!defined(LIBRARIES_ONLY) so it is only created once on architectures
with 32-bit compat support.
Replace ln -fhs with ${INSTALL_SYMLINK} to the link is logged in the
METALOG.
/usr/lib/include ==> /usr/include
This fixes -print-file-name=include in clang (and is
arguably a better way to fix the same issue in GCC than
the change I made in r231336).
MFC after: 1 week
LibYAML is a YAML 1.1 parser and emitter under MIT license which will
soon be used by the pkg boostrap (usr.bin/pkg) and bhyve
Reviewed by: roberto, antoine
set of NetBSD software to compile as part of the FreeBSD build with
little or no modifiction. It is built as a static library and not
installed for general use. Likewise, its header files are not
installed.
Sponsored by: DARPA, AFRL
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
This library implements the C11 threads interface on top of the pthreads
library. As discussed on the lists, the preferred way to implement
this, is as a separate library.
It is unlikely that these functions will be used a lot in the future. It
would have been easier if the C11 working group standardized (a subset
of) pthreads and clock_nanosleep(). Having it as a separate library
allows the embedded people to omit it from their system.
Discussed on: arch@, threads@
not disabled in the usual way (by adding it to __DEFAULT_NO_OPTIONS in
share/mk/bsd.own.mk), and because the test for MK_LIBCPLUSPLUS in
Makefile.inc1 was incorrect.
Pointy hat to: dim
MK_LIBCPLUSPLUS=yes to enable). This is a work-in-progress. It works for
me, but is not guaranteed to work for anyone else and may eat your dog.
To build C++ using libc++, add -stdlib=libc++ to your CXX and LD flags.
Bug reports welcome, bug fixes even more welcome...
Approved by: dim (mentor)
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface
bhyve was designed and implemented by Neel Natu.
Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski
file and processes information retrieval from the running kernel via sysctl
in the form of new library, libprocstat. The library also supports KVM backend
for analyzing memory crash dumps. Both procstat(1) and fstat(1) utilities have
been modified to take advantage of the library (as the bonus point the fstat(1)
utility no longer need superuser privileges to operate), and the procstat(1)
utility is now able to display information from memory dumps as well.
The newly introduced fuser(1) utility also uses this library and able to operate
via sysctl and kvm backends.
The library is by no means complete (e.g. KVM backend is missing vnode name
resolution routines, and there're no manpages for the library itself) so I
plan to improve it further. I'm commiting it so it will get wider exposure
and review.
We won't be able to MFC this work as it relies on changes in HEAD, which
was introduced some time ago, that break kernel ABI. OTOH we may be able
to merge the library with KVM backend if we really need it there.
Discussed with: rwatson
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
libcompiler_rt.a is a BSD licensed C language runtime, which implements
many routines which are linked into binaries on architectures where
certain functionality is missing (e.g. 64 bits mul/div on i386).
Unfortunately, libcompiler_rt cannot replace libgcc entirely. Certain
features, such as an unwinder for exception handling, are missing.
That's why only libgcc.a is replaced for now, because this one does seem
to be complete.
Tested by: rene (amd64), nwhitehorn (powerpc), droso (i386 exprun)
and many others. Thanks!
Obtained from: user/ed/compiler-rt
MFC r207842:
Import of liblzma, xz, xzdec, lzmainfo from vendor branch
Add support for xz and lzma to lesspipe.sh (xzless, lzless)
MFC r207844:
Add two public headers missing in r207842
Adjust CFLAGS for lzmainfo, xz, xzdec
MFC r208099:
Add versioned symbols to liblzma
Use default SHLIB_MAJOR.
Approved by: delphij (mentor)
MFC r204738:
Remove stale references to libkrb5.
Rejigger the SUBDIR setting a smidge: we now set all the libraries that depend
on something else, and then SUBDIR+= the rest.
MFC r205113:
Make this conform to the other top-level Makefile subdir listings with
one file per line.
Approved by: delphij (mentor)
- Rework the wrapper support to check libpkg version as well as pkg_install
version.
- Add libfetch to _prebuild_libs.
- There are no new features introduced.
Notes: the API is not stable, so basically, do not use libpkg in your
projects for now. Also there's no manpage for libpkg yet, because the API
will change drastically. I repeat, do not use libpkg for now.
Rejigger the SUBDIR setting a smidge: we now set all the libraries that depend
on something else, and then SUBDIR+= the rest.
A separate commit will fix the SUBDIR style to be the same as the rest
of the tree.
framebuffer driver, etc. work on FreeBSD/amd64.
A significant amount of improvements were done by jkim@ during the recent
months to make vesa(4) work better, over the initial code import. This
work is based on OpenBSD's x86emu implementation and contributed by
paradox <ddkprog yahoo com> and swell.k at gmail com.
Hopefully I have stolen all their work to 8-STABLE :)
All bugs in this commit are mine, as usual.
This first commit brings 3 functions for enumerating, retrieving,
adding, removing and modifying EFI variables. The immediate use of these
include the insertion of a new boot option as part of the installation
process.
This library uses ioctl(2) requests implemented by io(4) to pass the
requests down through the kernel to EFI. These ioctl requests are only
implemented on ia64, so libefi is currently only enabled on ia64. The
interface is generic and io(4) on mad64/i386 can easily be taught to
handle these once EFI support has been added to the kernel there.
libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
The information used by the "Last login:"-line is obtained by using
ulog_setutxfile(3) to switch to the lastlog database. Login and logout
are performed using the utility functions ulog_login(3) and
ulog_logout(3).
This also means we must build libulog during bootstrap.
Approved by: des
One of the things I really want to do, is to get rid of the limitations
of our current utmp(5) mechanism:
- It only allows 8 byte TTY device names.
- The hostname only allows 16 bytes of storage.
I'm not a big fan of <utmpx.h>, but I think we should at least try to
add parts of it. Unfortunately we cannot implement <utmpx.h>, because we
miss various fields, such as ut_id, ut_pid, etc. The API provided by
libulog shares some similarities with <utmpx.h>, so it shouldn't be too
hard to port these applications eventually. In most simple cases, it
should just be a matter of removing the ulog_ prefix everywhere.
As a bonus, it also implements a function called ulog_login_pseudo(),
which allows unprivileged applications to write log entries, provided
they have a valid file descriptor to a pseudo-terminal master device.
libulog will allow a smoother transition to a new file format by adding
a library interface to deal with utmp/wtmp/lastlog files. I initially
thought about adding the functionality to libutil, but because I'm not
planning on keeping this library around forever, we'd better keep it
separated.
Next items on the todo list:
1. Port applications in the base system (and ports) to libulog, instead
of letting them use <utmp.h>.
2. Remove <utmp.h>, implement <utmpx.h> and reimplement this library on
top.
3. Port as many applications as possible back to <utmpx.h>.
- Add vesa kernel options for amd64.
- Connect libvgl library and splash kernel modules to amd64 build.
- Connect manual page dpms(4) to amd64 build.
- Remove old vesa/dpms files.
Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com
(with some minor tweaks)
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.
Sponsored by: Isilon Systems
Reviewed by: alfred
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
default to the value of MK_KERBEROS unless set explicitly by
WITH_GSSAPI/WITHOUT_GSSAPI. (This introduces another type of
MK_* variables which itself is questionable.)
- Teach tools/build/options/makeman script that generates the
src.conf(5) manpage about the new type of MK_* variables.
- Fix broken logic in lib/Makefile.
WITHOUT_KERBEROS knob. While GSS can be used for other things
some third party software (most notably ports/x11/kdelibs3)
takes the presence of libgssapi as an indication that kerberos
is available, and attempts to link with the kerberos libs. If
they are not available, the build will fail.
Because you might want to use GSS but not kerberos, add a knob
to re-enable it if WITHOUT_KERBEROS is present.
Document the new knob, and the new behavior of WITHOUT_KERBEROS.
Not objected and/or generally agreed to by: freebsd-arch
Problem discussed/analyzed in:
PR: ports/116484
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
similar the the Solaris implementation. Repackage the krb5 GSS mechanism
as a plugin library for the new implementation. This also includes a
comprehensive set of manpages for the GSS-API functions with text mostly
taken from the RFC.
Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
Main ones: mostly use conditional expressions in ifdefs instead of a
mixture of conditional expressions and nested ifdefs.
Nearby ones:
- don't do less than echo the code in the comment about libc_r
- fixed some internal insertion sort errors and indentation errors.
on that platform, invert the test for the platforms on
which libthr is built. Amd64 and powerpc are the only
platforms excluded.
Compile tested on: amd64, alpha
Previously, there were two copies of telnet; a non-crypto version
that lived in the usual places, and a crypto version that lived in
crypto/telnet/. The latter was built in a broken manner somewhat akin
to other "contribified" sources. This meant that there were 4 telnets
competing with each other at build time - KerberosIV, Kerberos5,
plain-old-secure and base. KerberosIV is no longer in the running, but
the other three took it in turns to jump all over each other during a
"make buildworld".
As the crypto issue has been clarified, and crypto _calls_ are not
a problem, crypto/telnet has been repo-copied to contrib/telnet,
and with this commit, all telnets are now "contribified". The contrib
path was chosen to not destroy history in the repository, and differs
from other contrib/ entries in that it may be worked on as "normal"
BSD code. There is no dangerous crypto in these sources, only a
very weak system less strong than enigma(1).
Kerberos5 telnet and Secure telnet are now selected by using the usual
macros in /etc/make.conf, and the build process is unsurprising and
less treacherous.
obsolete. The intend is to add glue to either libthr or
libpthread to create the necessary compat links.
o Hook libpthread to the build on ia64. This is slightly out of
order, because the kernel still doesn't have all the support,
but that's not a problem in this case.
because we have 2 stacks per thread: the regular downward
memory stack and the irregular upward register stack. This
implementation lets both stacks grow toward each other. An
alternative scheme is to have them grow away from each other.
The alternate scheme has the advantage that both stack grow
toward guard pages. Since libc_r is virtually dead and we
really want the *context stuff for thread switching, we don't
try to be perfect, just functional.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
the build. It is here to compartmentalise functionality currently duplicated
in many notable programs in the base system. It currently handles block
reads and writes, as well as reading and writing of the filesystem superblock,
and the reading/lookup of inode data. It supports both UFS and UFS2. I
will be maintaining it, and porting programs to use it, however for now, it
is simply being built as part of world.
replaced with the new version in sendmail's distribution, vacation and
the necessary libraries (libsmdb and libsmutil) were changed so they
were always compiled. This broke people who didn't checkout
src/contrib/sendmail/. I don't know if it's best to think of NO_SENDMAIL
as no sendmail sources available or no sendmail binary. It is now the former.
Also, remove the sendmail chapter from System Managers Manual (SMM) if
NO_SENDMAIL is defined (for similar reasons -- source not available).
PR: 31863, 31865
Submitted by: matusita, Joe Kelsey <joe@zircon.seattle.wa.us>
MFC after: 3 days
and/or libgnumalloc on anything but i386. The other platforms
post-date this mistake.
Do not build libc_r for ia64. There are some fundamental issues that
need to be resolved (ie: it cannot use setjmp/longjmp for thread
switching, which isn't likely to be fixed soon. libc_r has to be
reimplemented using something like makecontext()/swapcontext() etc
in order to work in ia64.)
1.) prefix all functions in the library with devstat_ (compatability
functions are available for all functions that were chaned in an
incompatible way, but are deprecated).
2.) Add a pointer to a kvm_t as the first argument to functions that
used to get their information via sysctl; they behave the same
as before when NULL is passed as this argument, otherwise, the
information is obtained via libkvm using the supplied handle.
3.) Add a new function, devstat_compute_statistics(), that is intended
to replace the old compute_stats() function. It offers more
statistics data, and has a more flexible interface.
libdevstat does now require libkvm; a library depedency is added, so
that libkvm only needs to be explicitely specified for statically linked
programs.
The library major version number is bumped.
Submitted by: Sergey A. Osokin <osa@freebsd.org.ru>, ken (3)
Reviewed by: ken
crypto bits installed and/or NOCRYPTO/NO_OPENSSL is defined. This unfortunately
meants that usr.bin/chkey, usr.bin/newkey and usr.sbin/keyserv have also to
be disconnected.
IMO it is merely a workaround, the proper solution is to move libmp to
src/crypto where it belongs and use libgmp for the cryptoless builds instead.
Missed by: dd
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
one-way hash functions for authentication purposes. There is no more
"set the libcrypt->libXXXcrypt" nightmare.
- Undo the libmd.so hack, use -D to hide the md5c.c internals.
- Remove the symlink hacks in release/Makefile
- the algorthm is set by set_crypt_format() as before. If this is
not called, it tries to heuristically figure out the hash format, and
if all else fails, it uses the optional auth.conf entry to chose the
overall default hash.
- Since source has non-hidden crypto in it there may be some issues with
having the source it in some countries, so preserve the "secure/*"
division. You can still build a des-free libcrypt library if you want
to badly enough. This should not be a problem in the US or exporting
from the US as freebsd.org had notified BXA some time ago. That makes
this stuff re-exportable by anyone.
- For consistancy, the default in absence of any other clues is md5. This
is to try and minimize POLA across buildworld where folk may suddenly
be activating des-crypt()-hash support. Since the des hash may not
always be present, it seemed sensible to make the stronger md5 algorithm
the default.
All things being equal, no functionality is lost.
Reviewed-by: jkh
(flame-proof suit on)
bind distribution, but until now was not being built as a separate
entity. For documentation, see these man pages:
assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3).
Reviewed by: jdp
compatible with the old version but includes new functionality and bug fixes.
Since it is not part of the NO_SENDMAIL make.conf option, libsmdb and
libsmutil should always be built for vacation's sake.
PR: 15227
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
maintained, and has been replaced by msun. The libm sources
shouldn't be removed just yet as there are parts that should be
merged into msun first.
PR: misc/17848
Discussed with: phk & bde
libcrypt and libutil was not built before libpam.
The order here is currently unimportant, but ../Makefile should
descend here to build everything (which currently doesn't work
right) or at least to get the order using `make -V SUBDIR'.
Fixed bitrot in comments about library dependencies. The list has been
maintained better in ../Makefile.inc1, except it has been uninverted
there so it is hard to use manually.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
