET(9). Obviously the invalid input
parts of these tests are relatively useless since we're just testing the
shims that aren't used elsewhere, there's still some amount of value in
the parts testing valid inputs.
Differential Revision: https://reviews.freebsd.org/D27307
This reverts commit 89e3d5671b.
As pointed out, there are several problems with that commit:
1. The new semantics, while useful for clients where multiple
threads use separate contexts, breaks clients which correctly
share a single one
2. Change in semantics would require a library version bump
3. It doesn't build with GCC
Fix error in extent_try_coalesce_impl(), which could cause abort
to happen when trying to coalesce extents backwards. The error could
happen because of how extent_before_get() function works. This function
gets address of previous extent, by subtracting page size from current
extent address. If current extent is located at PAGE_SIZE offset, this
address resolved to 0x0000. An assertion in rtree_leaf_elm_lookup
then caused the running program to abort.
This problem was discovered when trying to build world on 32-bit
machines with ASLR and PIE enabled. The problem was encountered
on armv7 and i386 machines, but most likely other 32-bit
architectures are affected as well.
While this patch fixes one problem with buildworld on 32-bit platforms
with ASLR, the build still fails, however it happens much later
and due to lack of memory.
The change is aligned with accepted fix in the upstream Jemalloc
repository (https://github.com/jemalloc/jemalloc/pull/1973).
As it doesn't apply on top of Jemalloc tree, its updated version
was eventually merged: https://github.com/jemalloc/jemalloc/pull/2003
PR: 249937
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D27025
Apply upstream fix 08968baec1122a58bb90d8f97ad948a75f8a5d69:
Fix error cases when udp-connect is set and send() returns an error
Obtained from: unbound git
MFC after: 3 days
Sync libarchive with vendor.
Vendor changes:
Issue #1461: Unbreak build without lzma
Issue #1462: warc reader: Fix build with gcc11
Issue #1463: Fix code compatibility in test_archive_read_support.c
Issue #1464: Use built-in strnlen on platforms where not available
Issue #1465: warc reader: fix undefined behaviour in deconst() function
MFC after: 3 days
X-MFC-With: 368234
Vendor changes:
Issue #1461: Unbreak build without lzma
Issue #1462: warc reader: Fix build with gcc11
Issue #1463: Fix code compatibility in test_archive_read_support.c
Issue #1464: Use built-in strnlen on platforms where not available
Issue #1465: warc reader: fix undefined behaviour in deconst() function
[RISCV] Set __GCC_HAVE_SYNC_COMPARE_AND_SWAP_x defines
The RISCV target did not set the GCC atomic compare and swap defines,
unlike other targets. This broke builds for things like glib on
RISCV.
Patch by Kristof Provost (kprovost)
Differential Revision: https://reviews.llvm.org/D91784
This should fix building glib20 on RISC-V and unblock a number of
dependent ports.
Requested by: kp
MFC after: 3 days
This is addressing cases such as fts_read(3) encountering an [EIO]
from fchdir(2) when FTS_NOCHDIR is not set. That would otherwise be
seen as a successful traversal in some of these cases while silently
discarding expected work.
As noted in r264201, fts_read() does not set errno to 0 on a successful
EOF so it needs to be set before calling it. Otherwise we might see
a random error from one of the iterations.
gzip is ignoring most errors and could be improved separately.
Reviewed by: vangyzen
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27184
Part of the libregex functionality leaked into the tests it shares with
the standard regex(3). Introduce a P flag to set the REG_POSIX cflag to
indicate that libc regex should effectively do nothing while libregex should
specifically run it in non-extended mode.
This unbreaks the libc/regex test run.
Reported by: Jenkins
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
Implement computeHostNumHardwareThreads() for FreeBSD
This retrieves CPU affinity via FreeBSD's cpuset(2) API, and makes
LLVM respect affinity settings configured by the user via the
cpuset(1) command.
In particular, this allows to reduce the number of threads used on
machines with high core counts, which can interact badly with
parallelized build systems. This is particularly noticable with lld,
which spawns lots of threads even for linking e.g. hello_world!
This fix is related to PR48193, but does not adress the more
fundamental problem, which is that LLVM by default grabs as many CPUs
and/or threads as possible.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D92271
Originally by: mjg
MFC after: 1 week
landed upstream:
For llvm's internal function which retrieves the number of available
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.
This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.
This will also be submitted upstream.
Submitted by: mjg
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
Check label's ranges for address we want to translate if a CU doesn't
have usable DW_AT_range or DW_AT_low_pc.
Use more appropriate names: "struct CU" -> "struct range"
Developed as part of upstream ELF Tool Chain bug report
https://sourceforge.net/p/elftoolchain/tickets/552/ although this does
not address the specific case reported there.
Submitted by: Tiger Gao <tig@freebsdfoundation.org>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23782
Instead of using a simple global++ as the data race, with this change we
perform the increment by loading the global, delaying for a bit and then
storing back the incremented value. If I move the increment outside of the
mutex protected range, I can now see the data race with only 100 iterations
on amd64 in almost all cases. Before this change such a racy test almost
always passed with < 100,000 iterations and only reliably failed with the
current limit of 10 million.
I noticed this poorly written test because the mutex:mutex{2,3} and
timedmutex:mutex{2,3} tests were always timing out on our CheriBSD Jenkins.
Writing good concurrency tests is hard so I won't attempt to do so, but this
change should make the test more likely to fail if pthread_mutex_lock is not
implemented correctly while also significantly reducing the time it takes to
run these four tests. It will also reduce the time it takes for QEMU RISC-V
testsuite runs by almost 40 minutes (out of currently 7 hours).
Reviewed By: brooks, ngie
Differential Revision: https://reviews.freebsd.org/D26473
-fstack-clash-protection was added in Clang commit e67cbac81211 but was
enabled only on Linux. It should work fine on FreeBSD as well, so
enable it.
To be discussed and upstreamed with a test. The OS test should probably
just be removed.
Reviewed by: dim
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27366
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o More code cleanup and refactoring.
o More unit tests
MFC after: 1 week
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.
This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.
This will also be submitted upstream.
Submitted by: mjg
MFC after: 1 week
make it create the temporary file in the same directory as the source
file by default, instead of always using $TMPDIR or /tmp. If creating
that file fails because the directory is not writable, also fallback to
$TMPDIR or /tmp.
This has also been submitted upstream as:
https://sourceforge.net/p/elftoolchain/tickets/597/
Reported by: cem
PR: 250872
MFC after: 2 weeks
[ELF] Don't consider SHF_ALLOC ".debug*" sections debug sections
Fixes PR48071
* The Rust compiler produces SHF_ALLOC `.debug_gdb_scripts` (which
normally does not have the flag)
* `.debug_gdb_scripts` sections are removed from `inputSections` due
to --strip-debug/--strip-all
* When processing --gc-sections, pieces of a SHF_MERGE section can be
marked live separately
`=>` segfault when marking liveness of a `.debug_gdb_scripts` which
is not split into pieces (because it is not in `inputSections`)
This patch circumvents the problem by not treating SHF_ALLOC
".debug*" as debug sections (to prevent --strip-debug's stripping)
(which is still useful on its own).
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D91291
This should fix lld segfaulting when linking the rust-based parts of the
devel/py-maturin port.
Reported by: Nick Venenga <nijave@gmail.com>
PR: 250783
MFC after: 3 days
[PowerPC] Skip combining (uint_to_fp x) if x is not simple type
Current powerpc64le backend hits
```
Combining: t7: f64 = uint_to_fp t6
llc: llvm-project/llvm/include/llvm/CodeGen/ValueTypes.h:291:
llvm::MVT llvm::EVT::getSimpleVT() const: Assertion `isSimple() &&
"Expected a SimpleValueType!"' failed.
```
This patch fixes it by skipping combination if `t6` is not simple
type.
Fixed https://bugs.llvm.org/show_bug.cgi?id=47660.
Reviewed By: #powerpc, steven.zhang
Differential Revision: https://reviews.llvm.org/D88388
This should fix the llvm assertion mentioned above when building the
following ports for powerpc64le:
* audio/traverso
* databases/percona57-pam-for-mysql
* databases/percona57-server
* emulators/citra
* emulators/citra-qt5
* games/7kaa
* graphics/dia
* graphics/mandelbulber
* graphics/pcl-pointclouds
* net-p2p/libtorrent-rasterbar
* textproc/htmldoc
Requested by: pkubaj
MFC after: 3 days
Lots of new unit-tests increase code coverage.
Lots of refactoring, cleanup and simlpification to reduce
code size.
Fixes for Bug 223564 and 245807
Updates to dirdeps.mk and meta2deps.py
Follow-up to r367323 by re-adding static to a number of the functions
copied from elftc's libelftc_vstr.c. This was requested by upstream.
PR: 250702
MFC after: 3 days
This updates the private copy of libelftc_dem_gnu3.c in libcxxrt with
the most recent version from upstream r3877. Similar to r367322, this
fixes a number of possible assertions, and allows it to correctly
demangle several names that it could not handle before.
PR: 250702
MFC after: 3 days
Incorporate fixes from Dimitry Andric:
- Use a BUFFER_GROW() macro to avoid rounding errors in capacity
calculations.
- Fix a bug introduced in [r3531].
- Fix handling of nested template parameters.
Ticket: #581
This should fix a number of assertions on elftoolchain's cxxfilt, and
allow it to correctly demangle several names that it could not handle
before.
Obtained from: https://sourceforge.net/p/elftoolchain/code/3877/
PR: 250702
MFC after: 3 days
