So that the caller can know the channel close error and react accordingly.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8600
So that the callers of vmbus_chan_open_br() could handle the passed in
bufring memory properly.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8569
vmbus_pcib requires NEW_PCIB, but in case that's not defined, we at
least shouldn't break build.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 3 days
Sponsored by: Microsoft
Queues that do not need interrupts - for instance, output queues - do
not have a corresponding entry in vtpci_msix_vq_interrupts.
So, it was wrong to increment a pointer into that array when iterating
over such a queue.
I ran into this bug while trying to use virtio_console(4) that allocates
a lot of queues with every other being an output queue without an
interrupt handler (if MultiplePorts feature is negotiated).
MFC after: 2 weeks
Zero can be confused for a potentially valid value.
For example, if I load and unload sbp driver I get a lot of messages
like the following:
fw_tl_free: the xfer is not in the queue (tlabel=0, flag=0x0)
send: dst=0x00 tl=0x00 rt=0 tcode=0x0 pri=0x0 src=0x000
recv: dst=0x01 tl=0x21 rt=1 tcode=0x1 pri=0x0 src=0xffc0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe04464407e0
fw_tl_free() at fw_tl_free+0x18d/frame 0xfffffe0446440820
fw_xfer_unload() at fw_xfer_unload+0xca/frame 0xfffffe0446440840
fw_xferlist_remove() at fw_xferlist_remove+0x2f/frame 0xfffffe0446440870
sbp_detach() at sbp_detach+0x1e0/frame 0xfffffe04464408e0
device_detach() at device_detach+0x80/frame 0xfffffe0446440900
devclass_driver_deleted() at devclass_driver_deleted+0x6a/frame 0xfffffe0446440940
devclass_delete_driver() at devclass_delete_driver+0x7d/frame 0xfffffe0446440980
driver_module_handler() at driver_module_handler+0xff/frame 0xfffffe04464409d0
module_unload() at module_unload+0x32/frame 0xfffffe04464409f0
linker_file_unload() at linker_file_unload+0x24b/frame 0xfffffe0446440a40
kern_kldunload() at kern_kldunload+0xbc/frame 0xfffffe0446440a70
amd64_syscall() at amd64_syscall+0x314/frame 0xfffffe0446440bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0446440bf0
MFC after: 2 weeks
Please see section 5.15 of 1394 OHCI Specification.
If the register is not implemented, then the physical response unit is
limited to the first 4GB of the physical memory.
In that case the non-cooperative debugging over firewire (using /dev/fwmem)
can not be expected to work if a target has more RAM than that.
The method is described in gdb.4 and the Developer's Handbook.
It seems that most of the consumer hardware does not implement
PhysicalUpperBound register.
MFC after: 1 week
Since hypervisor will not drain the TX bufring, once the channels are
revoked:
- Setup vmbus orphan handler properly.
- Make sure that suspension will not wait the TX bufring draining
forever.
- GC the pending TX descs on detach path, before freeing the busdma
stuffs.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8559
- Reference count the sub-channel when channel offer message is
processed, so that immediate rescind message on the same channel
will not race sub-channel open on driver side.
- Drop the above reference when sub-channel is closed, this closely
mimics the hypervisor's reaction when primary channel is closed
on the VM side. No drivers use sub-channel after primary channel
is closed.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8546
Drivers can now use vmbus_chan_{is_revoked,set_orphan,unset_orphan}() and
vmbus_xact_ctx_orphan() to fix their attach/detach DEVMETHODs for revoked
primary channels.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8545
It will be used to fix the primary channel revocation support.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8525
These functions are only used by management stuffs, so there are
no needs to introduce extra complexity.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8524
This will be used to fix device detach DEVMETHOD for revoked primary
channel.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8522
Minimal impact, would allow selection of LR media when KR is connected.
Reported by: Coverity
Approved by: davidch
MFC after: 7 days
Sponsored by: Broadcom Limited
* Obey the peer A-MPDU density if it's larger than the currently configured
one.
* Pay attention to the peer A-MPDU max-size and don't assume we can transmit
a full A-MPDU (64k!) if the peer announces smaller values.
Relnotes: ath(4): Fix A-MPDU transmit; obey A-MPDU density and max size.
This patch allows to specify PHY register offset for ukswitch. For instance,
switch MAICREL KS8995XA connected via MDIO to SoC, but PHY register starts
at 1. So hint for this case is: hint.ukswitch.0.phyoffset=1
No change/effect if hint is not set.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8584
FDT attachment to a new file. A separate ACPI attachment will then be added
to allow arm64 servers with ACPI to use it over FDT.
This should also help with merging this with the ofwpci driver, with
further work needed to remove restrictions this driver places on resource
allocation.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7319
uart we need to handle both it and FDT, and as such we need to have an
architecture specific driver.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7796
Just in case, the # of TX/RX rings is changed upon synthetic parts
re-attach.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8520
And re-enable SIOCADDMULTI/SIOCDELMULTI, after WITNESS warning is fixed.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8489
Currently, it is only applied to packet sent through chimney sending
buffers. Not enabled by default yet.
This one gives 20%~30% performance boost for non-TSO usage in both
bit/packet rate tests and nginx performance test.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8560
- Do not set input flag when reading value from GPIO pin, it is not
required and for gpioc2(S5 bank) setting both input and output flags
leads to some kind of electric interference (curren drop?) that
causes USB devices to disconnect
- Check pad configuration when attaching device and provide IN/OUT
capabilities only for pads that are configured as GPIO. Do not let
user code to configure or change value of non-GPIO pads. There is
no information for NC bank in intel's datasheet so for now function
check is ignored for pins in it
Reported by: Frank H.
MFC after: 3 days
- The Tx power (diff) values should be signed
- Fix an off by one error when reading Tx power (diff) values
Reviewed by: avos, adrian
Differential Revision: https://reviews.freebsd.org/D8571
Because link state change events aren't enabled until the end of init(),
the initial link up event could be missed. Check the current media status
immediately after enabling the default completion ring interrupt.
Approved by: sbruno
MFC after: 12 days
Sponsored by: Broadcom Limited
