Commit Graph

17 Commits

Author SHA1 Message Date
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Alexander Motin
9d75ca28f0 Do not DELAY() for P-state transition unless we want to see the result.
Intel manual says: "If a transition is already in progress, transition to
a new value will subsequently take effect. Reads of IA32_PERF_CTL determine
the last targeted operating point."  So seems it should be fine to just
trigger wanted transition and go.  Linux does the same.

MFC after:	1 month
2013-12-10 20:25:43 +00:00
Sean Bruno
ded71d6788 Fix powerd/states on AMD cpus. Resolves issues with system reporting:
hwpstate0: set freq failed, err 6

Tested on FX-8150 and others.

PR:		167018
Submitted by:	avg
MFC after:	2 weeks
2013-11-06 23:29:25 +00:00
Hiren Panchasara
46b29ff94a Adding a detach method to p4tcc driver.
PR:	118739
Submitted by:	Dan Lukes <dan@obluda.cz> (earlier version)
Reviewed by:	jhb
Approved by:	sbruno (mentor)
MFC after:	1 week
2013-05-10 22:43:27 +00:00
Eitan Adler
a8de37b024 This isn't functionally identical. In some cases a hint to disable
unit 0 would in fact disable all units.

This reverts r241856

Approved by: cperciva (implicit)
2012-10-22 13:06:09 +00:00
Eitan Adler
76b7512247 Now that device disabling is generic, remove extraneous code from the
device drivers that used to provide this feature.

Reviewed by:	des
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:41:14 +00:00
Alexander Kabaev
2f42a9bf0d Fix apparent logic reversal in setting the 'auto_mode' flag.
MFC after: 2 weeks
2012-02-26 21:24:27 +00:00
Jung-uk Kim
43d645f96b Use ACPI-supplied CPU frequencies instead of estimated ones as we are about
to use other values from the same table anyway.

MFC after:	3 days
2011-04-27 00:32:35 +00:00
Jung-uk Kim
3453537fa5 Use atomic load & store for TSC frequency. It may be overkill for amd64 but
safer for i386 because it can be easily over 4 GHz now.  More worse, it can
be easily changed by user with 'machdep.tsc_freq' tunable (directly) or
cpufreq(4) (indirectly).  Note it is intentionally not used in performance
critical paths to avoid performance regression (but we should, in theory).
Alternatively, we may add "virtual TSC" with lower frequency if maximum
frequency overflows 32 bits (and ignore possible incoherency as we do now).
2011-04-07 23:28:28 +00:00
Jung-uk Kim
49abdda9b7 Set C1 "I/O then Halt" capability bit for Intel EIST. Some broken BIOSes
refuse to load external SSDTs if this bit is unset for _PDC.  It seems Linux
and OpenSolaris did the same long ago.

MFC after:	1 week
2011-02-25 23:14:24 +00:00
Andriy Gapon
40934baa60 hwpstate: use CPU_FOREACH when binding to all available processors
Also, add a comment mentioning _PSD - on some systems it's enough to
put one logical CPU into a particular P-state to make other CPUs in
the same domain to enter that P-state.

Also, call sched_unbind() after the loop - sched_bind() automatically
rebinds from previous CPU to a new one, and the new arrangement of code
is safer against early loop exit.

Plus one minor style nit.

MFC after:	10 days
2010-11-16 12:43:45 +00:00
Andriy Gapon
b3fa872420 make it possible to actually enable hwpstate_verbose
Either via the tunable or the sysctl.

MFC after:	3 days
2010-11-11 17:30:49 +00:00
Alexander Motin
c59528330a Few whitespace cleanups and comments tunings.
Submitted by:	arundel
2010-09-16 02:59:25 +00:00
Alexander Motin
5ec55931d6 Core i5, same as previously Core2Duo, found to not set P-state for single
core lower then set on other cores. Do not try to test P-states on attach
on SMP systems. It is hopeless now and will just pollute verbose logs.
If needed, check still can be forced via loader tunable.
2010-06-19 13:09:42 +00:00
Attilio Rao
3258030144 Introduce the new kernel sub-tree x86 which should contain all the code
shared and generalized between our current amd64, i386 and pc98.

This is just an initial step that should lead to a more complete effort.
For the moment, a very simple porting of cpufreq modules, BIOS calls and
the whole MD specific ISA bus part is added to the sub-tree but ideally
a lot of code might be added and more shared support should grow.

Sponsored by:	Sandvine Incorporated
Reviewed by:	emaste, kib, jhb, imp
Discussed on:	arch
MFC:		3 weeks
2010-02-25 14:13:39 +00:00