FreeBSD. SIFTR logs a range of statistics on active TCP connections to a log
file, providing the ability to make highly granular measurements of TCP
connection state. The tool is aimed at system administrators, developers and
researchers alike. Please take it for a spin and test it out - the man page
should have all the information required to get you going.
Many thanks go to the Cisco University Research Program Fund at Community
Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work
at the Centre for Advanced Internet Architectures, Swinburne University of
Technology is greatly appreciated.
Sponsored by: Cisco URP, FreeBSD Foundation
Reviewed by: dwmalone, gnn, rpaulo
Tested by: Many on freebsd-current@ and elsewhere over the years
MFC after: 1 month
expansion.
The comma operator is not listed in POSIX.1-2008 XCU 1.1.2.1 Arithmetic
Precision and Operations (referenced by XCU 2.6.4 Arithmetic Expansion) and
is therefore not required.
If we save/restore the PageMask, the value set by the bootloader will
persist, and will cause problems later in TLB exception handler.
This caused a crash in AR71xx boards.
Also fixes the EntryHi mask in pte.h
Reported by: Luiz Otavio O Souza <lists.br@gmail.com>
Tested by: Luiz Otavio O Souza <lists.br@gmail.com>
Approved by: rrs (mentor)
a read-lock is being called to check the vtag-timewait cache.
Then in two cases (where a vtag is bad i.e. in the time-wait
state) the write-unlock is called NOT the read-unlock. Under
conditions where lots of associations are coming and going
this will cause the system to panic at some point.
MFC after: 3 days
once, even if authentication is required, instead of retrying with the
proper credentials. Fix this by bumping the countdown if the origin or
proxy server requests authentication so that the initial unauthenticated
request does not count as an attempt.
PR: 148087
Submitted by: Tom Evans <tevans.uk@googlemail.com>
MFC after: 2 weeks
use uintmax_t instead of float and thereby eliminating the need for
a non-FP version.
Tested on: amd64, ia64 & powerpc (book-E)
Suggested by: bde
MFC after: 1 month
the core changes but left out the shared code, lol.
Well, and a couple fixes to the core... hopefully
this will all be complete now.
Happy happy joy joy :)
int.
- Use errx(3) instead of err(3) to print the error message on short
reads in readlabel(). errno won't be set on short reads which can
easily occur here due to the fixed size read request.
PR: 144307
Reviewed by: bde
What this provides is support for the 'virtual function'
interface that a FreeBSD VM may be assigned from a host
like KVM on Linux, or newer versions of Xen with such
support.
When the guest is set up with the capability, a special
limited function 82576 PCI device is present in its virtual
PCI space, so with this driver installed in the guest that
device will be detected and function nearly like the bare
metal, as it were.
The interface is only allowed a single queue in this configuration
however initial performance tests have looked very good.
Enjoy!!
Previously, the caller unlocked the page, and vm_pageout_clean()
immediately reacquired the page lock. Also, assert rather than test
that the page is neither busy nor held. Since vm_pageout_clean() is
called with the object and page locked, the page can't have changed
state since the caller verified that the page is neither busy nor
held.
one or more mappings to the bogus page must be replaced, call pmap_qenter()
just once. Previously, pmap_qenter() was called for each mapping to the
bogus page.
MFC after: 3 weeks
specific to hp300. Since FreeBSD does not support hp300, hp300 has
been removed from the condition altogether.
The FP version broke profiling on powerpc due to invalid results.
Casting to double instead of float resolved the issue, but with
Book-E not having a FP unit, the non-FP version looked preferrable.
Note that even on AIM hardware the FP version yielded an invalid
value for s_scale, so the problem is most likely with the compiler
or with the expression itself.
limit the advertised speed of an SFP+ to 1G, effectively
"forcing" link at that lower speed. It is off by default
and is enabled by sysctl dev.ix.0.force_gig=1, 0 will
set it back to the norm.
Unless $! has been referenced for a particular job or $! still contains that
job's pid, forget about it after it has terminated. If $! has been
referenced, remember the job until the wait builtin has reported its
completion (either with the pid as parameter or without parameters).
In interactive mode, jobs are forgotten after termination has been reported,
which happens before primary prompts and through the jobs builtin. Even
then, though, remember a job if $! has been referenced.
This is similar to what is suggested by POSIX and should fix most memory
leaks (which also tend to cause sh to use more CPU time) with long running
scripts that start background jobs.
Caveats:
* Repeatedly referencing $! without ever doing 'wait', like
while :; do foo & echo started foo: $!; sleep 60; done
will still use a lot of memory and CPU time in the long run.
* The jobs and jobid builtins do not cause a job to be remembered for longer
like expanding $! does.
PR: bin/55346
The mpt driver previously didn't report a 'maxio' size to CAM, and so the
da(4) driver limited I/O sizes to DFLTPHYS (64K) by default. The number
of scatter gather segments allowed, as reported to busdma, was
(128K / PAGE_SIZE) + 1, or 33 on architectures with 4K pages.
Change things around so that we wait until we've determined how many
segments the adapter can support before creating the busdma tag used for
buffers, so we can potentially support more S/G segments and therefore
larger I/O sizes.
Also, fix some things that were broken about the module unload path. It
still gets hung up inside CAM, though.
mpt.c: Move some busdma initialization calls in here, and call
them just after we've gotten the IOCFacts, and know how
many S/G segments this adapter can support.
mpt.h: Get rid of MPT_MAXPHYS, it is no longer used.
Add max_cam_seg_cnt, which is used to report our maximum
I/O size up to CAM.
mpt_cam.c: Use max_cam_seg_cnt to report our maximum I/O size to CAM.
Fix the locking in mpt_cam_detach().
mpt_pci.c: Pull some busdma initialization and teardown out and put
it in mpt.c. We now delay it until we know many scatter
gather segments the adapter can support, and therefore
how to setup our busdma tags.
mpt_raid.c: Make sure we wake up the right wait channel to get the
raid thread to wake up when we're trying to shut it down.
Reviewed by: gibbs, mjacob
MFC after: 2 weeks
This prevents a kernel fault by dividing with zero because the initial
rate was 0 and didn't be initialized.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
changed to RUN because ic->ic_newassoc isn't set anywhere now. In the
previous bwi_newassoc() is used to initialize AMRR rate routines.
Tested by: Warren Block <wblock at wonkity.com>
MFC after: 3 days
- Rename tdsignal() to tdsendsignal() and make it private to kern_sig.c.
- Add tdsignal() and tdksignal() routines that mirror psignal() and
pksignal() except that they accept a thread as an argument instead of
a process. They send a signal to a specific thread rather than to an
individual process.
Reviewed by: kib
"match" processing at the end of inner loop would look ahead into the next
rule, which is incorrect. Particularly, in the case when the next rule
started with F_NOT opcode it was skipped blindly.
To fix this, exit the inner loop with the continue operator forcibly and
explicitly.
PR: kern/147798
