smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
In some cases the pool discovery will get stuck in infinite loop while setting
up the vdev children.
To fix, we split the vdev setup into two parts, first we create vdevs based on
configuration we do get from pool label, then, we process pool config from MOS
and update the pool config if needed.
Testing done: confirm previously hung loader is not hung any more.
MFC after: 1 week
Instead of passing NULL to fzap_name_equal and crashing, just return
ENOENT. This happened when higher bits of a hash of the searched key
(its hash prefix) matched a hash prefix of some key in the ZAP, but the
full hash value of the searched key did not match any key in the ZAP.
I observerved this problem when loader tried to look up
"features_for_read" in a particular old pool that predates pool
features.
MFC after: 2 weeks
Sponsored by: Panzura
We do allocate amount of memory (void * or char *), and then assign this
buffer to struct iso_primary_descriptor *vd. Make sure we do
allocate enough bytes.
In fact we do allocate enough, but it is good idea to make sure this really
is so.
MFC after: 1 week
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
Include the server IP address when logging nfs_open(), add a few missing
"\n"s, and correct a typo.
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22346
In our case the structure is more complex and simple static initializer
will upset compiler diagnostics - using memset is still better than building
more complext initializer.
Since physical device asize is calculated from psize and the asize is stored
in pool label, we can use asize to set the value of psize, which is used to
calculate the location of the pool labels.
MFC after: 1 week
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
Add ficl words for isvirtualized
and move ficl inb and outb words to ficl/x86/sysdep.c
so can be shared by i386 and amd64
Reviewed by: imp bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22069
When zfs probe did fail and no spa was created, but zfs_fmtdev() is called,
we will crash while dereferencing spa (NULL pointer dereference).
MFC after: 1 week
Clean up libstand zalloc* sources. Note that it is not 100% whitespace cleanup.
I also reduced block in znalloc and zfree as those were obvious simplifications
and did help to save one level of indent.
This brings the libsa/mips _setjmp implementation closer to parity with the
libc version.
Reviewed by: imp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21330
ufsread.c grows a dependency on __ashldi3 with llvm90. For gptboot, just
start pulling in ashldi3.c ashrdi3.c lshrdi3.c into libsa for all archs as
the number of archs requiring one or more of them keeps growing. qdivrem.c
and quad.h can be trivially kicked out of libsa if we start pulling these
from compiler-rt as qdivrem was only used to implement umoddi3, divdi3,
moddi3 (also in qdivrem.c).
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21291
Other parts of stand/ that don't use libsa will need to grab bits from libc
shortly. Push LIBC_SRC up to defs.mk in advance of this so that they can use
it, and rename it to LIBCSRC to match the convention of the rest of the *SRC
variables in this file.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21282
Use quad.h from libc instead for the time being. This reduces the number of
nearly-identical-quad.h we have in tree to two with only minor changes.
Prototypes for some *sh*di3 have been added to match the copy in libkern.
The differences between the two are likely few enough that they can perhaps
be merged with little additional effort to bring us down to 1.
MFC after: 3 days
We should support removing vdev from boot pool. Update loader zfs reader
to support com.delphix:removing.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18901
Summary:
efi loader does not work with static network parameters. It always uses
BOOTP/DHCP and also uses RARP as a fallback. Problems with DHCP servers can
cause the loader to fail to populate network parameters.
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: imp
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D20811
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Add support for an HTTP "network filesystem" using the UEFI's HTTP
stack.
This also supports HTTPS, but TianoCore EDK2 implementations currently
crash while fetching loader files.
Only IPv4 is supported at the moment. IPv6 support is planned for a
follow-up changeset.
Note that we include some headers from the TianoCore EDK II project in
stand/efi/include/Protocol verbatim, including links to the license instead
of including the full text because that's their preferred way of
communicating it, despite not being normal FreeBSD project practice.
Submitted by: scottph
Reviewed by: imp, bcran
Differential Revision: https://reviews.freebsd.org/D20643
There are many new features in ZoF. Most, if not all, do not effect read only usage.
Encryption in particular is enabled at the pool level but used at the dataset level.
The loader obviously will not be able to boot if the boot dataset is encrypted, but
should not care if some other dataset in the root pool is encrypted.
Reviewed by: allanjude
MFC after: 1 week
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
