Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
Document the existing alias definitions, and augment the example with
one of these. Also, describe the purpose of the newly added _FLAGS
variations of these command definitions.
Make some small style improvements to appease mandoc -Tlint.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35664
After some discussion, for now, simply revert the change to split
the driver up into if_rtw88_core.ko and if_rtw88_pci.ko as we do
not have an if_rtw88.ko anymore. We do have code trying to
auto-load modules, e.g. ifconfig, based on if_xxx.ko.
We could, based on Makefile magic or further code, generate a
if_rtw88.ko module with proper dependencies and keep this but for
simplicity stay with the one slightly larger module for now.
Should code appear to do this "properly" we can revisit this once
USB support has landed.
Slightly update the module Makefile to keep the separation of files
between core and pci bits visible and maintainable for the future.
This reverts commit 0f7b9777f8.
Based on an email mhorne@ sent to arch@.
Reviewed by: debdrup, pauamma_gundo.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34565
Now that -m32 is fixed, just install libs in ${WORLDTMP}/lib/lib32
and use the installed headers.
Reviewed by: imp, jhb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D34697
The Hardware currently doesn't support TSO feature and it can be
misleading to mention that in the docs.
All references to the docs were removed from the man pages.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Also, update the BUGS section. The example describes an issue, which is
not true anymore thanks to sysctl_lastload. Point readers to rcorder(8)
instead.
MFC after: 2 weeks
OpenVPN Data Channel Offload (DCO) moves OpenVPN data plane processing
(i.e. tunneling and cryptography) into the kernel, rather than using tap
devices.
This avoids significant copying and context switching overhead between
kernel and user space and improves OpenVPN throughput.
In my test setup throughput improved from around 660Mbit/s to around
2Gbit/s.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34340
The macOS linker does not support -zrelro/-znorelro. Since it is only
used to for build tools that run on the host, and WITH_RELRO or
WITHOUT_RELRO does not matter there, just skip the option.
Reviewed by: markj
Fixes: 2f3a961487 ("Add RELRO build knob, default to enabled")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35589
Move pytest wrapper to the collection of the other atf wrappers
in libexec. It solves the problem of combining bits & pieces from
bsd.test.mk and bgs.prog.mk to address "test binary, but not the
suite binary".
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D35604
MFC after: 2 weeks
Implementation consists of the pytest plugin implementing ATF format and
a simple C++ wrapper, which reorders the provided arguments from ATF format
to the format understandable by pytest. Each test has this wrapper specified
after the shebang. When kyua executes the test, wrapper calls pytest, which
loads atf plugin, does the work and returns the result. Additionally, a
separate python "package", `/usr/tests/atf_python` has been added to collect
code that may be useful across different tests.
Current limitations:
* Opaque metadata passing via X-Name properties. Require some fixtures to write
* `-s srcdir` parameter passed by the runner is ignored.
* No `atf-c-api(3)` or similar - relying on pytest framework & existing python libraries
* No support for `atf_tc_<get|has>_config_var()` & `atf_tc_set_md_var()`.
Can be probably implemented with env variables & autoload fixtures
Differential Revision: https://reviews.freebsd.org/D31084
Reviewed by: kp, ngie
A one-to-many unix/dgram socket is a socket that has been bound
with bind(2) and can get multiple connections. A typical example
is /var/run/log bound by syslogd(8) and receiving multiple
connections from libc syslog(3) API. Until now all of these
connections shared the same receive socket buffer of the bound
socket. This made the socket vulnerable to overflow attack.
See 240d5a9b1c for a historical attempt to workaround the problem.
This commit creates a per-connection socket buffer for every single
connected socket and eliminates the problem. The new behavior will
optimize seldom writers over frequent writers. See added test case
scenarios and code comments for more detailed description of the
new behavior.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35303
Note that lld enables relro by default, so that we already had either
partial or full RELRO, depending on the state of the BIND_NOW knob.
Add a RELRO knob so that the option can be disabled if desired, and so
that builds using the GNU toolchain are equivalent to those using the
standard Clang/LLVM toolchain.
Reviewed by: markj
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35545
Along with the snd_sb8 and snd_sb16 drivers. They supported ISA
Creative Sound Blaster and compatible sound cards.
Note that isa/sb.h is not removed, as it is still used by some PCI
sound card drivers.
ISA sound card drivers are deprecated as discussed on the current[1] and
stable[2] mailing lists. Deprecation notices were added in e39ec8933b
and MFCd to stable branches.
Driver removals are being committed individually so that specific
drivers can be restored if necessary (either in FreeBSD or by downstream
projects).
[1] https://lists.freebsd.org/archives/freebsd-current/2022-March/001680.html
[2] https://lists.freebsd.org/archives/freebsd-stable/2022-March/000585.html
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
Document the RB_AUGMENT macro, and provide an example of its use.
Reviewed by: alc, kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D35518
The current situation is fairly confusing, where an integer is interpreted
as a percent until you slap a decimal on it and magically it becomes an
absolute value.
Let's have a flag day in 14.0 and remove this shim entirely. Setting with
percent can still be useful, so allow a trailing '%' to indicate as such.
As a side effect, we tighten down the format allowed in the volume a little
bit by ensuring there's no trailing garbage after the value once it's
separated into left and right components.
Reviewed by: christos, hselasky, pauamma_gundo.com (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D35101
Split the driver up into two modules (if_rtw88_pci.ko and rtw88_core.ko).
This is in preparation for the hopefully eventually upcoming USB support
using the same driver core.
Note: this changes the module name to load to if_rtw88_pci.ko instead of
if_rtw88.ko. If using devmatch(8) everything should stay the same as
the driver name (used for net.wlan.devices) stays rtw88. If using
kld_list in rc.conf or loader.conf you will need to adjust the name.
Update man page for this.
MFC after: 3 days
A rarely occurring event (e.g. an event that occurs less than 1000
times during execution of a program) may require a lower minimum
threshold than 1000. Replace the hardcoded 1000 with a sysctl that
the administrator can use to permit smaller sampling count values.
Reviewed by: mhorne, mav
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D35400
Debug data is enabled via `makeoptions DEBUG=-g` in the kernel config
file (e.g. GENERIC).
If debug data is enabled and WITHOUT_KERNEL_SYMBOLS is set then debug
data is included in the kernel and module files.
PR: 264433
Discussed with: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Add list of supported names to iwlwifi.4 and an extended list with
PCI IDs and firmware prefix to iwlwififw.4.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35227
If one boots up multiple copies of a template VM image containing a
zpool, the pool GUIDs will be identical, making it impossible to, e.g.,
share datasets between them.
This diff introduces a simple workaround for the problem: one can use
the script to, upon first boot, assign a new GUID to one or more zpools.
This will be useful when building ZFS-based VM images from release(7).
Reviewed by: mav, allanjude, asomers
Reviewed by: Pau Amma (docs)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35336
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
The += for unique assignments is equivalent to =. Make these confusing
assignments simply assignments.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35242
Kthread worker is a single thread workqueue which can be used in cases
where specific kthread association is necessary, for example, when it
should have RT priority or be assigned to certain cgroup.
This change implements Linux v4.9 interface which mostly hides kthread
internals from users thus allowing to use ordinary taskqueue(9) KPI.
As kthread worker prohibits enqueueing of already pending or canceling
tasks some minimal changes to taskqueue(9) were done.
taskqueue_enqueue_flags() was added to taskqueue KPI which accepts extra
flags parameter. It contains one or more of the following flags:
TASKQUEUE_FAIL_IF_PENDING - taskqueue_enqueue_flags() fails if the task
is already scheduled to execution. EEXIST is returned and the
ta_pending counter value remains unchanged.
TASKQUEUE_FAIL_IF_CANCELING - taskqueue_enqueue_flags() fails if the
task is in the canceling state and ECANCELED is returned.
Required by: drm-kmod 5.10
MFC after: 1 week
Reviewed by: hselasky, Pau Amma (docs)
Differential Revision: https://reviews.freebsd.org/D35051
In some build configurations a warning about (an absolute path for)
-fuse-ld= not being supported by GCC was emitted during cleandir or
other non-build make targets.
For these non-build targets COMPILER_TYPE is set to "none" but we
treated the .else case for COMPILER_TYPE==clang as implying gcc.
Check instead for COMPILER_TYPE==gcc.
PR: 263913
Reported by: pstef
Reviewed by: pstef
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Linux has more tolerant checks of the user supplied cpuset_t's.
Minimum cpuset_t size that the Linux kernel permits in case of
getaffinity() is the maximum CPU id, present in the system / NBBY,
the maximum size is not limited.
For setaffinity(), Linux does not limit the size of the user-provided
cpuset_t, internally using only the meaningful part of the set, where
the upper bound is the maximum CPU id, present in the system, no larger
than the size of the kernel cpuset_t.
Unlike FreeBSD, Linux ignores high bits if set in the setaffinity(),
so clear it in the sched_setaffinity() and Linuxulator itself.
Reviewed by: Pau Amma (man pages)
In collaboration with: jhb
Differential revision: https://reviews.freebsd.org/D34849
MFC after: 2 weeks
Mention the loader tunable from 6a50157090
that needs to be set for system with more than 4GB of physical memory.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Retrieve FreeBSD revision number directly from sys/conf/newvers.sh
when building the compiler target triple value, avoiding manual
intervention on other files every new release.
Reviewed by: imp
MFC after: 2 months
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D34429
src.conf(5) previously stated they would be removed before FreeBSD 12.0,
but that did not happen. Change it to "a future version of FreeBSD."
Also pick up LOADER_KBOOT change (enabled on x86) in src.conf regen.
Reported by: jhb
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This fixes incomplete commit 2e547442ab
New sysctl allows to mark transmitted PPPoE LCP Control
ethernet frames with needed 3-bit Priority Code Point (PCP) value.
Confirming driver like if_vlan(4) uses the value to fill
IEEE 802.1p class of service field.
This is similar to Cisco IOS "control-packets vlan cos priority"
command.
It helps to avoid premature disconnection of user sessions
due to control frame drops (LCP Echo etc.)
if network infrastructure has a botteleck at a switch
or the xdsl DSLAM.
See also:
https://sourceforge.net/p/mpd/discussion/44692/thread/c7abe70e3a/
Tested by: Klaus Fokuhl at SourceForge
MFC after: 2 weeks
Get amd64 compiling. However, the current kboot supports an old way of
enumerating memory and the new way needs to be incorporated as well. The
powerpc folks could use either, it seems and newer powerpc platforms
need some changes for kboot to work anyway.
This commit includes the linker script, trampoline code to start the new
kernel, Linux system calls and the necessary configuration glue needed
to build the binaries.
This includes a quick hack to get multiboot support, but we need to
really share these defines. The multiiboot2.h is the minimum needed to
build. We have multiboot information in three places now, so a
refactoring is in order.
This should be considered, at best, preliminary and experimental for
anybody wishing to try it out.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35100
New sysctl allows to mark transmitted PPPoE LCP Control
ethernet frames with needed 3-bit Priority Code Point (PCP) value.
Confirming driver like if_vlan(4) uses the value to fill
IEEE 802.1p class of service field.
This is similar to Cisco IOS "control-packets vlan cos priority"
command.
It helps to avoid premature disconnection of user sessions
due to control frame drops (LCP Echo etc.)
if network infrastructure has a botteleck at a switch
or the xdsl DSLAM.
See also:
https://sourceforge.net/p/mpd/discussion/44692/thread/c7abe70e3a/
Tested by: Klaus Fokuhl at SourceForge
MFC after: 2 weeks
Latest dirdeps.mk is far more efficient when generating
DIRDEPS_CACHE.
Update dirdeps-options.mk to allow DEP_RELDIR to factor
into option processing. This is not very interesting if all
options are global.
Provide a very brief introduction to capabilities, using a couple of
sentences from David Chisnall's mailing list response[1] to a question
about Linux capabilities and Capsicum.
Mailing list subject (in case the archive URL changes) was
Re: Linux capabilities to Capsicum
[1] https://lists.freebsd.org/archives/freebsd-hackers/2022-April/001032.html
Reviewed by: oshogbo
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34945
This argument is useless for the vast majority of drivers. For now,
use __VA_ARGS__ wrapper macros so that that the *DRIVER_MODULE()
macros accept both the old version (with a devclass) and the new
version (which omits the argument and stores NULL in the
driver_module_data structure). This provides an API compatiblity
shim that can be merged to older stable branches.
Once all drivers relevant to 14.0 (both in and out of tree) have been
updated, the API compat shims can be dropped.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34963
These can be used in place of the CTRn() macros which require n to match
the number of optional arguments.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34852
French national organization for standardization as "NF Z71‐300"
PR: 160227
Approved by: emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D34886
Replace the old snd_bwnd field which was kept for compatibility with the
t_flags2 field from the tcpcb. This exposes in siftr logs interesting
things such as ECN, PLPMTUD, Accurate ECN and if first bytes are
complete.
Reviewed by: rscheff (transport), chengc_netapp.com, debdrup (manpages)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #73
Differential Revision: https://reviews.freebsd.org/D34672
It supports only the obsolete SMBv1 protocol, is known to be buggy, and
likely has security vulnerabilities. It will either be updated or
removed in the future, but for now at least describe the current state
in the man page.
PR: 263043
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Add three hooks to the livedump process: before, after, and for each
block of dumped data. This allows, for example, quiescing the system
before the dump begins or protecting data of interest to ensure its
consistency in the final output.
Reviewed by: markj, kib (previous version)
Reviewed by: debdrup (manpages)
Reviewed by: Pau Amma <pauamma@gundo.com> (manpages)
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34067
This dumper can instantiate and write the dump's contents to a
file-backed vnode.
Unlike existing disk or network dumpers, the vnode dumper should not be
invoked during a system panic, and therefore is not added to the global
dumper_configs list. Instead, the vnode dumper is constructed ad-hoc
when a live dump is requested using the new ioctl on /dev/mem. This is
similar in spirit to a kgdb session against the live system via
/dev/mem.
As described briefly in the mem(4) man page, live dumps are not
guaranteed to result in a usuable output file, but offer some debugging
value where forcefully panicing a system to dump its memory is not
desirable/feasible.
A future change to savecore(8) will add an option to save a live dump.
Reviewed by: markj, Pau Amma <pauamma@gundo.com> (manpages)
Discussed with: kib
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D33813
Add the missing .El which fixes the indentation of the memory range
definitions and operation. Add subsection headings to further clarify
this section. Do the same for the RETURN VALUES section, and mention
explicitly that MEM_EXTRACT_PADDR always returns zero.
Reviewed by: markj, 0mp, Pau Amma <pauamma@gundo.com>
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34574
When the unicode locales files where split off the non unicode locales
be_BY.ISO8859-5 and ca_IT.ISO8859-15 where non installed one due to
a typo, the other one was just missing its entry in the Makefile.
It was only notice a year later, by some postgres developpers as it was
breaking some of their tests.
Reported by: tmunro
Remove the trailing backslash from the last list item. This is a NOP and
never bothered anything because the next line was a blank line. Remove
it for correctness sake.
MFC after: 3 days
Note that a console typewriter device /dev/tty
and asynchronous communication interfaces /dev/tty[0-5]
first appeared in Version 1 AT&T UNIX.
Obtained from: OpenBSD
MFC after: 1 week
Been some time since 364fe18b8c when the URL was first in this file.
Update from svnweb to cgit for the URL listed at the end of this file.
In addition, update all URLs to HTTPS. Replace two URLs with links to
archive.org as the original URLs are no longer valid.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34730
Add man pages for rtw88 and rtw88fw. Install a copy of the firmware
license file and hook up the driver and firmware modules to the build.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Relnotes: yes
Historically 32-bit Linuxulator under amd64 emulated the real i386
behavior. Since 3d8dd983 the old i386 Linux world can't be used under
amd64 Linuxulator as it don't know anything about amd64 machine (which
is returned now by newuname() syscall). So, add a knob to allow to swith
the behavior and use i386 Linux binaries on amd64.
Set knob to the new behavior as I think this is common to the modern
Linux distros.
Reviewed by: Pau Amma (doc), emaste
Differential revision: https://reviews.freebsd.org/D34708
MFC after: 2 weeks
The man page said dynamic allocation was required, but struct stack
can be allocated in any way, including on the stack. Make this clear,
and explain how to initialize the struct.
While I'm here, stack_save does not require any lock.
Reviewed by: markj, Pau Amma <pauamma_gundo.com>
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34461
ISA sound cards (and ISA itself) are long obsolete. NYCBUG dmesgd has
no entries for any of these devices after 2005.
Add deprecation notices to device attach routines and man pages for:
snd_ad1816 Analog Devices AD1816 SoundPort
snd_ess Ensoniq ESS
snd_gusc Gravis UltraSound
snd_mss Microsoft Sound System
snd_sbc Creative Sound Blaster
Reviewed by: cy, mav
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34604
These drivers are broken and have been scheduled for removal since 2012.
They will finally be removed before FreeBSD 14.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
There's too many broken hardware out there that wrongly has the
ACPI_FADT_NO_VGA bit set. Ignore it unless running as a virtualized
guest, as then the expectation would be that the hypervisor does
provide correct ACPI tables.
Reviewed by: emaste, 0mp, eugen
MFC: 3 days
Sponsored by: Citrix Systems R&D
PR: 230172
Differential revision: https://reviews.freebsd.org/D34392
/usr/freebsd-dist is used used by various programs as the location for
FreeBSD distribution files. In-tree programs following this convention
are bsdinstall(8) and release(7).
Reviewed by: Pau Amma <pauamma@gundo.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34552
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
The security/520-pfdenied script only reports blocked packets from the
main ruleset or any blocklistd(8) anchor.
Add an option to periodic.conf(5) to make it possible to specify
additional anchors to report.
PR: 262446
Reviewed by: kp
In order to support various types of data stored in device
tree properties or ACPI _DSD packages, create a new enum so
the caller can specify the expected type of a property they
want to read, according to the binding. The bus logic will use
that information to process the underlying data.
For example in DT all integer properties are stored in BE format.
In order to get constant results across different platforms we
need to convert its endianness to match the host.
Another example are ACPI_TYPE_INTEGER properties stored
as uint64_t. Before this patch the ACPI logic would refuse
to read them if the provided buffer was smaller than 8 bytes.
Now this can be handled by using DEVICE_PROP_UINT32 type.
Modify the existing consumers of this API to reflect the changes
and update the man pages accordingly.
Reviewed by: mw
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33457
Temperature is exposed via 'temperature' leaf, humidity via 'humidity'
leaf. Align the manual page with the actual variable names.
Approved by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34460
With the initial import of 386BSD 0.1 in 1993, the daily execution of
/etc/news.expire was introduced (see commit 1bf9d5d951).
In 1997, this was brought into periodic resulting in daily/330.news
(see commit 28dce04d19). But as far as I see, /etc/news.expire has
never existed.
PR: 256238
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30631
The new dev.netmap.max_bridges sysctl tunable can be set in
loader.conf(5) to change the default maximum number of VALE
switches that can be created. Current defaults is 8.
MFC after: 2 weeks
Update man pages given auto-loading is now enabled by default and
no user configuration is needed to load the driver.
Also note that the iwlwifi driver will appear the first time in 13.1-R.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Relnotes: yes
When filtering Ethernet packets allow rules to specify a mac address
with a mask. This indicates which bits of the specified address are
significant. This allows users to do things like filter based on device
manufacturer.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Document how 'ether' rules can be set, and what options they support.
Reviewed by: bcr
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31751
Define a place for sysroot trees to live. This assumes they come from
the base in some way, though there's not yet a build/install/etc sysroot
target. Include the FreeBSD version so multiple verrsions can be
installed on one system (it also includes the whole uname version, so
one could, in theory, install variants like CheriBSD or whatever on the
same system as FreeBSD). Use MACHINE.MACHINE_ARCH to be consistent with
the release practices, /usr/obj and other naming conventions.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33754
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
